萃取-催化氧化光度法测定生物体中H2O2含量研究

提出萃取-催化氧化光度法测定生物体中H2O2含量的新方法.用稀土催化H2O2产生羟基自由基以氧化二苯基碳酰二肼,生成红色二苯基碳酰腙,其最大吸收波长为563.0nm;当二苯基碳酰二肼浓度一定时,△A563与H2O2含量呈量效关系.在0～30μmol/L H2O2 含量范围内,该法能简单、快速、精确地测定生物样品中H2O2实际含量.     

Assessing land use impacts on flood processes in complex terrain by using GIS and modeling approach

A distributed hydrologic modeling and GIS approach is applied for the assessment of land use impact in the Steinsel sub-basin, Alzette, Grand-Duchy of Luxembourg. The assessment focuses on the runoff contributions from different land use classes and the potential impact of land use changes on runoff generation. The results show that the direct runoff from urban areas is dominant for a flood event compared with runoff from other land use areas in this catchment, and tends to increase for small floods and for the dry season floods, whereas the interflow from forested, pasture and agricultural field areas contributes to the recession flow. Significant variations in flood volume, peak discharge, time to the peak, etc., are found from the model simulation based on the three hypothetical land use change scenarios.     

Fractionation of Cu, Pb and Zn in certified reference soils SRM 2710 and SRM 2711 using the optimized BCR sequential extraction procedure

Sequential extraction of metals from solid media is a common analytical tool used in environmental and exploration geochemistry. A number of procedures exist, but without harmonization and standardization, meaningful comparisons are tenuous without baseline data. A newly developed, standardized sequential extraction procedure (optimized BCR) was applied to two contaminated certified reference soils from Montana, US (SRM 2710 and SRM 2711) for Cu, Pb and Zn. Four operationally defined fractions were isolated, acid extractable, reducible, oxidizable, and residual (by aqua regia). Fraction-specific concentrations, percentages and recoveries for Cu, Pb and Zn were used to explore differences between the optimized BCR procedure and three other sequential extraction schemes with published data for SRM 2710 and 2711 (i.e. Tessier scheme, Geological Survey of Canada scheme and the original BCR scheme). Results indicate significant differences between the four schemes, even for schemes that are closely associated (i.e. the original and optimized BCR schemes). Order-of-magnitude fraction-specific concentration differences were observed, especially for Pb in the reducible fraction. Differences between schemes are worrisome because trends varied between metals, between fractions and between reference soils. These data reinforce the need for increased adoption of standardized sequential extraction procedures and further examination of different solid media.     

石油亚砜萃取巯基醋酸的研究

对石油亚砜(PSO)萃取巯基醋酸的条件和影响进行了实验研究,确定了石油亚砜通过氢键和巯基醋酸形成的萃合物的组成.为从废水中回收巯基醋酸以及石油硫醚的综合利用提供了依据.     

超声波－蒸汽蒸馏萃取技术富集沉积物样品中的氯代农药和多氯联苯

为方便快速分离沉积物中含氯农药和多氯联苯，将超声波技术和蒸汽蒸馏萃取技术相结合，萃取沉积物中的微量含氯农药和多氯联苯，所得萃取物不需进一步的净化和浓缩，可直接用于色谱分析．实验表明，在进行蒸汽蒸馏萃取之前，使用辅助的超声波技术可将大部分待测物的回收率提高２０％－３０％，较好地解决了由于沉积物的吸附作用而导致的蒸汽蒸馏萃取回收率偏低的缺陷．该法使沉积物样品中的氯代农药和多氯联苯的蒸汽蒸馏萃取富集成为可能．     

尖点突变模型在研究洪水引起环境突变中的应用

以1998年霍林河特大洪水为例，在进行洪水对环境影响作用分析的基础上，将洪水发生的危险系数、地面高程、地形坡度、降雨影响程度、土地盐碱率和草地开垦率6个控制变量划分为两个主分量。由于洪水引起的环境突变可以归纳为一种耦合突变，我们采用尖点突变模型进行求解，得出各主分量的数学表达式和水环境突变区域边界，绘制了该流域环境突变分区图，论证了应用尖点突变模型研究环境突变的合理性。     

正己烷萃取—此外分光光度法测定矿井水中微量油

在进行矿井水中油类分析时，用正己烷作为萃取剂，以工作曲线代替标准曲线，从而使油平均回收率增加到96％以上。并在正己烷用量、水样预处理等测试参数选择上做了条件试验。     

Studies on the use of power ultrasound in solid–liquid myrobalan extraction process

Focus on eco-friendly processing techniques makes vegetable tanning a viable option in leather processing and establishes the subsequent need for the more efficient methods of extraction in tannin manufacture. Application of ultrasound has been tried in the extraction of tannins from myrobalan nuts in order to improve the extraction efficiency, to perform the extraction under milder process conditions and to reduce the process time. The influence of process parameters such as ultrasonic output power, time and temperature has been studied. Scale-up trials and the use of ultrasound in pulse mode have also been attempted. The results show that a three- to fivefold improvement is possible with ultrasonic output from 20 to 100 W. Extraction efficiency has been calculated from the maximum extractable materials from myrobalan nuts. Extraction efficiency is found to be 90% for ultrasound, 100 W without external heating as compared to 77% for control process at 70 °C for 4 h. Therefore, ultrasound could be employed even dispensing with provision for temperature controls. The use of ultrasound in pulse mode offered 70% extraction efficiency of continuous mode. Scale-up trials indicate that there exists an optimum ultrasonic output power depending on the amount of nuts used, to achieve better extraction efficiency. The effectiveness of ultrasonically extracted tannin solution has also been tested in the tanning process for its applicability. The degree of tanning efficacy has been assessed by shrinkage temperature measurement. The results indicate that ultrasonically extracted tannin solution is suitable for tanning process. Therefore, application of ultrasound in tannin extract manufacture is a viable option with added advantages.     

硫代氨基甲酸盐提取工业废水中的锌离子

本文主要探索了金属离子络合剂———硫代氨基甲酸盐的合成制备 ,并通过其对锌离子的络合作用 ,以达到脱除金属离子的目的 .实验表明 ,由吗啡啉合成制得的硫代氨基甲酸盐 锌离子络合剂在酸性废水中 ,对锌离子具有良好的络合能力 .通过对废水中金属锌离子的脱除工艺条件的相应探索 ,发现在体系的pH =2～ 6范围内 ,硫代氨基甲酸盐对锌离子的脱除率均达99 %以上     

超临界水处理有机废物研究新进展

超临界水处理废物以通过添加氧化剂的超临界水氧化和不加氧化剂的超临界水萃取两种方式实现，超临界水氧化应用较多，与其它废物处理技术相比有显著优点。本文总结了超临界水氧化流程和反应机理，评述了添加剂，温度，压力及停留时间，催化剂等对超临界水氧化反应的影响，同时介绍了超临界水氧化和超临界水萃取的最新应用研究状况及尚需解决问题。