Generation and characterization of diesel exhaust in a facility for controlled human exposures

An idling medium-duty diesel truck operated on ultralow sulfur diesel fuel was used as an emission source to generate diesel exhaust for controlled human exposure. Repeat tests were conducted on the Federal Test Procedure using a chassis dynamometer to demonstrate the reproducibility of this vehicle as a source of diesel emissions. Exhaust was supplied to a specially constructed exposure chamber at a target concentration of 100 microg x m(-3) diesel particulate matter (DPM). Spatial variability within the chamber was negligible, whereas emission concentrations were stable, reproducible, and similar to concentrations observed on the dynamometer. Measurements of nitric oxide, nitrogen dioxide, carbon monoxide, particulate matter (PM), elemental and organic carbon, carbonyls, trace elements, and polycyclic aromatic hydrocarbons were made during exposures of both healthy and asthmatic volunteers to DPM and control conditions. The effect of the so-called "personal cloud" on total PM mass concentrations was also observed and accounted for. Conventional lung function tests in 11 volunteer subjects (7 stable asthmatic) did not demonstrate a significant change after 2-hr exposures to diesel exhaust. In summary, we demonstrated that this facility can be effectively and safely used to evaluate acute responses to diesel exhaust exposure in human volunteers.     

Xeno-estrogenic compounds in precipitation

The exposure to some chemicals can lead to hormone disrupting effects. Presently, much attention is focused on so-called xeno-estrogens, synthetic compounds that interact with hormone receptors causing a number of reactions that eventually lead to effects related to reproduction and development. The current study was initiated to investigate the presence of a number of such compounds in precipitation as a follow-up on a previous study in which pesticide concentrations in air and precipitation were determined. Rainwater samples were collected at about 50 locations in The Netherlands in a four week period. The samples were analysed for bisphenol-A, alkylphenols and alkylphenol ethoxylates, phthalates, flame retardants and synthetic musk compounds. The results clearly indicated the presence of these compounds in precipitation. The concentrations ranged from the low ng l(-1) range for flame retardants to several thousands of ng l(-1) for the phthalates. Bisphenol-A was found in 30% of the samples in concentrations up to 130 ng l(-1), while alkylphenols and alkylphenol ethoxylates were found in virtually all locations in concentrations up to 920 ng l(-1) for the individual compounds. Phthalates were by far the most abundant xeno-estrogens in the precipitation samples and were found in every sample. Di-isodecyl phthalate was found in a surprisingly high concentration of almost 100 000 ng l(-1). Polybrominated flame retardants were found in the low ng l(-1) range and generally in less than 20% of the samples. Noticeable was the finding of hexabromocyclododecane, a replacement for the polybrominted diphenyl ethers at one location in a concentration of almost 2000 ng l(-1). Finally, as expected, synthetic musk compounds were detected in almost all samples. This is especially true for the polycyclic musks HHCB and AHTN. Nitro musks were found, but only on a few locations. Kriging techniques were used to calculate precipitation concentrations in between actual sampling locations to produce contour plots for a number of compounds. These plots clearly show located emission sources for a number of compounds such as bisphenol-A, nonylphenol ethoxylate, phthalates and AHTN. On the contrary, the results for HHCB and some phthalates indicated diffuse emission patterns, probably as the result of the use of consumer products containing these compounds.     

The value of EHS auditing in the United States: Solutions for audit protection

Conventional wisdom has advocated environmental auditing as a prudent part of an internal control program and one of the key tools in driving proactive efforts. As a part of risk management activities, it is often employed to protect an organization and its employees and officers from liability. Conscientious use of such audits has undoubtedly protected human health and the environment. Ironically, those who make the most consistent efforts to audit compliance and management systems, according to advocates of audit protection, may be the most vulnerable to enforcement actions and lawsuits. In this, the second part of a two-part article, we turn our attention to the likely solutions for audit protection in the current context.     

SIMULATION – A TOOL FOR WATER RESOURCE MANAGEMENT1

ABSTRACT: Proper economic evaluation of alternative plans will maximize the utility achieved from the resources available for water resource management. A knowledge of the frequency of occurrence of the events under study is necessary to fully utilize the advantages of economic evaluation in planning. Frequency information is widely used in flood control and water supply, but relatively unknown in water quality planning. A continuous, dynamic hydrologic and water quality model is presented to develop frequency curves for various water quality criteria. Results from the Denver Regional Water Quality Management Study are discussed as an example of the use of frequency analysis for economic evaluation of water quality management.     

Stricter Ozone Ambient Air Quality Standard Has Beneficial Effect on Ponderosa Pine in California

Ambient air quality standards and control strategies are implemented to protect humans and vegetation from adverse effects. We used a process-based tree-growth model (TREGRO) to show that over the past 37 years, changes in O₃ exposure, with accompanying variation in climate, are reflected in changes in the growth of Pinus ponderosa Dougl. ex Laws. in the San Bernardino Mountains near Los Angeles, California, USA. Despite variation in temperature and precipitation over the study period (1963–1999), O₃ exposure consistently reduced simulated tree growth. Simulated growth reductions increased concurrent with increasing O₃ exposure. The maximum growth reduction occurred in 1979. As O₃ exposures decreased during the 1980s and 1990s, effects on growth also decreased. This implies that emission control strategies taken to reduce exposures to attain O₃ standards benefited P. ponderosa growth in the San Bernardino Mountains. This modeling approach provides a powerful tool for solving the difficult problem of evaluating regulatory effectiveness by simulating plant response using long-term climate and air pollution exposure records for a given region.Phone 541 754-4621 Fax 541 754-4799     

Assessing the effects of transboundary ozone pollution between Ontario,Canada and New York,USA

We investigated the effects of transboundary pollution between Ontario and New York using both observations and modeling results. Analysis of the spatial scales associated with ozone pollution revealed the regional and international character of this pollutant. A back-trajectory-clustering methodology was used to evaluate the potential for transboundary pollution trading and to identify potential pollution source regions for two sites: CN tower in Toronto and the World Trade Center in New York City. Transboundary pollution transport was evident at both locations. The major pollution source areas for the period examined were the Ohio River Valley and Midwest. Finally, we examined the transboundary impact of emission reductions through photochemical models. We found that emissions from both New York and Ontario were transported across the border and that reductions in predicted O3 levels can be substantial when emissions on both sides of the border are reduced.     

Application of recombinant gene technology for production of polyhydroxyalkanoic acids: Biosynthesis of poly(4-hydroxybutyric acid) homopolyester

Screening of a large number of bacteria revealed several strains, which utilize 1,4-butanediol and/or 4-hydroxybutyric acid (4HB) as a carbon source for growth and for synthesis of polyhydroxyalkanoic acids (PHA) containing 4HB as one constituent among others (mostly 3-hydroxybutyric acid). However, none of the wild-type strains investigated in this study was able to produce a homopolyester consisting solely of 4HB. Only several poly(3-hydroxybutyric acid)-leaky mutants ofAlcaligenes eutrophus strain JMP222 synthesized poly(4HB) homopolyester, which amounted to approximately 10% (w/w) of the cellular dry matter. If the PHA synthase structural gene ofA. eutrophus strain H16 was expressed in these mutants, the amount of poly(4HB) was increased to approximately 30% (w/w). The occurrence of poly(4HB) was demonstrated by gas chromatographic as well as¹H and¹³C nuclear magnetic resonance spectroscopic analysis.Paper presented at the Bio/Environmentally Degradable Polymer Society—Second National Meeting, August 19–21, 1993, Chicago, Illinois.     

DISTRIBUTION OF BENTHIC MACROINVERTEBRATES IN A STREAM EXPOSED TO URBAN RUNOFF1

ABSTRACT: A study of benthic macroinvertebrate community composition was conducted at eight sites along Shabakunk Creek, a small stream in Mercer County, New Jersey, which receives urban runoff. The relationship between changes in substrate composition and the nature of the benthic macroinvertebrate community has been examined. Organisms were collected seasonally from natural substrates in riffles. Attempts to employ artificial substrates for invertebrate collection proved unsuccessful, as the population on the samplers was not representative of that in the stream bed. Number of total benthic macroinvertebrate taxa collected declined from 13 in relatively undeveloped upstream areas to four below heavily developed areas, while population density decreased simultaneously in the same areas. Periphyton samples collected from natural substrates were analyzed for selected heavy metals. Significantly higher heavy metal concentrations are reported from substrates sampled below heavily developed areas, and changes in these values are discussed with regard to changes in benthic macroinvertebrate distribution.     

Comparison of field-observed and model-predicted plume trends at fuel-contaminated sites: implications for natural attenuation rates

Subsequent to modeling of natural attenuation processes to predict contaminant trends and plume dynamics, monitoring data were used to evaluate the effectiveness of natural attenuation at reducing contaminant concentrations in groundwater at seven fuel-contaminated sites. Predicted and observed contaminant trends at seven sites were compared in order to empirically assess the accuracy of some fundamental model input parameters and assumptions. Most of the models developed for the study sites tended to overestimate plume migration distance, source persistence, and/or the time required for the benzene, toluene, ethyl benzene, and xylenes (BTEX) plumes to attenuate. Discrepancies between observed and predicted contaminant trends and plume behavior suggested that the influence of natural attenuation process may not have been accurately simulated. The conservatism of model simulations may be attributed to underestimation of natural source weathering rates, overestimation of the mass of contaminant present in the source area, and/or use of overly conservative first-order solute decay rates.