广西不同石漠化等级下SPAC水势梯度及其环境效应

以野外观测为基础,对广西不同石漠化等级(无石漠化、轻度石漠化、中度石漠化和重度石漠化)下土壤-植被-大气连续体(Soil-Plant-Atmosphere Continuum,简称SPAC)系统中的水势日变化、气象因子日变化过程进行了研究。结果表明:随着石漠化程度的增加,大气水势降低,大气水势对不同石漠化程度的反应敏感。岩溶区石漠化等级下植物和土壤水势较低,不同石漠化条件下的植物叶水势在-7.79±0.43~-2.68±0.11 Mpa之间,土壤水势在-4.00±0~-0.08±0.04 Mpa之间,重度石漠化等级下植物处于萎蔫状态。植物在正午受到的水分亏缺程度为:重度石漠化中度石漠化无石漠化轻度石漠化。无石漠化下植物叶片水势与大气温度呈正相关关系,与大气相对湿度呈负相关关系,轻度石漠化、中度石漠化和重度石漠化下植物叶片水势与大气温度呈负相关关系,与大气相对湿度呈正相关关系。水分在SPAC系统中运移,其能量消耗主要集中在叶片-大气的过程。叶-气水势差差值大小为:中度石漠化重度石漠化轻度石漠化无石漠化。随着石漠化程度的增加,SPAC水势梯度提高,各介质层水势差的增大,提高了水分循环和能量交换的强度。     

Biostability in distribution systems in one city in southern China：Characteristics, modeling and control strategy

This study investigated the bacterial regrowth in drinking water distribution systems receiving finished water from an advanced drinking water treatment plant in one city in southem China. Thirteen nodes in two water supply zones with different aged pipelines were selected to monitor water temperature, dissolved oxygen （DO）, chloramine residual, assimilable organic carbon （AOC）, and heterotrophic plate counts （HPC）. Regression and principal component analyses indicated that HPC had a strong correlation with chloramine residual. Based on Chick-Watson＇s Law and the Monod equation, biostability curves under different conditions were developed to achieve the goal of HPC 100 CFU/mL. The biostability curves could interpret the scenario under various AOC concentrations and predict the required chloramine residual concentration under the condition of high AOC level. The simulation was also carded out to predict the scenario with a stricter HPC goal （≤50 CFU/mL） and determine the required chloramine residual. The biological regrowth control strategy was assessed using biostability curve analysis. The results indicated that maintaining high chloramine residual concentration was the most practical way to achieve the goal of HPC ≤ 100 CFU/mL. Biostability curves could be a very useful tool for biostability control in distribution systems. This work could provide some new insights towards biostability control in real distribution systems.     

Removal of polycyclic aromatic hydrocarbons from aqueous solution by raw and modified plant residue materials as biosorbents

Removal of polycyclic aromatic hydrocarbons （PAHs）, e.g., naphthalene, acenaphthene, phenanthrene and pyrene, from aqueous solution by raw and modified plant residues was investigated to develop low cost biosorbents for organic pollutant abatement. Bamboo wood, pine wood, pine needles and pine bark were selected as plant residues, and acid hydrolysis was used as an easily modification method. The raw and modified biosorbents were characterized by elemental analysis, Fourier transform infrared spectroscopy and scanning electron microscopy. The sorption isotherms of PAHs to raw biosorbents were apparently linear, and were dominated by a partitioning process. In comparison, the isotherms of the hydrolyzed biosorbents displayed nonlinearity, which was controlled by partitioning and the specific interaction mechanism. The sorpfion kinetic curves of PAHs to the raw and modified plant residues fit well with the pseudo second-order kinetics model. The sorption rates were faster for the raw biosorbents than the corresponding hydrolyzed biosorbents, which was attributed to the latter having more condensed domains （i.e., exposed aromatic core）. By the consumption of the amorphous cellulose component under acid hydrolysis, the sorption capability of the hydrolyzed biosorbents was notably enhanced, i.e., 6-18 fold for phenanthrene, 6-8 fold for naphthalene and pyrene and 5-8 fold for acenaphthene. The sorpfion coefficients （Kd） were negatively correlated with the polarity index [（O＋N）/C], and positively correlated with the aromaticity of the biosorbents. For a given biosorbent, a positive linear correlation between logKoc and logKow for different PAHs was observed. Interestingly, the linear plots of logKoc-logKow were parallel for different biosorbents. These observations suggest that the raw and modified plant residues have great potential as biosorbents to remove PAHs from wastewater.     

4种典型溴代阻燃剂对离体条件下罗非鱼肝脏抗氧化系统影响的研究

以罗非鱼(Mossambica tilapia)为实验生物,研究了离体条件下其肝脏抗氧化系统中谷胱甘肽(GSH)含量、谷胱甘肽硫转移酶(GST)和超氧化物歧化酶(SOD)活性对4种溴代阻燃剂(Brominated flame retardants,BFRs)——四溴联苯醚(BDE-47)、十溴联苯醚(BDE-209)、六溴环十二烷(HBCD)和四溴双酚A(TBBPA)的响应.研究结果表明:离体暴露于4种BFRs 1 h后,罗非鱼肝脏上清液中GSH含量和SOD活性随暴露剂量升高均呈现先升高后回落的趋势,但总体均高于对照组水平;GST活性则被抑制.上述3种抗氧化参数中,同一参数对4种BFRs响应均呈现一致的变化趋势,其中GST和SOD活性响应更为灵敏.GST活性对BDE-47、BDE-209和HBCD的最低响应浓度均低于1 ng·L-1,且与TBBPA和BDE-209在一定浓度范围内存在较好的剂量-效应关系;SOD活性对4种BFRs暴露较为敏感,最低响应浓度均低于10 ng·L-1,并且与除BDE-209外的上述3种污染物在一定的浓度范围内具有良好的剂量-效应关系.因此,GST和SOD活性指标是值得进一步研究的溴代阻燃剂污染候选生物标志物.     

陶粒CANON反应器的接种启动与运行

通过CANON接种污泥,以人工配制无机高氨氮废水为对象,研究以陶粒为填料的CANON反应器启动与运行情况,结果表明:①陶粒可以作为CANON反应器合适填料,温度通过水浴控制在30℃±1℃,HRT为9 h、pH控制在7.00~8.08之间,经过60 d成功启动了CANON反应器,TN的去除负荷达到0.79 kg·(m3·d)-1;②在温度30℃时,陶粒CANON反应器中临界DO范围在1.12~1.69 mg·L-1之间,CANON反应器中短程硝化和厌氧氨氧化性能可维持稳定,高于此范围时,会出现CANON反应器中短程硝化不稳定现象;③在温度25℃,控制DO在1.01~1.54 mg·L-1之间时,尽管NO-3-N变化值与TN变化值的比值(δNO-3-N/δTN)略微偏离理论值0.127,为0.150~0.204,但CANON反应器脱氮性能趋于稳定,TN去除率最高为75.56%,TN的去除负荷最高达到0.97 kg·(m3·d)-1,这意味着CANON工艺的适宜温度范围至少可以降低至25℃.     

模拟土壤团聚体中金属离子的吸附-还原解吸

通过高分子水凝胶包裹技术,研究了不同的团聚体模拟体系中金属离子的吸附-生物还原解吸机制。结果表明:无定形铁矿物模拟团聚体对于金属离子的吸附量高于针铁矿模拟团聚体,且交联密度1.0%包裹组金属离子吸附量小于0.3%包裹组。在希瓦氏菌的作用下,凝胶包裹的铁矿物体系中亚铁浓度先升高后下降,而铁矿物上吸附的Cu2+和Mn2+则随着生物还原作用而解吸释放;针铁矿组的解吸量低于无定形铁矿物,而交联密度高的1.0%包裹组金属离子解吸量高于0.3%包裹组。在凝胶包裹的水稻土团聚体体系中,生物还原作用同样会引起铜/镍/钴/锰离子的溶出,从而影响土壤环境中重金属污染的迁移转化。     

堆积体滑坡的成因及稳定性分析——以黟县林川滑坡为例

林川滑坡是较典型的因不合理采石而形成的堆积体碎石土滑坡,其形成明显受人为活动影响。在野外调查和室内研究的基础上,分析了该滑坡的地质结构、形成机制和控制因素。运用不平衡推力法计算天然和久雨状态下滑坡的稳定性。结果表明,天然状态下,A-A′剖面所在区域目前均处于稳定状态,C-C′剖面和D-D′剖面区域均处于基本稳定状态。久雨饱和状态下,滑坡三个剖面区域均处于不稳定状态。通过分析三个剖面各条块的推力计算数据,认为该滑坡失稳时可能不是整体滑动,而是在坡体中部滑面倾角变化较大处开始拉裂,裂缝下部坡体滑动,上部坡体保持局部稳定。根据该滑坡的变形特征提出了相应的防治建议。     

矸石边坡中锚固格构梁组合喷射砼的支护机理研究

为了研究矸石边坡中锚固格构梁组合喷射砼的支护机理、力学特征及对稳定性的影响,基于FLAC3D内嵌的Cable,Beam和Shell结构单元建立了相关数学模型,结合工程实例进行了深入研究。结果表明:支护后,坡体拉剪塑性区缩小明显,剪应力增高带移至锚杆末端,坡面和锚杆加固区内剪应力降低;喷射砼后,格构梁所受轴力、弯矩更大,锚杆拉力与锚固体粘结应力也更大。建议在安全储备足够的前提下,薄喷混凝土,既减小格构梁和锚杆受力又提高经济性。     

锦州市环境空气臭氧污染现状及浓度变化特征分析

O3是城市大气污染物中首要的光化学污染物,本文利用2014年锦州市环境空气自动监测数据,对环境空气O3浓度的频率分布、全年超标情况、O3浓度的每日变化、臭氧与其光化学反应前体物的日变化等进行分析总结;O3每日的小时平均浓度变化和季节浓度变化以及每日的O3与N0X、CO、PM2.5等反应前体污染物的浓度变化规律明显。     

混凝-超滤处理径流雨水效果——以华南地区为例

采用超滤膜(UF)为核心,以混凝作为预处理措施,对混凝-超滤工艺处理径流雨水的特性和膜通量变化与污染现象进行了研究,并对聚合硫酸铁(PFS)单独混凝、UF、PFS-UF组合工艺进行了对比;在优化混凝基础上,考察了混凝-UF对常规水质指标及总磷、生物可同化有机碳(AOC)、可生物降解溶解性有机碳(BDOC)等生物稳定性指标的去除效果.结果表明,混凝可有效去除TOC、UV254和总磷,混凝剂投加量与污染物去除近似呈线性关系.各混凝剂除浊效能均良好.综合考虑混凝处理效率与经济性,实验采用混凝方案为10 mg·L-1的PFS.PFS、UF、PFS-UF工艺除浊率均在95%以上,PFS和UF对TOC和UV254的去除较为接近,采用PFS-UF可提高去除率13%—15%;PFS-UF处理后雨水的AOC、BDOC分别降低至61.8μg·L-1、0.19 mg·L-1,残余总磷可降至3.8μg·L-1,雨水生物稳定性明显提高.PFS、UF和PFS-UF对颗粒物的去除率分别达80.5%、99.6%和99.9%.膜通量的变化和SEM图分析表明,混凝在一定程度上减轻了UF膜污染;形成的凝胶层具有一定整体强度,水力清洗时易于清除,膜通量恢复较好;但同时凝胶层的产生也增大了透膜阻力,PFS-UF工艺的周期内膜通量衰减有增加的趋势.