电子产品虚拟试验评估技术综述

介绍了虚拟试验技术在电子产品评估鉴定中的应用方法。首先论述了虚拟试验技术产生的背景及其技术优势。然后结合国外的研究状况,重点对电子产品虚拟试验评估技术的基本流程和涉及的关键技术作了总结和归纳。最后,指出虚拟试验技术在电子产品评估中具有广阔的应用前景。     

考虑应变速率影响的混凝土重力坝非线性地震响应分析

通过引入应变速率、损伤变量以及刚度退化指标等参数,建立了应变率相关的混凝土弹塑性损伤模型。运用该模型对某重力坝厂房坝段分别就率相关及率无关两种情况进行了三维非线性地震响应时程分析。深入研究了混凝土应变速率等相关特性对结构动力响应的影响。结果表明,应变速率对混凝土的力学性能有一定的影响,随着应变速率的增加,坝体结构的变形减小,主拉应力有所提高,应变能有所减小以及开裂损伤有一定的降低。所得结论对混凝土重力坝的震害研究有一定的参考价值。     

拉索预应力空间网格结构的索张力计算及张拉全过程分析

实际工程中,对于拉索预应力空间网格结构的索张拉是一个需要反复调整的繁琐过程。对此,提出了一种针对多阶段多批次张拉施工全过程分析的计算方法,用以提高索张拉施工的效率。该法通过不断减小拉索实际张力与目标张力的差值来求解各索在张拉过程中应该产生的初始应变,最后只要利用计算结果并按照预定的顺序张拉,便可使所有索只经过一次张拉就能最终达到各自的目标张力值。对一个150 m跨度的拉索预应力球面巨型网格结构进行了计算,并利用计算结果,对结构的杆件内力和最大节点位移进行了张拉全过程跟踪分析。结果表明,在实际工程中采用上述方法进行计算与张拉是切实可行的,另外,在张拉过程中进行跟踪分析十分必要。     

基于渗流-应力耦合分析的野鸡尾尾矿坝稳定性研究

基于渗流场与应力场耦合机理,对柿竹园野鸡尾尾矿坝进行稳定性研究。研究渗流-应力的耦合效应,提出了渗流-应力耦合以及渗流体积力计算的实施方案;建立二维的有限元渗流-应力耦合计算模型,分析了考虑耦合效应时的尾矿坝渗流场、位移场、应力场;最终分析了不同耦合关系对于渗流量、位移场、等效渗透集中力以及应力场的影响。研究结果表明:当前水力条件下,尾矿坝稳定性良好;尾矿坝主要受水平渗透力作用,初期坝坝顶、坝脚以及坝底等处应力集中;尾矿坝的渗流-应力作用不容忽视,不同的耦合关系对于x方向位移、渗透力的预测影响巨大;考虑渗流-应力耦合关系得到的主应力、剪应力以及竖向位移,比不考虑耦合效应时大。     

基于几何参数的优化对双层柱面网壳结构动力性能的影响

以双层柱面网壳为研究对象,采用参数化设计语言APDL对AN SY S进行二次开发,实现了任意跨度双层柱面网壳的自动建模、加载、施加约束及求解。借此平台对柱面网壳结构进行模态和地震反应分析。首先,分析了结构自振特性随几何参数变化的特点,研究了结构的基频随矢跨比和网壳厚度的变化规律,结果表明,当矢跨比在1/3.6~1/5该范围内,结构的整体刚度较大;网壳厚度在1.8~2.1 m时,网壳整体刚度较大;对于矢跨比一定的网壳,随着厚度的增加,杆件的动内力大多增加,横向弦杆的二维与单维动内力比值有所增加,而纵向弦杆的二维与单维动内力则变化不大。然后,对网壳进行不同几何参数下的地震反应分析,给出了最大节点位移和最大杆件轴应力随几何参数变化的时程响应曲线,揭示了这类网壳的地震反应特点。     

Baseline soil levels of PCDD/Fs established prior to the construction of municipal solid waste incinerators in China

In order to determine the baseline contamination by polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) in different areas in China, prior to the construction of municipal solid waste incinerators (MSWIs), a total of 32 representative soil samples was collected near 16 incinerators and analyzed for their PCDD/F concentrations. The PCDD/F baseline concentrations in the soil samples ranged from 0.32 to 11.4 ng I-TEQ kg⁻¹ (dry matter), with average and median value of 2.73 and 2.24 ng I-TEQ kg⁻¹ (dry matter), respectively, and a span between maximum and minimum recorded value of 36. The PCDD homologues predominated in 26 out of 32 soil samples, with the ratio (PCDDs)/(PCDFs) ranging from 1.1 to 164; however in the other 6 samples, PCDF homologues were larger, with the same ratio varying from 0.04 to 0.8. Principal component analysis (PCA) and hierarchical cluster analysis (HCA) were used to examine PCDD/F amount and profile in these soil samples, and their possible associations with known emission sources: in this process 6 really distinct isomer fingerprints were identified. Background PCDD/F levels and profiles were comparable to those found in soils from China and other countries and indicate a rather low baseline PCDD/F contamination of soils. The present data provide the tools for future assessment of a possible impact of these MSWIs.     

BPA暴露对本体和子代胰岛β细胞转录组差异对比分析

双酚A(BPA)作为一种典型的环境内分泌干扰物,与二型糖尿病和肥胖症等代谢类疾病密切相关.在这项研究中,旨在探讨BPA直接暴露以及围产期暴露对本体和子代胰岛β细胞影响的差异,从而实现对不同易感人群的精准预防与治疗.通过对GEO数据库中GSE126297和GSE82175两个数据集进行分析,共筛选出108个共有的差异基因...     

Study of lignocellulosic biomass ignition properties estimation from thermogravimetric analysis

In the last decade, the use of renewable resources has increased significantly in order to reduce the energetic dependence on fossil fuels, as they have an important contribution to the global warning and greenhouse gasses effect. Because of that, research on biofuels has been increased in the last years as its characteristics of use match those of the conventional fuel's: solid biomass can be used instead of coals, and biodiesel could replace diesel. Research on solid biomass ignition properties has been considerably developed because of the amount of industrial accidents related to the treatment and use of solid biomass (self-ignition, dust explosions, etc.). On the other hand, thermogravimetric analysis (TGA) is becoming and important characterization technique as it can be used to determine a wide spectrum of properties, such as kinetics, composition, proximate analysis, etc. This research aims to combine thermal analysis and ignition properties, by using the TGA to obtain the elemental composition of lignocellulosic biomass and compare those results to Minimum Ignition Energy (MIE) values test output, so a relation between composition and MIE can be found.To achieve this aim, biomass samples from different origins have been used: oil palm wastes (empty fruit bunches, mesocarp fiber and palm kernel shell), agricultural wastes (straw chops) and forestry wastes (wood chips and wood powder). Also, raw materials and torrefied biomass were compared. The hemicellulose/cellulose ratio was calculated and compared to different flammability properties, finding out that the greater the ratio and the lower the onset temperature (temperature at which the pyrolysis reaction accelerates), the lower was the minimum ignition energy. From this basis it was possible to define “tendency areas” that grouped the samples whose MIE values were similar. Three tendency areas were found: high minimum ignition energy, medium minimum ignition energy, and low ignition energy.     

Molecular composition of recycled organic wastes,as determined by solid-state 13C NMR and elemental analyses

Using solid state ¹³C NMR data and elemental composition in a molecular mixing model, we estimated the molecular components of the organic matter in 16 recycled organic (RO) wastes representative of the major materials generated in the Sydney basin area. Close correspondence was found between the measured NMR signal intensities and those predicted by the model for all RO wastes except for poultry manure char. Molecular nature of the organic matter differed widely between the RO wastes. As a proportion of organic C, carbohydrate C ranged from 0.07 to 0.63, protein C from <0.01 to 0.66, lignin C from <0.01 to 0.31, aliphatic C from 0.09 to 0.73, carbonyl C from 0.02 to 0.23, and char C from 0 to 0.45. This method is considered preferable to techniques involving imprecise extraction methods for RO wastes. Molecular composition data has great potential as a predictor of RO waste soil carbon and nutrient outcomes.     

Implications of different population model structures for management of threatened plants

Population viability analysis (PVA) is a reliable tool for ranking management options for a range of species despite parameter uncertainty. No one has yet investigated whether this holds true for model uncertainty for species with complex life histories and for responses to multiple threats. We tested whether a range of model structures yielded similar rankings of management and threat scenarios for 2 plant species with complex postfire responses. We examined 2 contrasting species from different plant functional types: an obligate seeding shrub and a facultative resprouting shrub. We exposed each to altered fire regimes and an additional, species‐specific threat. Long‐term demographic data sets were used to construct an individual‐based model (IBM), a complex stage‐based model, and a simple matrix model that subsumes all life stages into 2 or 3 stages. Agreement across models was good under some scenarios and poor under others. Results from the simple and complex matrix models were more similar to each other than to the IBM. Results were robust across models when dominant threats are considered but were less so for smaller effects. Robustness also broke down as the scenarios deviated from baseline conditions, likely the result of a number of factors related to the complexity of the species’ life history and how it was represented in a model. Although PVA can be an invaluable tool for integrating data and understanding species’ responses to threats and management strategies, this is best achieved in the context of decision support for adaptive management alongside multiple lines of evidence and expert critique of model construction and output.