Distribution and leaching characteristics of trace elements in ashes as a function of different waste fuels and incineration technologies

Impact of waste fuels (virgin/waste wood, mixed biofuel (peat, bark, wood chips) industrial, household, mixed waste fuel) and incineration technologies on partitioning and leaching behavior of trace elements has been investigated. Study included 4 grate fired and 9 fluidized boilers. Results showed that mixed waste incineration mostly caused increased transfer of trace elements to fly ash; particularly Pb/Zn. Waste wood incineration showed higher transfer of Cr, As and Zn to fly ash as compared to virgin wood. The possible reasons could be high input of trace element in waste fuel/change in volatilization behavior due to addition of certain waste fractions. The concentration of Cd and Zn increased in fly ash with incineration temperature. Total concentration in ashes decreased in order of Zn > Cu > Pb > Cr > Sb > As > Mo. The concentration levels of trace elements were mostly higher in fluidized boilers fly ashes as compared to grate boilers (especially for biofuel incineration). It might be attributed to high combustion efficiency due to pre-treatment of waste in fluidized boilers. Leaching results indicated that water soluble forms of elements in ashes were low with few exceptions. Concentration levels in ash and ash matrix properties (association of elements on ash particles) are crucial parameters affecting leaching. Leached amounts of Pb, Zn and Cr in > 50% of fly ashes exceeded regulatory limit for disposal. 87% of chlorine in fly ashes washed out with water at the liquid to solid ratio 10 indicating excessive presence of alkali metal chlorides/alkaline earths.     

垃圾填埋场渗沥液排放标准的讨论

通过垃圾填埋场渗沥液的来源，性质以及对环境的影响等情况和国内对渗沥液的处理技术分析，根据目前处理渗沥液的技术水平，建议制定适当当前保护环境需要的行业排放标准。     

氢化物发生原子荧光法在测定土壤中浸出硒、总硒的应用

应用氢化物发生原子荧光光谱法研究了测定基地土壤中的浸出硒、总硒的技术。称取一定量土样置于烧杯中,加蒸馏水间歇手动搅拌2小时后放置过夜,取上清液测有效硒;用HNO3-HF-HClO4分解法全量消解样品,同时做全程空白实验,样品处理后加入10%硫脲-10%抗坏血酸混合改进剂以消除Cu、Ag、Ni、Pd等金属离子的干扰,并以1%硼氢化钠为还原剂,在25%的盐酸介质中测定总硒。其浸出态硒测定的检出限为1.5×10-3mg/kg,总硒测定的检出限为0.032mg/kg。     

危险废物浸出毒性试验方法的研究

在分析各国危险废物浸出毒性试验方法的基础上,综合考虑我国气候状况(降雨量、酸雨现状)及工业固体废物处理处置现状,提出我国危险废物浸出毒性研究的技术路线为:通过模拟工业固体废物填埋场在不规范填埋处置且受酸雨影响条件下,有毒物质浸出向地下渗滤造成对地下水的污染,确定浸出毒性的浸取方法.浸出毒性保护目标为地下水,同时还介绍了主要技术参数液固比、浸取剂pH值和类型的确定方法.     

Biochar: A review of its impact on pesticide behavior in soil environments and its potential applications

Biochar is produced from the pyrolysis of carbon-rich plant- and animal-residues under low oxygen and high temperature conditions and has been increasingly used for its positive role in soil compartmentalization through activities such as carbon sequestration and improving soil quality. Biochar is also considered a unique adsorbent due to its high specific surface area and highly carbonaceous nature. Therefore, soil amendments with small amounts of biochar could result in higher adsorption and, consequently, decrease the bioavailability of contaminants to microbial communities, plants, earthworms, and other organisms in the soil. However, the mechanisms affecting the environmental fate and behavior of organic contaminants, especially pesticides in biochar-amended soil, are not well understood. The purpose of this work is to review the role of biochar in primary processes, such as adsorption–desorption and leaching of pesticides. Biochar has demonstrable effects on the fate and effects of pesticides and has been shown to affect the degradation and bioavailability of pesticides for living organisms. Moreover, some key aspects of agricultural and environmental applications of biochar are highlighted.     

海口市蔬菜土壤重金属含量特征研究

采用野外调查法结合实验室分析法对海口市郊区蔬菜土壤重金属含量特征进行研究,测定了Cr、As、Cd、Cu、Zn、Pb、Ni、和Hg 8种重金属全量、有效态含量及蔬菜土壤pH值和有机质含量,重金属全量与有效态含量间的相关性及土壤pH值,有机质含量与蔬菜土壤中重金属全量间的相关性。结果表明,海口市蔬菜土壤中各种重金属均表现出一定的累积趋势;8种重金属元素有效态含量与全量呈正相关,重金属有效态占全量比例在1.86%~13.47%之间,其中Cd、Pb和Hg较高,分别为13.47%、10.23%和8.42%,三者表现出较大的潜在污染风险;土壤p H值和有机质含量与重金属全量表现出一定的相关性,相关性大小与重金属种类有关;重金属全量并不能全面正确评价土壤的环境效应,对蔬菜土壤重金属污染程度进行评价时,应把重金属全量、有效态含量与土壤基本理化性质结合起来进行研究。     

A study of Cr(VI) in ashes from fluidized bed combustion of municipal solid waste: leaching, secondary reactions and the applicability of some speciation methods

The use of the fluidized bed technique for the combustion of municipal solid waste is a rather new concept. This type of combustor produces ash residues with somewhat different properties than the residues generated from the traditional mass burn techniques. Therefore, chemical characterization and the investigation of toxic metals behavior during ash water reactions are necessary for the safe disposal of these residues. In the present work, the total elemental composition, mineralogy and leaching behavior of ashes from the combustion of municipal solid waste in a fluidized bed combustion boiler have been investigated. The cyclone ash and, in particular, the filter ash contained considerable amounts of soluble substances, thus giving leachates with high levels of Cl-, Na+, K+, Ca2 + and Al(IIl). On the other hand, the two ash fractions taken in the boiler, the bottom and hopper ashes, were much more stable with respect to the release of salts and heavy metals. Since Cr(VI) is mobile and toxic its release from combustion residues can pose environmental problem. Even though the total Cr contents were similar in all ashes studied, the bottom ash gave about a thousand times higher levels of Cr(VI) in test leachates than the hopper, cyclone and filter ashes. However, it was found that the leached amount of Cr(VI) from the bottom ash decreased significantly when bottom ash was mixed with the hopper ash. The most probable cause for this decrease is the coupled oxidation of Al(0) to Al(III) and reduction of dissolved Cr(VI) to Cr(III). This finding that the mixing of two ash streams from the same boiler could result in the immobilization of Cr may point at a simple stabilization method. Selective extraction of water soluble, exchangeable and sparingly soluble forms of Cr(VI) was also investigated. Extraction methods were evaluated for their suitability for ash matrixes. It was found that interferences due to the presence of reducing substances in some ash materials may occur.     

Characteristics, treatment and utilization of residues from municipal waste incineration

Beneficial utilization of residues from municipal solid waste incineration is an important objective for integrated waste management in many jurisdictions. When residues are to be used as an aggregate substitute in construction applications, the release of constituents of concern to soils and water through leaching is an important environmental consideration. In this paper, residue characteristics that control constituent leaching and testing approaches for evaluating leaching are discussed. Quality control and potential improvement in case of beneficial application are addressed.     

Metallic-phase lead in slag of municipal solid waste incineration ash and leaching characteristics

Metallic phases in slags and their influence on the leaching characteristics were investigated. The proportions of metallic phase in four slags were 0.028%, 0.24%, 1.87%, and 3.05% by weight. The lead content was 10–248 mg/kg in bulk slag after metal removal, while in the metallic phase it was 579–7390 mg/kg. Lead concentrations in the metallic phase were more than ten times higher than in slags after metal removal. Lead was distributed in the metallic phase at 2.0%, 8.3%, 10.3%, and 47.4%. The concentrations of all metallic elements in metallic phases were much higher than in bulk slag. Iron, copper, and nickel had accumulated in magnetic metals, while aluminum and zinc were found in nonmagnetic metals. As regards chromium, manganese, lead, and tin, the proportion of metallic phases depended on the slag samples. By removing metallic phases, both water and pH 4 leachable lead decreased. The basic principles of melting residues containing lead are the separation of lead as a metal in reductive melting, and the containment of lead ions into uniform glassy particles in oxidization melting. Melting slag can be seen to contribute to environmental preservation by facilitating the recycling of materials through the separation of metals from melting slag. Received: February 21, 2000 / Accepted: July 27, 2000     

COMPARISON OF TWO PESTICIDE LEACHING INDICES1

ABSTRACT: Agriculture is the leading cause of regional‐scale non‐point source (NPS) pollution in the world today. Indices of pesticide leaching in the vadose zone are well suited for estimating the spatial accumulation and distribution of NPS pollutants in the near surface. In this study the Attenuation Factor (AF) and the Leaching index (Li) are used to assess the near‐surface leaching potential for 32 important agrochemicals for world average agricultural soil properties and recharge rates. The AF and Li indices both require the same input data and appear to work well for nonpolar chemicals. In the effort reported here the AF and Li indices produced similar results for the 32 agrochemicals. Pesticides with high and moderate leaching potential are identified. The AF estimates were more constant than the Li estimates for changes in the compliance depth and recharge rate. The AF index is simpler to use than the Li index and, therefore, is more likely to be employed in the future for screening/ranking agrochemicals relative to regional‐scale NPS ground water vulnerability.