双壳类壳体时间序列的建立方法及存在的问题

利用双壳类壳体提取古气候古环境信息是生物碳酸盐研究的热点,而壳体定年一直是研究中的难点。相关研究主要观点是先找到一些时间控制点,再按照线性内插法来确定壳体的时间序列。本文综述了国内外目前双壳类壳体定年的常用方法,根据时间控制点的获得将这些方法归为以下几类:壳体日生长层法、壳体氧同位素法、数字图像技术法和微量元素法,介绍并讨论了每种方法的应用和存在的不足。研究者应该根据具体研究的生物和环境选择适合的方法。     

基于云模型的富水岩溶隧道涌水风险评价*

为适应风险因素不确定性、随机性及动态反馈性等特点,建立新型富水岩溶隧道涌水风险评价体系,提出1种基于云模型的模糊综合评价方法。选取5个1级指标、29个2级指标构建评价指标体系;综合层次分析、熵权与加权平均计算法合理分配各指标权重;利用云生成算法计算出云数字特征参数并生成足够数量的云滴;将方法应用于贵州省某隧道涌水风险评价。结果表明:隧道综合云模型云滴大部分处于“中度风险”与“高度风险”之间,与实际开挖及地质雷达分析结果一致。所提出的基于云模型的模糊综合评价法对富水岩溶隧道涌水风险评估提供良好的实践参考,为日后隧道质量控制和寿命评估提供参考。     

Efficient Delineation of Nested Depression Hierarchy in Digital Elevation Models for Hydrological Analysis Using Level‐Set Method

In terrain analysis and hydrological modeling, surface depressions (or sinks) in a digital elevation model (DEM) are commonly treated as artifacts and thus filled and removed to create a depressionless DEM. Various algorithms have been developed to identify and fill depressions in DEMs during the past decades. However, few studies have attempted to delineate and quantify the nested hierarchy of actual depressions, which can provide crucial information for characterizing surface hydrologic connectivity and simulating the fill‐merge‐spill hydrological process. In this paper, we present an innovative and efficient algorithm for delineating and quantifying nested depressions in DEMs using the level‐set method based on graph theory. The proposed level‐set method emulates water level decreasing from the spill point along the depression boundary to the lowest point at the bottom of a depression. By tracing the dynamic topological changes (i.e., depression splitting/merging) within a compound depression, the level‐set method can construct topological graphs and derive geometric properties of the nested depressions. The experimental results of two fine‐resolution Light Detection and Ranging‐derived DEMs show that the raster‐based level‐set algorithm is much more efficient (~150 times faster) than the vector‐based contour tree method. The proposed level‐set algorithm has great potential for being applied to large‐scale ecohydrological analysis and watershed modeling.     

基于数字图像相关方法的石墨高温杨氏模量测试

目的为了得到石墨在高温环境下的杨氏模量,为飞行器热防护系统和高温热结构的设计提供可靠的技术保障。方法基于数字图像相关(DIC)方法和通电电阻加热技术,建立一套测量材料在高温环境下力学性能的测试系统。利用该系统,测量高温下石墨试样的表面应变场和应力-应变曲线,计算相应温度下的杨氏模量。在1400℃实验环境下,采用基于DIC与高温引伸计的方法同时测量超高温陶瓷试件的拉伸应变数据,并进行比较验证。结果在1400℃实验环境下,采用基于DIC与高温引伸计方法测得超高温陶瓷的应变-时间曲线吻合良好,方差为1.3×10-7。1200~1900℃高温环境下,石墨的杨氏模量随温度的升高呈线性增长趋势。结论采用基于DIC方法准确有效,该方法可方便快速地实现对石墨材料在高温环境下杨氏模量的测量。另外,该方法也可应用于其他导电材料杨氏模量的测试。     

结构应力逆向推演模型及其不确定度定量分析

目的 针对现有结构安全在线监测与评估方法存在的短板,结合人工智能方法探索新的解决方案。提出一种基于有限测点应力逆向推演整体结构应力分布的方法,以数据驱动的模式,基于神经网络技术搭建算法模型。方法 以结构有限元仿真数据为基础,运用相关性分析方法,获取代表结构响应特征的有限个测点,利用神经网络方法构建基于有限测点应力推演结构全场应力分布的算法模型。结果 以科学试验平台的连接器结构为对象,开展该算法模型的应用研究,并且对该应用实例下的算法模型开展不确定度分析,推演结果的相对不确定度u95rel为8.6%。结论 该算法模型的推演结果正确反映了结构总体响应特征。从建模过程角度分析,该算法模型的不确定度来源主要包括相关性分析方法、神经网络建模以及模型收敛条件3个方面。     

数字化控制系统信息显示特征对操纵员信息 捕获绩效的影响及优化研究

随着计算机技术和仪控技术的发展,数字化仪控系统逐步在大型控制室得到应用,主控室信息界面随之也出现了 “巨量信息与有限显示”的矛盾。通过分析数字化主控室信息显示的特点,基于认知心理学的相关理论,通过实验研究 信息显示率、信息提供率、数据更新率对操纵员信息捕获绩效的影响。实验结果表明:对操纵员信息捕获绩效影响最主 要的因素是信息显示率,其次是信息提供率,最后是数据更新率;信息显示率与信息提供率对被试信息捕获绩效的影响 具有较高的灵敏度,而数据更新率的变化对被试信息捕获绩效的影响并不显著;信息显示的最佳匹配组合是信息显示率 为56.4 bit,信息提供率为9.4 bit,数据更新率为3 s。研究成果可为数字化主控室信息显示的设计提供理论基础。     

Roles of digital technology in China's sustainable forestry development

China has the fifth largest forest area in the world and any change in China's forestry development will have inevitable impacts on global ecological sustainability. China has undergone excessive logging of natural forests and also made tremendous efforts in afforestation during the past half century. China's forestry is now going through a variety of transitions and several forestry programs have been implemented to drive forestry transitions. The goal of these actions is to protect ecological services of forests and sustain China's forestry development. These forestry programs are spatially sophisticated and cannot be successfully implemented without accurate and transparent forest/forestry information. A variety of digital technologies, including forest modeling, remote sensing, geographic information systems, global positioning systems, and visualization, have been applied in handling diverse information in China's forestry. Digital forestry is not just a theoretical concept in China. Our digital forestry experience in northeast China suggests that digital technology is both usable and useful in China's forestry development. Digital technology is playing an important interactive role in China's top-down forestry administration system. The analog-to-digital transition in technology is expected to lead to the success of forestry programs and forestry transitions in China.     

数字滤波法在点源和非点源污染负荷分割中的应用

以分辨流域点源和非点源污染负荷为研究目标,在傅立叶分析的基础上,提出了从污染负荷时间序列中分辨点源和非点源污染负荷的新方法——数字滤波法,探讨了数字滤波方程的参数与滤波次数的关系,并将该方法应用到东江流域COD_Mn负荷的分割上. 应用实例表明,分割的点源和非点源负荷系列曲线符合点源和非点源负荷的产生特点,使用者能够在污染负荷分割过程中通过滤波参数的选取比较方便地加入自己的经验. 一般取较大滤波参数时,只需要3次滤波就能得出较满意的结果.      

DEM AGGREGATION FOR WATERSHED MODELING1

ABSTRACT: The widely available USGS 7.5‐minute Digital Elevation Model (DEM) has a cell size of approximately 30 m × 30 m. This high resolution topographic information is impractical for many applications of distributed hydrologic and water quality models. In this study, cells were aggregated into coarse‐resolution areal units, termed grids, and a method to approximate flow direction for coarse‐resolution grids from 30 m DEM cells was developed. The method considers the flow path defined from the fine‐resolution DEM in determining a grid's flow direction and makes flow directions for grids closely follow the flow pattern suggested by the DEM. The aggregation method was applied to a DEM of Goodwater Creek, a nearly flat watershed that is located in central Missouri. The drainage networks derived for different levels of cell aggregations showed that grid aggregates of the Goodwater Creek watershed provided an adequate representation of the landscape topography.     

面源模式的通用算法探讨

提出了矩形面源扩散模拟计算的数值积分法和中心虚点源法,以及二者结合的综合法,并用算例进行了计算精度、计算速度和结果连续性的对比.结果表明:与传统的后置虚点源法及其改进算法——谷清经验法相比,该算法与理论真值的相对误差可从20%以上降低到3%以下,并且可以准确地反映风向和面源的形状,但在计算量上要增大十几倍到上百倍.对于任意不规则面源,提出了正方形分割算法,并对分割正方形的取舍采用简便的重心判断法,以准确方便地模拟其形状.综合运用笔者提出的适于机算的通用面源算法,对不同的计算任务权衡速度和精度采用合适的算法,可以处理各种气象条件下任意形状面源的扩散计算,并可取得理想的计算精度.