基于 GJB 150.26 的军用装备流体污染试验实施方法

从适用性、参数选取、试验程序等角度深度梳理GJB 150.26试验标准,并研究流体污染试验程序的实施方法。通过对流体污染试验的研究背景和应用需求、相关标准应用现状和试验适用范围进行说明介绍,围绕基于GJB 150.26的流体污染试验参数选取原则、试验程序制定方法,探究符合标准架构的试验实施流程体系。按照所归纳研究整理的试验实施流程体系,结合工程实例对某型机载产品基于GJB 150.26的试验标准,针对其实际使用情况和相关技术协议文件制定了流体污染试验程序,进行了试验实施验证。流体污染试验实施目前在我国环境适应性工程领域缺乏理论基础指导,具备较大的开拓空间,通过对其实施方法和程序的研究能够有效地提升军用装备开展特种环境试验的技术能力。     

储罐用钢在3.5%NaCl溶液中的腐蚀行为研究

目的对比研究三种油气储罐在水压试验时的腐蚀行为特征。方法选用9Ni钢、Q235碳钢、304L不锈钢储罐用材料以及3.5%NaCl模拟海水溶液,采用开路电位、电化学阻抗谱、动电位极化曲线测试方法研究三种储罐用钢在模拟海水中的电化学腐蚀特征,同时结合浸泡质量损失试验和微观腐蚀形貌进行分析。结果 9Ni钢、Q235碳钢、304L不锈钢稳定后的开路电位(vs.SCE)分别为-0.55、-0.64、-0.10m V,Rt值分别为2 792、1 765、125 100,平均腐蚀深度分别为0.070 6、0.160 3、0.002 5 mm/a。微观腐蚀形貌显示,9Ni钢和Q235碳钢表面发生明显的腐蚀,而304L不锈钢只发生轻微的点蚀。结论在3.5%NaCl模拟海水溶液中,304L不锈钢最耐腐蚀,Q235碳钢最易腐蚀,9Ni钢居于两者之间。因此在9Ni钢和Q235碳钢储罐海水试压过程中需要采取临时保护。     

喷丸强化技术在某型作动筒延寿修理中的应用

目的将某型作动筒的寿命由6000±150起落延长至12 000±150起落。方法采用喷丸强化技术对作动筒的主要承力零件进行喷丸强化处理,提高零件的抗疲劳和抗应力腐蚀性能。通过疲劳寿命试验验证对比喷丸强化处理前后典型零件和作动筒的寿命指标是否达到了预期目标。结果喷丸强化处理前的3件前耳环螺栓试验循环次数均未超过1.8×10~6即断裂,喷丸强化后达到3.6×10~6时仍未断裂。喷丸强化处理后的4件主耳环螺栓与喷丸强化处理前对比,断裂时的试验循环次数均有不同程度的提高,均值寿命比值大于2.36。喷丸强化处理前后的主前作动筒疲劳寿命试验达到预期的循环次数时,均没有出现断裂或者损坏。结论喷丸强化处理能有明显提高作动筒的抗疲劳和抗应力腐蚀性,强化处理后的零件疲劳寿命能够超过处理前的2倍,可以采用喷丸强化技术延长作动筒的使用寿命。     

印制电路板海洋环境试验与实验室环境试验相关性研究

目的研究机载电子设备印制电路板西沙海洋大气环境与实验室环境试验的相关性。方法在西沙海域环境下开展两种印制电路板的棚下暴露试验,暴晒试验时间为3年,同时在实验室开展盐雾试验,分别通过测试绝缘电阻、品质因数研究两种试验环境的相关性。结果将以绝缘电阻、品质因数为基准相关性评价结果进行平均,得出印制电路板实验室加速试验和自然暴露试验存在着强相关。两种样品的加速系数分别是3.5,5.15。结论建立了印制电路板在西沙海洋环境试验和实验室盐雾环境试验的相关性,可为后续西沙环境试验的加速处理提供依据。     

机载战术导弹挂飞环境地面振动试验方案研究

研究总结了某型机载战术导弹服役过程中所经受的振动激励主要来源,同时研究分析不同激励方式对战术导弹吊耳载荷响应效果的影响,确定该型机载战术导弹振动载荷加载方案。采用理论计算与有限元建模计算分析的方法,分析比较不同激励方式对导弹吊耳载荷响应效果的影响。总结确定了该型机载战术导弹振动载荷的主要来源,通过理论算例和有限元建模计算的方法分别计算了不同激励方式下导弹吊耳的载荷响应,并最终确定了振动载荷加载激励方式。     

垃圾填埋场室内模拟试验注水量确定方法及其应用

针对填埋场室内模拟试验往往忽略降雨径流和初损的问题,提出运用SCS模型确定室内模拟试验日注水量的方法,并将计算结果应用于成都长安填埋场室内模拟试验中.结果表明,采用SCS模型计算所得的日入渗量进行注水的模拟柱渗滤液产量和水质变化能够更准确的模拟填埋场实际情况.     

海河下游水体中DO与NH_3-N、COD_(Mn)相关关系探讨

本文应用近年来海河下游监测数据对ＤＯ与ＮＨ３Ｎ和ＣＯＤＭｎ进行一元线性回归，得到两回归方程：ＮＨ３Ｎ＝－１２８ＤＯ＋１０５４；ＣＯＤＭｎ＝－１１３ＤＯ＋１６９２。并经相关系数和回归系数显著性检验，表明在９９９％的置信水平下ＤＯ与ＮＨ３Ｎ和ＣＯＤＭｎ线性相关均极其显著     

用EXCEL进行精密度-偏性分析质控数据处理

利用EXCEL强大的数据处理功能，可以方便地对精密度—偏性分析质控数据进行处理，具有较高的推广价值。     

Investigation of the Influence of Seagrass on Fisheries Catch Level Using Isotonic Regression

The relationship between seagrass area and the commercial catch of some economically important South Australian fish species is not known in any quantitative sense. However, there is evidence in the literature to suggest that seagrass decline will detrimentally impact on species abundance and composition, and consequently that the presence or absence of seagrass will compromise the commercial and recreational fishery. In this paper we describe the construction of models based on order restricted (isotonic) regression and discuss the role of seagrass area, in terms of its influence on the level of commercial catch through modifying the effect of fishing 'effort'.     

Large-scale mercury variations in Lake Vänern (Sweden) 1974-98

Lake V?nern, the largest lake in Sweden, has been seriously contaminated with mercury during the 20th century. In the 1970's and 80's the direct load, mainly from a chlor-alkali industry in the area, of mercury was drastically reduced as a response to new legislation, from three to five tons down to between five and ten kg yr(-1). Large amounts of the disposed pollutant have accumulated in the sediments. The question posed in this work is now, is the effect of the drastic load reduction after more than two decades visible in the sediments? The question is relevant as large areas still are blacklisted for fishing, but also as a follow-up of a major remedy action. The lake also serves as a freshwater reservoir for even Sweden's second largest city. This work synthesises and compares data of mercury in the sediments from three major field programs, in 1974, 1984 and 1998. The interest is focused on both spatial heterogeneity and temporal trends. In 1974, the surface concentrations are significantly higher than in subsequent surveys. Significant differences are also found between 1984 and 1998. Significant spatial differences within the lake are found for respective year. The most contaminated area is located in the north, close to the major point source (a former chlor-alkali industry). This is also the area with the largest improvement, as a direct response to the reduction in load. Further from the outlet, the recovery is more affected by burial and transport processes out into the deeper basins.