Inaction levels for the red imported fire ant, Solenopsis invicta (hym.: formicidae): A predator of the boll weevil, Anthonomus grandis (col.: curculionidae)

The density of red imported fire ants, Solenopsis invicta Buren (Hymenoptera: Formicidae), necessary to limit boll weevil abundance, Anthonomus grandis Boheman (Coleoptera: Curculionidae), below the action level was determined. An inaction level of 0.4 fire ants per shake bucket sample (i.e., four ants per 10 plant terminals) will provide boll weevil control approximately 90% of the time. A dynamic inaction level is also provided. Total mortality of boll weevil developmental stages including eggs through teneral adults averaged 97.9%. Of 100 boll weevil eggs deposited in cotton squares (flower buds), an average of two adults survive of which about half are female. Thus, the net replacement rate per generation (R_o is 1.0 which, in this case, indicates a stable boll weevil population.     

西山白家庄矿8煤可排放硫含量的测定

针对西山白家庄矿8煤的实际情况，初步尝试了测定其硫的实际排放状况，探索了温度及添加剂对可排放 硫含量的影响。结果表明该煤的自身固硫率不高； 添加9％的CaO可排放硫含量可以达到城市窑（锅）炉对硫分的要求；同时试验表明MgO对可排放硫影响不大。     

湿式脱硫除尘技术在开发应用中的几点看法

当前,随着经济的快速发展,全国燃煤量不断增加,二氧化硫、烟尘超标排放已导致严重的环境污染问题.二氧化硫、烟尘排放量的控制,可采用选用清洁煤,改变燃烧技术及末尾脱硫除尘技术.比较而言,烟气除尘脱硫技术是一种技术成熟较为经济的应用技术.其中湿式脱硫除尘技术已得到广泛推广与应用,但该技术中仍存在不能消除黑烟、二氧化硫脱除不稳定因素多、设备腐蚀问题.本文通过对实际测试结果分析及脱硫效率影响因素的分析,提出了相应的看法与建议.     

电化学法烟气脱硫制取浓硫酸

利用电化学脱硫生产硫酸是一种自然资源再利用的新型大气环保技术 ,它通过电解I- /I2 体系生成I2 来吸收氧化烟气中的SO2 ,其脱硫率可达 95%～ 99% ,并生成 85%以上的高浓度硫酸和纯氢。以期获得废渣废液的零排放。     

石英表面配合物与溶解动力学模型

阐述了石英表面配合物和溶解动力学机理之间的关系，指出了石英的反应性主要受负电性表面物种的控制，从而导致电解质、离子强度、pH等因素对石英溶解的催化效应．溶解达率的提高与反应活化能的降低成活化熵的增大有关。最后，介绍了在过渡态理论和表面反应模型基础上建立的石英溶解速率方程。     

Electrochemical study of sulfide solution in the presence of surfactants

Voltammetric curve studies on aqueous Na2S solution in the presence of three types of surfactants are presented. Presence of anodic surfactant (HTAB) in creases anode current density and makes the corresponding anode peak potential shift to more negative. Potentials of the reduction of elemental sulfur to intermediates Sx2-shift to more negative with the increasing of HTAB concentrations. In the presence of HTAB, the anode current density at 77oC increases more than at 34oC. The electrolysis indicates that anodic product sulfur loosely adhered to the graphite electrode surface when HTAB is added to the anolyte. The total efficiency of producing sulfur is high after several times of cycle electrolysis.The results show that anode passivation is minimized in the presence of HTAB. The depassivation effect of HTAB is discussed.     

二氧化氯预氧化工艺处理微污染黄河水研究

对二氧化氯预氧化工艺替代预加氯系统处理低温、含异味和较高色度的黄河原水进行了综合研究。与预氯化、混凝沉淀系统相比，二氧化氯预氧化、混凝沉淀系统对藻类的去除率提高了30％～40％，使嗅和味的阚值降低了10～20，但CODmn和氨氮的去除率的变化不明显。由于进水色度变化较大，对色度的去除率变化也不明显。运行证明，该系统改造后对降低以微污染黄河水为水源的北方给水处理厂冬季运行过程中的出水嗅和味的阚值、增加藻类的去除率具有明显的效果，同时，运行费用也较低。     

水葫芦对Zn2+、Cd2+和Fe3+的去除速率

通过静态水培实验和原子吸收分光光度法的测定,发现水葫芦对个别重金属离子累积去除率头两天为Zn≈Cd>Fe,以后为Fe>Zn>Cd;5天中,Cd2 在水葫芦老黄茎叶中的积累量增长了130 0倍;在混合离子培养液中,Zn2 的去除速率明显下降,而Cd2 和Fe3 变化不明显。表明水葫芦在治理含镉废水方面有良好的应用前景。     

测空气中SO2时的主要影响因素

目前测定空气中SO2主要采用甲醛吸收-副玫瑰苯胺分光光度法。该法操作比较严格，测试结果的准确度受诸多因素的影响。因此文中对这些影响因素进行了探讨，主要为试剂质量、显色温度和显色时间、溶液加入顺序、比色皿、空气采样器流量、采样温度、导气管的吸附等因素对测定结果的影响进行了探讨。     

Carbon Dioxide Balance of Wood Substitution: Comparing Concrete- and Wood-Framed Buildings

In this study a method is suggested to compare the net carbon dioxide (CO₂) emission from the construction of concrete- and wood-framed buildings. The method is then applied to two buildings in Sweden and Finland constructed with wood frames, compared with functionally equivalent buildings constructed with concrete frames. Carbon accounting includes: emissions due to fossil fuel use in the production of building materials; the replacement of fossil fuels by biomass residues from logging, wood processing, construction and demolition; carbon stock changes in forests and buildings; and cement process reactions. The results show that wood-framed construction requires less energy, and emits less CO₂ to the atmosphere, than concrete-framed construction. The lifecycle emission difference between the wood- and concrete-framed buildings ranges from 30 to 130 kg C per m² of floor area. Hence, a net reduction of CO₂ emission can be obtained by increasing the proportion of wood-based building materials, relative to concrete materials. The benefits would be greatest if the biomass residues resulting from the production of the wood building materials were fully used in energy supply systems. The carbon mitigation efficiency, expressed in terms of biomass used per unit of reduced carbon emission, is considerably better if the wood is used to replace concrete building material than if the wood is used directly as biofuel.