Evaluation of an acid ammonium oxalate extraction to determine fluoride resident concentrations in soils

Fluoride depositions near aluminum smelters and other fluoride-emitting plants can lead to fluoride accumulation in soils, which constitutes a risk for ground water contamination. This study was conducted to investigate the capacity of a 0.2 M acid ammonium oxalate solution to selectively and quantitatively extract fluoride accumulated in soils. The recovery of fluoride added to three soils was evaluated following 7- to 28-d incubations. Oxalate extraction was also compared with a total fluoride extraction method, using oxalate-extractable fluoride (Fox) and total fluoride (Ftot) accumulation profiles derived from column percolation experiments. To determine low-level fluoride concentrations without interference from high Al and Fe concentrations, an adapted ion chromatography method was used. Following soil incubations, oxalate extracted 42 to 86% of added fluoride. Recovery varied between soils and, in one soil, increased with added fluoride concentration. Recovery was unaffected by incubation time. Maximum recovery was obtained in a soil high in amorphous Fe and Al, low in clay, and free of carbonate. Lower recoveries were obtained in soils with higher clay or carbonate contents. Only 4 to 8% of Ftot was extracted in untreated samples using Fox, which suggests a high selectivity of this method for added fluoride. In percolation experiments, the use of Fox reduced considerably the background noise associated with Ftot for the evaluation of fluoride accumulation profiles. Because of its high selectivity and despite incomplete fluoride recovery, the use of Fox to determine fluoride resident concentrations in soils may improve environmental monitoring of fluoride accumulation and movement in contaminated soils.     

Spatial pattern and persistence of historical fire boundaries in southern interior British Columbia

Recent ecosystem and fire management research aims to quantify, model and understand historical fire disturbances focusing on their frequency, size and distribution. Less attention, however, has been paid to fire boundaries and their location on the landscape. Our study presents a spatial method to quantify the location, pattern and persistence of historical fire boundaries using tree ring fire scar data in the lower Stein watershed (British Columbia). Data from Pinus ponderosa and Pseudotsuga menziesii collected in 35 one-hectare plots over a 412-hectare study area were analyzed for the period between 1879 and 1947 using local spatial statistics and boundary detection techniques. Results of the analysis using local spatial statistic Moran’s I showed significant clustering of boundaries near topographic breaks. To determine and test whether fire boundaries between plots were persistent, we used boundary detection methods and developed a spatially restricted randomization test. The results revealed that out of 86 possible boundary links, 8 were significantly persistent (P < 0.025) while another 8 were significantly rare (P < 0.025). These spatial methods can help determine the historical spatial configuration of persistent boundaries and can be used to maintain natural forest dynamics.

Energy gains predict the distribution of plains bison across populations and ecosystems

Developing tools that help predict animal distribution in the face of environmental change is central to understanding ecosystem function, but it remains a significant ecological challenge. We tested whether a single foraging currency could explain bison (Bison bison) distribution in dissimilar environments: a largely forested environment in Prince Albert National Park (Saskatchewan, Canada) and a prairie environment in Grasslands National Park (Saskatchewan, Canada). We blended extensive behavioral observations, relocations of radio-collared bison, vegetation surveys, and laboratory analyses to spatially link bison distribution in the two parks and expected gains for different nutritional currencies. In Prince Albert National Park, bison were more closely associated with the distribution of plants that maximized their instantaneous energy intake rate (IDE) than their daily intake of digestible energy. This result reflected both bison's intensity of use of individual meadows and their selection of foraging sites within meadows. On this basis, we tested whether IDE could explain the spatial dynamics of bison reintroduced to Grasslands National Park. As predicted, bison distribution in this park best matched spatial patterns of plants offering rapid IDE rather than rapid sodium intake, phosphorus intake, or daily intake of digestible energy. Because the two study areas have very different plant communities, a phenomenological model of resource selection developed in one area could not be used to predict animal distribution in the other. We were able, however, to successfully infer the distribution of bison from their foraging objective. This consistency in foraging currency across ecosystems and populations provides a strong basis for forecasting animal distributions in novel and dynamic environments.     

The effects of ozone-exposed sugar maple seedlings on the biological performance and the feeding preference of the forest tent caterpillar (Malacosoma disstria Hbn.)

The effects of exposure of sugar maple (Acer saccharum Marsh.) to ozone on the entire larval stage of a native insect have not been previously investigated. This study reports the effects of sugar maple seedlings exposed to different ozone concentrations on the relative performance and the feeding preference of the forest tent caterpillar (Malacosoma disstria Hbn.). Three-year-old seedlings were set in nine open-top field chambers in the spring of 1992 and 1993. Three ozone concentrations were generated: charcoal-filtered ambient air (0x), ambient air (1x) and three times ambient air (3x). In 1992, female and male larval development time did not differ among ozone treatments. In 1993, female larvae reared on 3x developed faster than those on 0x and 1x, while male larvae were not affected. Ozone treatments did not influence pupal weights except for males in 1993 where pupae reared on 0x were heavier than 1x but did not differ from 3x. Larval and pupal survival rates were not affected by ozone in either year. Finally, 4th and 5th instar larvae showed a significant feeding preference for 3x foliage in 1993 but not in 1992. The response of the forest tent caterpillar to ozone exposed seedlings varied between years and could be more sensitive to annual climatic variations than ozone.     

Connectivity for conservation: a framework to classify network measures

Graph theory, network theory, and circuit theory are increasingly being used to quantify multiple aspects of habitat connectivity and protected areas. There has been an explosive proliferation of network (connectivity) measures, resulting in over 60 measures for ecologists to now choose from. Conceptual clarification on the ecological meaning of these network measures and their interrelationships is overdue. We present a framework that categorizes network measures based on the connectivity property that they quantify (i.e., route-specific flux, route redundancy, route vulnerability, and connected habitat area) and the structural level of the habitat network to which they apply. The framework reveals a lack of network measures in the categories of "route-specific flux among neighboring habitat patches" and "route redundancy at the level of network components." We propose that network motif and path redundancy measures can be developed to fill the gaps in these categories. The value of this framework lies in its ability to inform the selection and application of network measures. Ultimately, it will allow a better comparison among graph, network, and circuit analyses, which will improve the design and management of connected landscapes.     

On the process of negotiating a joint venture

Using a joint venture negotiation as an example, the negotiation process is examined from a very practical point of view. The background, the objectives and the planning and strategy for a negotiation are examined and suggestions are offered on the 'dos and don'ts' to follow during the negotiation process.     

Geochemistry of Iron and Sulfur in the Zone of Microbial Sulfate Reduction in Mine Tailings

The cycling of iron and sulfur in mine tailings depends on various chemical and microbial reactions. The present study was undertaken in order to assess the role played by populations of sulfate-reducing bacteria (SRB) on the fate of Fe and SO₄ ^2- in Cu–Zn and Au tailings. Samples were taken along a 50-cm deep profile at all sites and analyzed for SRB populations, solid-phase mineralogy and porewater geochemistry. Results indicated that the Cu–Zn tailings were highly oxidized near the surface, as shown by the very low pH, high redox potential, large concentrations of soluble Cu, Zn and sulfate in the porewaters, and the depletion of pyrite. On the other hand, Au tailings were more pH neutral, slightly anoxic, and showed low concentrations of Fe and SO₄ ^2- in the porewaters and very little pyrite oxidation. SRB populations in the Cu–Zn tailings increased with depth, just below the oxic/anoxic interface and were linked to a decline of sulfate and DOC concentrations around the same depths. However, large concentrations of dissolved Fe were also observed around the same depth intervals. Our results suggest that SRB could be involved in sulfate reduction in the Cu–Zn tailings, because the solubility of sulfate was not controlled by the precipitation of sulfate-rich minerals. However, the presence of soluble Fe in the reduced portion of the tailings was also indicative of the presence of iron reducing bacteria (IRB). These bacteria were not enumerated in the present study, but their co-occurrence with SRB has been reported in the past in similar mining environments. The decline of sulfate and the release of soluble iron into the porewaters were also paralleled by a pH increase and the generation of alkalinity. In the Au tailings, SRB populations were generally constant throughout the depth profile and could not be ascribed to sulfate reduction in the porewaters. The solubilities of sulfate and iron in these tailings were partially controlled by jarosite and Fe-oxide minerals. It is then clear that SRB populations could be recovered from various mining sites, but their activity cannot be ascertained based on microbial enumeration and geochemical data.     

Incorporating consumer–resource spatial interactions in reserve design

The persistence of species in reserves depends in large part on the persistence of functional ecological interactions. Despite their importance, however, ecological interactions have not yet been explicitly incorporated into conservation prioritization methods. We develop here a general method for incorporating consumer–resource interactions into spatial reserve design. This method protects spatial consumer–resource interactions by protecting areas that maintain the connectivity between the distribution of consumers and resources. We illustrate our method with a conservation planning case study of a mammalian predator, American marten (Martes americana), and its two primary prey species, Red-backed vole (Clethrionomys rutilus) and Deer mouse (Peromyscus maniculatus). The conservation goal was to identify a reserve for marten that comprised 12% of a forest management unit in the boreal forest in Québec, Canada. We compared reserves developed using analysis variants that utilized different levels of information about predator and prey habitat distributions, species-specific connectivity requirements, and interaction connectivity requirements. The inclusion of consumer–resource interactions in reserve-selection resulted in spatially aggregated reserves that maintained local habitat quality for the species. This spatial aggregation was not induced by applying a qualitative penalty for the boundary length of the reserve, but rather was a direct consequence of modelling the spatial needs of the interacting consumer and resources. Our method for maintaining connectivity between consumers and their resources within reserves can be applied even under the most extreme cases of either complete spatial overlap or complete spatial segregation of consumer–resource distributions. The method has been made available via public software.     

From social ‘acceptance’ to social ‘acceptability’ of wind energy projects: towards a territorial perspective

Social acceptance is central in many debates surrounding energy projects. Wind energy, in particular, has been described as a ‘learning laboratory’ in terms of social acceptance of energy projects. It has given way to a socio-technical paradox: the social dimension has become a factor of equal importance to technology in the wind farms implementation. Based on a literature review concerned with the social acceptance of wind energy, the paper seeks to demonstrate both the richness and the limits of the key concepts that inform the ongoing work of scholars. By doing so, we intend to emphasise the complex processes underneath in order to then elaborate a conceptual definition of social acceptability. Various modulations and limits that characterise current thinking are thus underlined. We then propose a grid analysis relying on a territorial perspective. It is structured around three levels that connect micro-social, meso-political and macro-economic processes.