纳米氧化石墨烯对水中锶的吸附特征

采用纳米氧化石墨烯(GO)吸附放射性废水中Sr2+,从吸附原理、吸附动力学、pH对吸附的影响等方面对吸附过程进行研究.采用表面增强拉曼技术和红外光谱对Sr2+在GO表面的吸附进行光谱表征.将GO负载到活性炭表面进行柱实验探索GO在废水处理中的应用.结果表明,在pH值为6.0—6.5时GO对Sr2+的吸附符合Langmuir吸附模型,最大吸附量263.16mg·g-1.GO对Sr2+的吸附符合拟二级动力学方程.在pH3—11范围内吸附量随着pH升高显著增大.GO对Sr2+的吸附具有快速,吸附量大,适用pH范围广的特点,可大量用于放射性废水的处理.GO负载到活性炭上后吸附量有所下降,但克服了GO材料本身在水中粒径小难分离的缺陷,是一种可实际应用、去除环境中Sr2+的新方法.     

石家庄春季大气气溶胶的散射特征

利用2010年5月积分浊度仪、PCASP-X2和能见度仪的观测资料,分析了石家庄大气气溶胶的散射特征及其与气溶胶粒子浓度、能见度、气象条件的关系.结果表明,观测期间,450,550,700nm 3个波段的气溶胶散射系数平均值±标准差分别为(257±293),(199±237)和(143±173)Mm-1,散射系数的变化很大,但气溶胶微物理特征相对比较稳定.散射系数日变化呈3峰分布,峰值出现在8:00、13:00和0:00.以550nm波长为例,气溶胶散射系数的变化范围为144~308Mm-1,夜间散射系数大于白天,非晴天散射系数平均值(524.9Mm-1)是晴天散射系数(112.3Mm-1)的4.7倍.气溶胶3个波段后向散射比均大于0.15,说明石家庄细粒子污染比较严重.散射系数和体积浓度成正比,但由于局地气象条件和污染源的影响,有气溶胶体积浓度变大,散射系数变化不大的情况出现.气溶胶散射系数和能见度呈负相关;根据Koschmieder公式计算得到的能见度,能较好反映实际观测情况.当大气相对湿度较高时,气溶胶散射系数随湿度增大呈现两种不同的变化趋势,即一部分气溶胶的散射系数有明显的增大,而另一部分则随着相对湿度的增加并未增大,反而比干气溶胶散射系数要小.局地风场也会影响气溶胶散射特性.     

利用SPR技术测定湖水中微囊藻毒素

利用表面等离子共振(SPR)技术,建立了快速定量检测湖水中微囊藻毒素LR(MC-LR)的方法.将MC-LR共价偶联到表面等离子共振芯片表面,检测了芯片的稳定性,并利用免疫竞争抑制原理构建标准曲线,对湖水样品进行了检测.结果表明:制备的芯片信号稳定,50个循环相对标准偏差(RSD)为0.62%;该方法的最低检测浓度为0.25ng/mL,可作为水体中MC-LR的分析检测方法.     

表面增强拉曼散射技术鉴别大肠杆菌和志贺氏菌的研究

以整个大肠杆菌和志贺氏菌为研究对象,通过和纳米银颗粒混合制片,利用表面增强拉曼效应检测并区分大肠杆菌和志贺氏菌.结果表明,未与纳米银颗粒混合的大肠杆菌和志贺氏菌没有明显的拉曼信号,而与纳米银颗粒混合后有明显的拉曼信号,二者有明显的区别,且重现性良好,可为鉴别大肠杆菌和志贺氏菌病原体研究及实际应用提供依据.     

市政污水二级出水中溶解性有机质在紫外/氯处理过程中的转化特性

紫外/氯高级氧化技术是一种新型的水处理技术,可有效氧化去除多类有机污染物,但目前较为缺乏紫外/氯处理真实污水过程中溶解性出水有机质（dEfOM）转化特性的研究.采用紫外光谱、荧光光谱和傅里叶变换离子回旋共振质谱（FT-ICR-MS）探究了两个市政污水二级出水中dEfOM在紫外/氯处理过程中的转化特性,同时对该过程中形成的氯代副产物（Cl-BPs）进行了分析.结果表明,紫外/氯可以有效去除dEfOM中的芳香族化合物和荧光物质,且大部分物质只是发生了化学转化而非矿化,其中主要荧光组分蛋白质最先发生反应;部分CHOS类物质发生降解并生成CHO类物质,该过程优先去除大分子不饱和及还原性物质,并生成小分子饱和及氧化性物质.此外,紫外/氯处理使得三卤甲烷和卤乙酸的产生量明显增加,处理后的两个二级出水中分别检测出255种和133种Cl-BPs.利用分子质量差异分析共鉴别出了12对基于亲电取代和43对基于加成反应的前体物-反应产物对.本研究可为紫外/氯技术的实际水处理应用提供基础信息参考.     

Currarino triad: concurrent US and MRI diagnosis in the fetus and the mother

We report an unusual case of the complete Currarino triad diagnosed in a fetus at 21 weeks' gestation by means of prenatal ultrasonography (US). The highly suspicious findings in the fetus were accompanied by analogous US findings in the mother who suffered from mild symptoms of up to that time unrecognized Currarino triad. Consecutively, magnetic resonance imaging (MRI) confirmed the findings simultaneously in the fetus and in her mother. This is the first report describing the prenatal diagnosis of Currarino triad without the background of positive family history. To our knowledge, the prenatal MRI findings of Currarino triad have not yet been published. Copyright © 2002 John Wiley & Sons, Ltd.     

Klippel–Trenaunay–Weber (KTW) syndrome: the use of in utero magnetic resonance imaging (MRI) in a prospective diagnosis

The diagnosis of the Klippel–Trenaunay–Weber (KTW) syndrome is rarely made antenatally. We report the use of both ultrasound and in utero magnetic resonance imaging (MRI) in the prenatal diagnosis of this syndrome. This is the first report of the use of prenatal MRI in the diagnosis of this condition. There was concordance in the findings of both modalities, with limb hypertrophy, and multiple haemangiomata – both subcutaneous and internally – demonstrated with ultrasound and MRI. The patient elected to terminate the pregnancy because of associated oligohydramnios and a small fetal chest noted at 20 weeks. The postmortem examination confirmed the antenatal diagnosis. Copyright © 2001 John Wiley & Sons, Ltd.     

Speciation and quantitation of degradation products of silicones (Silane/Siloxane Diols) by gas chromatography—mass spectrometry and stability of dimethylsilanediol

Gas chromatography-mass spectrometry (GC-MS) methodology was developed to speciate and quantitate several degradation products of polydimethylsiloxane (PDMS) in soil. We have demonstrated that the major degradation product,viz., dimethylsilanediol, can be readily analyzed by GC-MS without derivatization as commonly practiced in analyzing such materials. A mixture of linear siloxane diols (n = 1–5, wheren is the number of Me₂SiO units), and cyclic dimethylsiloxanes (n = 4–6) was resolved by GC-MS. We also found that peak identity of various diols required that GC-MS is done in the chemical ionization (CI) mode, since the electron impact (EI) ionization mode produced similar mass fragmentation patterns for diols and cyclics containing the same number of silicon atoms. For siloxane diols, detection limits ranged from 100 pg (forn = 1) to 1 ng (for n = 5). For cyclics, the detection limit was about 1 pg. Dimethylsilanediol, known to be unstable even in the solid state, was shown by NMR techniques to be stable in aqueous solution at <0.1% concentration. A 100-ppm solution was stable for over a year. Purity check for dimethylsilanediol is best carried out by Si-29 solid-state NMR technique.