Assessing field vulnerability to phosphorus loss in Beijing agricultural area using Revised Field Phosphorus Ranking Scheme

Guanting Reservoir,one of the drinking water supply sources of Beijing,suffers from water eutrophication.It is mainly supplied by Guishui River.Thus,to investigate the reasons of phosphorus(P)loss and improve the P management strategies in Guishui River watershed are important for the safety of drinking water in this region.In this study,a Revised Field P Ranking Scheme(PRS)was developed to reflect the field vulnerability of P loss at the field scale based on the Field PRS.In this new scheme,six factors are included, and each one was assigned a relative weight and a determination method.The affecting factors were classified into transport factors and source factors,and,the standards of environmental quality on surface water and soil erosion classification and degradation of the China were used in this scheme.By the new scheme,thirty-four fields in the Guishui River were categorized as"low","medium"or"high"potential for P loss into the runoff.The results showed that the P loss risks of orchard and vegetable fields were higher than that of corn and soybean fields.The source factors were the main factors to affect P loss from the study area.In the study area,controlling P input and improving P usage efficiency are critical to decrease P loss.Based on the results,it was suggested that more attention should be paid on the fields of vegetable and orchard since they have extremely high usage rate of P and high soil test of E Compared with P surplus by field measurements,the Revised Field PRS was more suitable for reflecting the characteristics of fields,and had higher potential capacity to identify critical source areas of P loss than PRS.     

河流水污染损失补偿模型研究

我国水污染问题的突出表现之一是省际间、地区间水污染纠纷接连不断, 严重影响经济发展和社会稳定。在流域不同主体之间建立水污染补偿机制,可以把水污染造成的环境外部损失内部化,从而促使污染者在治污成本和经济补偿之间进行权衡,促进水污染治理措施的有效执行和水污染纠纷的解决。在水污染经济损失评估的基础上,以河流为研究对象,采用水环境数学模型的方法描述了污染物排放的空间影响关系,进而把超量排放的环境影响与经济影响联系起来,对模型的基本特征、处理方法和应用范围进行了讨论,并且以太湖流域范围内的京杭运河为例进行实证研究,得到了河流水污染损失补偿的数学模型。     

Effect of platinum on the photocatalytic degradation of chlorinated organic compound

TiO2 nanoparticles, doped with di erent Pt contents, were prepared by a modified photodeposition method using Degussa P-25 TiO2, H2PtCl6 6H2O and methanol as the solvents. The physicochemical properties of Pt/TiO2 were investigated by the nitrogen adsorption and desorption isotherm measurement technique, X-ray di raction analysis and photoluminescence spectra, respectively. Reaction rates from photocatalytic removal of dichloromethane over Degussa P-25 TiO2 and Pt/TiO2 were evaluated. The average diameter and BET surface area of the TiO2 catalyst particles were 300 nm and 50 m2/g, respectively. The degradation e ciency was 99.0%, 82.7%, 55.2%, and 57.9% with TiO2 at inlet concentrations of 50, 100, 200, and 300 ppm, respectively. And the degradation e ciency was 99.3%, 79.7%, 76.5%, and 73.4% with a 0.005 wt.% Pt/TiO2 at inlet concentrations of 50, 100, 200, and 300 ppm, respectively. In addition, we found that the photoluminescence emission peak intensities decreased with increases in the doping amount of Pt, which indicates that the irradiative recombination was weakened. Furthermore, the results showed that the UV/0.005 wt.% Pt/TiO2 process was capable of e ciently decomposing gaseous DCM in air.     

Vibrational energy loss analysis in battery tab ultrasonic welding

In ultrasonic metal welding processes, high-frequency ultrasonic energy is used to generate friction and heat at the interface between weld parts to produce solid-state bonds. It has been observed that sufficient energy is required to produce proper bonding, while excessive energy can cause such quality issues as weld fracture and perforation. Therefore, it is important to have a product/process design in ultrasonic welding to ensure efficient energy conversion from ultrasonics to welding energy, minimizing energy loss in the process. In this work, vibrational energy loss associated with the longitudinal and flexural vibrations of the Cu coupon during ultrasonic welding is studied by applying one-dimensional continuous vibration models. To facilitate our modeling, experimental results from the free response of Cu coupon were obtained to determine the damping characteristics of the Cu coupon in the welding process. Our analysis shows that substantial energy loss can occur during welding due to the flexural vibration of the Cu coupon, especially when the overhang (the upper part of the Cu coupon extended from the anvil) of the Cu coupon resonates at or close to the welding frequency (about 20 kHz), degrading the weld quality of battery tabs. This study contributes to understanding the fundamental dynamics of the Cu coupon during ultrasonic welding and its impact on weld quality.     

经济结构调整的污染减排效应：以COD减排为例

经济结构调整是减少污染物排放的重要手段.为定量分析经济结构调整对污染减排的影响,将全国分为东部、东北、中部和西部4个子区域、工业分为39个行业,以化学需氧量(COD)为例,通过构建模型分析区域结构和行业结构调整对总量减排和排放强度的影响.结果表明,2000～2010年:1中国COD排放量由1445×104t降至1 238×104t,11 a间共排放14 950×104t.其中东部地区排放量最多,占总量的比重约为35.6%.2在工业COD排放量中,造纸及纸制品业排放量最大,占工业COD排放量的35.8%.3四大地区经济结构变化减少COD排放420×104t,使COD排放强度降低1.29%.4工业内部行业结构的变化减少COD排放533×104t,使COD排放强度降低3.1%.研究结果对指导中国经济结构调整、实现节能减排目标具有一定的参考价值.     

基于“径流-地类”参数的非点源氮磷负荷估算方法

东江作为广东省重要的饮用水源,其上游农业集水区非点源氮磷流失量备受关注.因此,本文以东江上游上莞河小流域为研究区,利用2011年的集水区水质监测数据,在平均浓度法及输出系数法的基础上,构建基于"径流-地类"参数的非点源氮磷负荷计算式,其径流、地类参数分别通过校正后的SCS模型和土地利用现状图获取,并分别对上莞河流域及流域各地类的非点源氮磷流失量进行估算.研究结果表明,汛期上莞河流域氮磷流失量主要来源于非点源污染,其非点源氮、磷流失量分别占氮、磷流失总量的97.32%、98.05%.坡度对流域非点源氮磷流失影响较小,地类是影响非点源氮磷输出的重要因素.构建的计算式能较好地估算非点源氮、磷负荷量,在次暴雨尺度非点源氮、磷输出量模拟精度分别为84.78%、81.06%.2011年度上莞河流域非点源氮、磷输出量分别为48923.4、7189.3 kg,耕地、居民地分别是非点源氮、磷输出的关键源区,其非点源氮、磷输出量分别占流域非点源氮、磷输出总量的84.20%、58.54%.     

需求视角的中国能源消费氮氧化物排放研究

基于经济投入产出生命周期评价(EIO-LCA)模型构建了中国1990—2010年能源消费氮氧化物完全排放矩阵,从需求的角度分析了氮氧化物排放在部门和不同需求间的分布结构,并通过情景模拟深入探讨了最终需求结构变化对氮氧化物排放的综合影响和拉动效应,以期探索中国氮氧化物减排的多元化途径.研究结果显示,1990—2010年中国氮氧化物排放总量从878万t上升到2398万t,历年来由工业部门拉动产生的氮氧化物占总量的比重高达70%左右;由最终消费拉动的氮氧化物排放比重逐年下降,资本形成和出口拉动的氮氧化物排放比重逐年上升.氮氧化物排放强度则从47.0 kg·万元-1降至6.0 kg·万元-1,其中,能源和交通部门的排放强度最高.通过情景模拟可以看出,提高最终消费比重,扩大内需有利于氮氧化物总量减排,尤其是对工业部门的减排效果显著.实现氮氧化物总量减排目标,要求在技术进步之外,积极寻求多元减排措施,以强化减排效果,突出能源和交通等重点部门的氮氧化物防治体系建设,并通过扩大内需优化最终需求结构以促进工业部门氮氧化物减排.     

基于标准化降水蒸散指数的陕西省近50 a干旱特征分析

基于陕西省18 个气象站点1961-2010 年实测气象资料,利用标准化降水蒸散指数(SPEI),通过计算各站历年逐月的SPEI 指数值,统计近50 a 各站点出现的干旱过程,分析了陕西省历年、历年各季及月尺度上的干旱发生频率、覆盖面积和干旱发生强度,揭示了陕西省干旱发生的时空和强度演变特征。研究结果表明,近50 a 来陕西省干旱发生频率呈明显的增长趋势,尤其是1990 年以来的近20 a;陕西省在年、春、夏、秋、冬及月尺度上均有干旱发生。其中,秋季干旱最为严重,春季次之。在年代际变化方面,全省以20 世纪90 年代干旱最为严重,2000 年以来的干旱次之;干旱出现既有全省性的大范围干旱,也有区域性的局部干旱,分布极不均匀,总体分布特征是北多南少;干旱发生强度分布呈现出关中最强、陕南次之、陕北最弱的特点。     

紫色丘陵区不同弃土弃渣下垫面入渗特征及影响因素

采用环刀法研究了紫色丘陵区不同碎石含量弃土弃渣下垫面的入渗特征及影响因素.结果表明,不同弃土弃渣下垫面入渗性能随碎石含量的增加而差异显著,其中,碎石含量为40%的弃土弃渣下垫面初始入渗率、稳定入渗率及平均入渗率分别是土质弃渣下垫面的1.30、1.13和1.54倍.不同下垫面初始入渗率和稳定入渗率与弃渣初始含水率、容重呈显著负相关,与下垫面总孔隙度、非毛管孔隙度呈显著正相关.其中,初始入渗率与初始含水率相关系数在-0.689~-0.912之间,稳定入渗率与容重相关系数为-0.745~-0.999,且稳定入渗率随非毛管孔隙度增加而显著提高.Horton模型对不同弃土弃渣下垫面入渗率与时间拟合的可决系数在0.899以上,且Horton模型计算入渗率与实测入渗率的相对误差在0.07%~6.60%之间,是紫色丘陵区分析不同弃土弃渣下垫面入渗过程的适宜性模型.研究结果可为紫色丘陵区弃土弃渣水土流失量预测和评价提供技术参数.     

公路项目环评中低时速单车噪声源强研究

由于缺乏低时速单车噪声源强估算模式,低等级公路项目噪声预测结果常与实际监测结果存在较大偏差。文中通过实测各车型车辆在低时速条件下时速和单车辐射声级(Lmax)数据,运用统计软件分析两者间的关系,并通过实测过往车辆数据进行验证。结果显示沿用《公路建设项目环境影响评价规范》(以下简称《06规范》)中的公式计算低车速源强可能会造成结果偏低,建议采用下列式子估算低车速单车噪声源强:小型车L=21.5 lgV+34.96(15≤V≤63),中型车L=10.4 lgV+59.29(15≤V≤53),大型车15≤V≤48(15≤V≤48)。