Operating condition influences on PCDD/Fs emissions from sinter pot tests with hot flue gas recycling

This study was designed to clarify the influence of operating conditions on the formation and emissions of polychlorinated-pdibenzodioxins and dibenzofurans (PCDD/Fs) from a sintering process with hot flue gas recycling. A pilot scale sinter pot with simulated flue gas recycling was developed, and four key operational parameters, including temperature, oxygen content of the simulated waste flue gas, the coke rate of the sintering mixture, and the quicklime quality, were selected for exploring PCDD/Fs formation. The results showed that the temperature of the recycled flue gas had a major affect on PCDD/Fs formation, and a high temperature could significantly increase their formation during sintering. A clear linear correlation between the temperature of recycling flue gas and PCDD/Fs emission (r = 0.93) was found. PCDD/Fs could be reduced to a certain extent by decreasing the level of oxygen in the recycled flue gas, while sintering quality was unchanged. The coke rate had no significant influence on the formation of PCDD/Fs, but the quality of quicklime used in the sintering mixture could affect not only the amount of PCDD/Fs emissions but also the sintering productivity. Compared with a benchmark sinter pot test, PCDD/Fs emissions markedly decreased with improvements to quicklime quality. However, the reduction in PCDD/Fs emissions realized by using high-quality quicklime was limited by the temperature of the inlet gas. The highest reduction achieved was 51% compared with conventional quicklime when the temperature of the inlet gas was 150°C.     

基于加热改性预处理废线路板的热力学作用过程研究

电子废物是固体废物环境管理的热点问题,而废线路板是电子废物的研究核心.废线路板是由铜箔、树脂和增强材料层压而成的复合材料,以破碎和分选过程相组合的机械物理方法是其资源化回收处理的主流技术,就如何提高破碎效果已成为机械物理技术发展面临的难题.研究提出了加热改性预处理的技术方法,用于废线路板结构物理改性和微观破坏,以提高破碎解离效率,其可实现金属与非金属的高度解离.基于改性处理技术,本文还分别从微观和宏观破坏力学角度,探究了加热改性处理机制.同时,结合ANSYS有限元热应力模型,对改性作用进行了理论分析.     

铅酸电池系统的铅流分析

探求铅的工业流动规律,寻求环境管理的理论依据.在构建铅酸电池生命周期铅流图基础上,建立了铅酸电池系统与外部环境之间的联系,获得了铅的工业流动基本规律.结果表明,提高铅的生态效率,有助于铅矿资源保护和环境改善.要做到这一点,需要保持较高的铅循环率、较低的铅排放率.提出了铅流状况的评价指标.分析了中国铅酸电池系统中铅的流动.通过与瑞典某铅酸电池系统中铅的流动进行对比,发现由于中国铅的循环率低下、铅的排放率偏高、铅酸电池年产量持续增长等,造成了中国铅酸电池系统中铅的生态效率十分低下.结合中国铅业实况,分析了铅的循环率低下和铅的排放率偏高的成因,提出了改善对策.     

“猪-沼-果”生态农业模式

“猪-沼-果”生态农业模式是一种循环经济模式,论文分析了这一模式的系统结构和运作机制,总结了科学实验的结果。“猪-沼-果”模式以沼气池为核心,聚集了一系列复杂的生化反应,优化传统种养模式的组织结构,使物质充分利用,能量有效转换,具有显著的经济、社会和生态环境效益。江西建设了103.87×104个农户家用沼气池和250个大、中型沼气工程,每年可以节省木材600×104余m 3,相当于75×104hm₂林地的活立木蓄积量;农作物施用沼肥,节省化肥农药,比传统模式提高肥效20%左右。“猪-沼-果”模式在流域综合治理、减少农村面源污染、发展绿色食品和控制血吸虫病等方面都有广泛的应用。     

矿山企业清洁生产审核实践及研究

结合清洁生产审核的政策和工作原理,将北京某铁矿公司的生产指标与国家采选行业清洁生产标准进行对比,确定审核目标,通过加权法从技术、环境、经济方面分析比较得出审核方案和审核结论. 对该企业实施清洁生产审核工作所取得的经验和存在问题进行总结和分析,不仅为矿山企业今后的清洁生产审核积累了丰富的实践经验,而且对我国当前正在开展的循环经济试点工作起到了很好的借鉴和推动作用.     

EGSB出水回流对EGSB—SBR工艺处理果汁废水的影响

采用EGSB—SBR工艺处理实际果汁废水(COD 2 608~6 500 mg/L,p H 5.0~7.0)。在EGSB反应器成功启动及驯化完成的情况下,连续运行49 d。实验结果表明:第25天起,控制EGSB回流比为3.00∶1,EGSB反应器可在无须添加Na HCO3的条件下稳定运行,从而降低了废水处理成本;第25天起,平均进水COD,BOD5,SS分别为5 968,2 130,1 020 mg/L,平均出水COD,BOD5,SS分别降至131,11,50 mg/L,平均COD,BOD5,SS去除率分别为98%,99%,95%;组合工艺对该实际果汁废水具有良好的处理效果。     

采油作业“三废”控制技术研究与应用

针对采油作业产生的废酸、固废、废水处理成本高、技术不成熟等问题,研发改性废酸降压增注、深部调剖技术;高比重污泥悬浮研磨后的固废处理技术;低耗水打塞、原井液+CaCl2压井、原井液处理再利用技术,减少了"三废"的产生,解决了"三废"环保处理费高等问题,消除了环保隐患,实现了清洁生产,环境效益显著。     

高炉瓦斯泥综合利用技术述评

瓦斯泥是高炉副产物,因其中富含锌,直接用于烧结会增加高炉锌负荷。在分析了瓦斯泥的矿物特征的基础上,综述了选矿法、化学浸出法、直接还原法等几种瓦斯泥有价成分的回收利用方法。选矿法根据碳、锌、铁的性质及赋存状态的差异分离各物质,具有工艺简单、成本低的优点,但分离不彻底、回收率低;化学浸出法使锌进入溶液而其他矿物不溶或微溶,分离效果较好,但处理量小,后续处理难度大;直接还原法是在高温下使瓦斯泥中的金属还原,锌蒸发后进入烟气,最终可得到含氧化锌较高的烟尘和含金属铁的脱锌瓦斯泥,该法适应性强、处理量大、分离效果好,是目前应用较为广泛的瓦斯泥处理方法,但其设备投资大。     

大力推进城市资源循环利用基地建设——以北京市朝阳区资源循环利用产业基地为例

资源循环利用基地的建设是破解城市固体废弃物“邻避效应”的创新道路,有助于新型城市功能区的建设,是推进资源循环利用的主要方式。以北京市朝阳区资源循环利用产业基地为例,研究其基地建设的优势基础及制约因素,通过探索基地建设模式,分析了基地建设的总体思路和重要举措,以期为其他地区资源循环利用基地建设提供经验。     

It's a dirty job but someone has to do it: The role of marine benthic macrofauna in organic matter turnover and nutrient recycling to the water column

Benthic macrofaunal populations through their feeding, bioturbation, burrow construction and sediment irrigation activities have profound influences on organic matter inputs to marine sediments (biodeposition) and on the vertical distribution of deposited organic matter within the sediment. These effects in turn influence the rates and pathways of organic matter mineralisation, and element cycles. Similarly, bioturbation, burrow construction and burrow irrigation are major determinants of sediment-water column fluxes of oxygen and nutrients.

In this review, I discuss the influences of the different benthic macrofaunal feeding (functional) groups on mineralisation processes and sediment-water column fluxes of particulate and dissolved nutrients. How these effects influence diagenic processes, the balance between aerobic and anaerobic processes, and the redox status of the surficial sediments. Finally, I discuss some of the limitations of the predominantly laboratory techniques which have been used to study “macrofaunal effects” and how this hinders the inclusion of the effects in quantitative sediment biogeochemical models.