MFC-MBR耦合系统运行效果

膜生物反应器(MBR)是一种高效的污水处理工艺,而微生物燃料电池(MFC)能有效降解污泥中的胞外生物有机质(EBOM)并回收电能.将MFC与MBR联用,建立了一套能够有效抑制膜污染同时回收电能的新系统——MFC-MBR耦合系统,MBR的剩余污泥经MFC处理后回流.以传统MBR为对照,对耦合系统中污水处理效果、膜污染情况和污泥混合液的性质进行研究.研究表明,耦合系统的污水处理效果没有明显恶化,COD去除率为94％,NH4+-N的去除率为92％.耦合系统能够有效减缓膜污染的发生,清洗周期延长了28％.污泥混合液的MLVSS/MLSS稳定在80％ ～ 88％,系统内几乎没有无机颗粒积累.松散结合态胞外聚合物(LB-EPS)降低了48％,使污泥混合液性质得到改善.较低的污泥比阻(2.69×1012m/kg)和标准化毛细吸水时间(1.67 s·L/g MLSS),证明耦合系统污泥混合液脱水性能提高了.     

Rain‐washing of foliar deposits of Dimilin®WP‐25 formulated in four different carrier liquids

Abstract

Dimilin^® WP‐25, a wettable powder formulation of diflubenzuron (DFB) [1‐(4‐chlorophenyl)‐3‐(2,6‐difluorobenzoyl) urea], was formulated in four different carrier liquids, viz., water; a light petroleum paraffinic oil, ID 585; a heavy paraffinic oil, Sunspray^® 7N; and a 1:2 mixture of a light petroleum aromatic solvent (Cyclosol^® 63) and canola oil; to provide four end‐use mixtures, Dim‐W, Dim‐585, Dim‐7N and Dim‐Cy‐C respectively, each containing 28 g of DFB per litre. Balsam fir branch tips clipped from greenhouse‐grown seedlings, and sugar maple branch tips clipped from field‐grown young trees, were exposed to uniform‐sized droplets (ranging in diameters from 135 to 190 μm) of the four end‐use mixtures which were atomized using a monodispersed droplet generator. Droplets were collected on the fir and maple branch tips and the initial residue per g fresh weight of foliage was determined by high‐performance liquid chromatography (HPLC). The branch tips were exposed to cumulative rainfall of 3, 6 and 10 mm at an intensity of 5 mm/h and at time intervals of 1, 12, 36 and 72 h after DFB treatment, to test the influence of ‘ageing’ of foliar residues on rainfastness. Foliar samples were collected for residue determination just before the onset of rainfall, and at 0.5 h post‐rain. DFB was quantified by the HPLC method. In the case of fir foliage, the Dim‐W formulation was the most susceptible to rain‐washing and the rainfastness did not increase with the ageing period of foliar deposits. In contrast, the three oil‐based mixtures showed greater rainfastness depending upon the carrier liquid and the ageing period. Rainfastness decreased in the order of Dim‐Cy‐C > Dim‐7N > Dim‐585 > Dim‐W. In contrast, the data on maple foliage indicated that the ageing of deposits increased the rainfastness of all the 4 end‐use mixtures. Dim‐585 was the most susceptible to rain washing, and rainfastness decreased in the order of Dim‐W > Dim‐Cy‐C > Dim‐7N > Dim‐585.     

中国碳捕集、利用与封存技术研发与示范

碳捕集、利用与封存(CCUS)是一项新兴的、具有大规模减排潜力的技术,有望实现化石能源使用的CO2近零排放,被认为是进行温室气体深度减排最重要的技术路径之一.开展CCUS技术的研发和储备,将为中国未来温室气体减排提供一种重要的战略性技术选择,受到政府、企业和学术界的广泛关注.本文从CCUS技术产生和发展的背景出发,概括了该技术的特点及存在的主要同题,总结了当前中国CCUS技术政策,介绍了中国CCUS技术研发、试点示范、国际合作等的开展情况,并通过与欧美等发达国家CCUS技术发展与示范活动现状的对比,初步分析了中国CCUS技术发展方面存在的主要不足.为进一步推动我国CCUS技术的研发与示范,文章提出应加强国家层面的技术政策指导和宏观协调、引导资源有效配置；推动建设行业间的CCUS技术合作平台；重视CCUS来来技术应用软环境建设等有针对性的建议.     

A hybrid method for quasi-three-dimensional slope stability analysis in a municipal solid waste landfill

Limited space for accommodating the ever increasing mounds of municipal solid waste (MSW) demands the capacity of MSW landfill be maximized by building landfills to greater heights with steeper slopes. This situation has raised concerns regarding the stability of high MSW landfills. A hybrid method for quasi-three-dimensional slope stability analysis based on the finite element stress analysis was applied in a case study at a MSW landfill in north-east Spain. Potential slides can be assumed to be located within the waste mass due to the lack of weak foundation soils and geosynthetic membranes at the landfill base. The only triggering factor of deep-seated slope failure is the higher leachate level and the relatively high and steep slope in the front. The valley-shaped geometry and layered construction procedure at the site make three-dimensional slope stability analyses necessary for this landfill. In the finite element stress analysis, variations of leachate level during construction and continuous settlement of the landfill were taken into account. The "equivalent" three-dimensional factor of safety (FoS) was computed from the individual result of the two-dimensional analysis for a series of evenly spaced cross sections within the potential sliding body. Results indicate that the hybrid method for quasi-three-dimensional slope stability analysis adopted in this paper is capable of locating roughly the spatial position of the potential sliding mass. This easy to manipulate method can serve as an engineering tool in the preliminary estimate of the FoS as well as the approximate position and extent of the potential sliding mass. The result that FoS obtained from three-dimensional analysis increases as much as 50% compared to that from two-dimensional analysis implies the significance of the three-dimensional effect for this study-case. Influences of shear parameters, time elapse after landfill closure, leachate level as well as unit weight of waste on FoS were also investigated in this paper. These sensitivity analyses serve as the guidelines of construction practices and operating procedures for the MSW landfill under study.     

新型结构ABR的设计与水力特性研究

针对ABR自身的缺点,设计出一种新型结构的ABR.该反应器为双层结构,共有5部分组成,各部分容积各不相同.该反应器的设计思想是将ABR与生物滤池以及活性炭吸附等工艺相联合.这种设计能够最大程度地发挥各工艺的优势,进而达到更好的处理效果.通过脉冲响应实验对该反应器的水力特性进行研究,得出不同水力停留时间(HRT)下的停留...     

Adsorption of Pb(II) on variable charge soils amended with rice-straw derived biochar

Two Ultisols and one Oxisol from tropical regions of southern China were incubated with rice straw biochar to investigate the effect of biochar on their surface charge and Pb(II) adsorption using batch methods. The incorporation of biochar induced a remarkable increase in soil cation exchange capacity after 30 d of incubation. The incorporation of biochar significantly increased the adsorption of Pb(II) by these variable charge soils; the enhancement of adsorption of Pb(II) by these soils increased with the addition level of biochar. Adsorption of Pb(II) involved both electrostatic and non-electrostatic mechanisms; however, biochar mainly increased Pb(II) adsorption through the non-electrostatic mechanism via the formation of surface complexes between Pb²⁺ and functional groups on biochar. There was greater enhancement of biochar on the non-electrostatic adsorption of Pb(II) by the variable charge soils at relatively low pH. Therefore, the incorporation of biochar decreased the activity and availability of Pb(II) to plants through increased non-electrostatic adsorption of Pb(II) by acidic variable charge soils.     

填埋场不同深度垃圾土压缩性的室内试验研究

阐述了垃圾土的压缩机理,归纳了国内外垃圾土压缩性指标的研究成果。根据某填埋场3个不同深度的垃圾土试样,在改装后的高压固结仪上进行压缩试验,得到垃圾土的压缩系数a、主压缩指数C、修正主压缩指数C'、压缩模量E以及体积压缩系数m,并对试验结果进行分析。试验结果表明,垃圾土的初始孔隙比随填埋深度的增加而减小,垃圾土的压缩指数随其可降解度和有机质含量的减少而降低,垃圾土具有高压缩性,其压缩性指标与垃圾的组成和填埋深度有关。将得到的压缩性指标与国内外的资料进行了比较,可为填埋场的设计及变形计算提供参考。     

等离子体固态可燃物液化反应动力学分析

本文利用介质阻挡放电等离子体技术,对以煤和生物质为代表的固态可燃物液化反应机理进行研究,以期探索能源利用新途径.借助碰撞理论和Boltzman方程,对高能电子碰撞引发多种离解反应的速率常数进行数值模拟,计算结果和实验曲线对比,证明模型具有一定的适用性和可靠性.在一定的电子温度下,通过不同离解反应速率常数的对比,可以判断...     

HRT对固定床厌氧反应器运行效果的影响

为了考察水力停留时间(HRT)对炭纤维载体固定床厌氧反应器运行效果的影响,在进水COD分别为20 000~25 000 mg/L和40 000~45 000 mg/L2个浓度范围下,研究了不同HRT对反应器运行效果的影响。结果表明,通过HRT的调整,在达到相同有机负荷(OLR)下,进水COD为20 000~25 000 mg/L的COD去除率和产气量,明显比进水COD为40 000~45 000 mg/L的运行效果好;进水COD为20 000~25 000 mg/L,HRT为14 h,相应的OLR为41.09 kgCOD/(m3.d)时,COD去除率仍然维持在68%以上,沼气容积产气率达到14.55 m3/(m3.d)。炭纤维载体固定床厌氧反应器具有较高的COD去除率、产气效率以及抵抗低pH、高负荷冲击的能力,运行过程中没有发生反应器堵塞的现象。     

祁连山北坡自然恢复杨桦林地植物功能型组成及其影响因素

依据生活型(乔木、藤本、灌木、半灌木、多年生禾草、多年生杂类草和一二年生草本)和水分生态型(旱生、旱中生、中生和湿生)将祁连山北坡次生杨桦林28个调查样地中的81个物种划分为18种植物功能型(Plant functiontypes,PFTs),并通过典范对应分析(CCA)方法研究植物功能型与环境因子间的关系.结果表明:自然恢复杨桦林地植物功能型主要集中在中生多年生杂类草(PFTs16)、湿生多年生杂类草(PFTs23)、旱中生多年生杂类草(PFTs9)和中生灌木(PFTs18)4个植物功能型上;乔、灌、草三层冠层特征和中生植物的大量出现,反映了群落植物生活型趋于复杂化和结构化,生态型逐渐向中生化方向演替的特点;土壤容重、有机碳和全氮含量主要影响植物的生活型分异特征,土壤含水量和林冠郁闭度是植物的水分生态型分异的主要环境因子,而坡位、坡度控制着群落植物总体分布格局的形成.图1表3参31