Satellite Precipitation Measurements for Water Resource Monitoring1

Abstract: Satellites offer an unrivaled vantage point to observe and measure Earth system processes and parameters. Observations of meteorological phenomena permit a more holistic view of the weather and climate that is not possible through conventional surface observations. Precipitation (rain and snow) in particular, benefit from such observations since precipitation is spatially and temporally highly variable: conventional gauge and radar measurements tend to be land‐based with variable coverage. This paper provides an overview of the satellite systems that provide the observations, the techniques used to derive precipitation from the observations, and examples of the precipitation products available for users to access.     

Understanding the security management practices of humanitarian organizations

Humanitarian organisations operate in increasingly hostile environments. Although authoritative statistics are scarce, anecdotal evidence suggests that aid workers face life-threatening risks that are exacerbated by the growing number of humanitarian organisations operating in the field, the diversity of their mandates, the lack of common professional security standards, and limited success in inter-agency security coordination. Despite broad acceptance of the need for better security management and coordination, many humanitarian organisations remain ambivalent about devoting increased resources to security management and security coordination. A critical lack of basic empirical knowledge of the field security environment hampers efforts to enhance security management practices. The absence of a systematic means of sharing incident data undermines the capacity of the humanitarian community to address proactively security threats. In discussions about humanitarian staff safety and security, the least common denominator remains cumulative anecdotal evidence provided by the many security personnel working for humanitarian organisations in the feld.     

Environmental and economic aspects of water kiosks: Case study of a medium-sized Italian town

The consumption of bottled water in Italy began in the 1970s. Since then, this usage has grown considerably, also as a result of changes in habits. The environmental impact as a result of the water production chain is very significant; it would be considered, for example, the use of plastic bottles, the consumption of oil in the production of the bottles, the emission of air from the vehicles that transport the bottles, non-recycled plastic packaging, etc.In this study, considering the comparison between two situations, use of bottled water and use of water kiosk (WK), an environmental and economic impact evaluation has been done. The study considered the production of a WK in a town with 9000 inhabitants, which supplies controlled, still and sparkling water, with an organoleptic quality higher than tap water coming from the aqueduct. In particular, taking into consideration the environmental aspects, specific attention was paid both to CO₂ emissions and PET bottle waste reduction. The economic impact evaluation was carried out from the consumer’s point of view. In order to provide a supply service that was economically sustainable, a calculation was done with the aim of determining a specific fee for the supplied water. Moreover, a comparison has been made between quality parameters achieved with the analysis of water from aqueducts with the limits established in the Italian legislation and the parameters of several Italian water brands.The study has the aim at considering the opportunity to follow a different people’s habits, closer to the concept of sustainability, reducing the environmental charge related to the realization, transport and consumption of plastic water bottles without significant reduction of the quality of the service and with convenient and interesting economic implications. In fact the results of the study show that the alternative of WKs is more efficient in economic and environmental terms respect to the use of bottled water.     

Voltammetric and Spectroscopic Determination of Toxic Metals in Sediments and Sea Water of Salerno Gulf

In this present work the distribution of heavy metals in sea water and sediments of the Salerno Gulf is measured. The elements determined were Cu, Pb, Cd, Zn and Hg, employing, as instrumental techniques, either differential pulse anodic stripping voltammetry (DPASV) or graphite furnace atomic absorption spectroscopy (GFAAS). A comparison of the results of the two analytical techniques is also made. Mercury determination was carried out employing the cold vapour atomic absorption spectroscopy (CVAAS) technique, with SnCl₂ as the reducing agent. The sample digestion was performed by a new procedure using concentrated suprapure H₂SO₄–K₂Cr₂O₇ mixture. The accuracy and precision of the analytical procedure were evaluated employing Sea Water BCR-CRM 403 and Estuarine Sediment BCR-CRM 277 as reference materials. Accuracy, expressed as relative error e and precision, expressed as relative standard deviation s_r, were in order of 2 to 5%. For both matrices, the detection limits, for all the elements, were in the range g g_-1 to ng g_-1.     

Effect of temperature tuning on the aerosol acoustic aggregation process

Diesel exhaust aerosols(DEAs) can absorb and accumulate toxic metal particulates and bacteria suspended in the atmospheric environment, which impact human health and the environment.The use of acoustic standing waves(ASWs) to aggregate DEA is currently considered to be an efficient particle removal method; however, study of the effect of different temperatures on the acoustic aggregation process is scarce. To explore the method and technology to regulate and optimize the aerosol aggregation process through temperature tuning, an acoustic apparatus integrated with a temperature regulation function was constructed. Using this apparatus, the effect of different characteristic temperatures(CTs) on the aerosol aggregation process was investigated experimentally in the ASW environment. Under constant conditions of acoustic frequency 1.286 kHz, voltage amplitude 17 V and input electric power 16.7 W, the study concentrated on temperature effects on the aggregation process in the CT range of 58–72°C. The DEA opacity was used. The results demonstrate that the aggregation process is quite sensitive to the CT, and that the optimal DEA aggregation can be achieved at 66°C. The aggregated particles of 68.17 μm are composed of small nanoparticles of 13.34–62.15 nm. At CTs higher and lower than 66°C, the apparatus in non-resonance mode reduces the DEA aggregation level. For other instruments, the method for obtaining the optimum temperature for acoustic agglomeration is universal. This preliminary demonstration shows that the use of acoustic technology to regulate the aerosol aggregation process through tuning the operating temperature is feasible and convenient.     

Validation and global uncertainty of a gas chromatographic with mass spectrometry method for fenamidone analysis in grapes and wines

Fenamidone is an imidazolinone fungicide recently introduced in viticulture practices. This work reports the validation and assessment of global uncertainty of a gas chromatographic with mass spectrometry method to analyze fenamidone in grapes and wines. This method consists in a simple and fast liquid-liquid extraction step followed by chromatographic determination. Limits of detection for fenamidone in grapes and wines were, respectively, 0.05 mg/kg and 0.06 mg/L, precision was below 9.4% and average recovery was 89 ± 5%. In the concentration range from 0.05 to 1.00 mg/kg (or mg/L) of fenamidone, global uncertainty calculated following the EURACHEM/CITAC rules, and also by the Horwitz function, was below 25%. The EURACHEM/CITAC global uncertainty budget used gave lower estimates than those obtained from the Horwitz function.     

Minor crops for export: A case study of boscalid,pyraclostrobin, lufenuron and lambda-cyhalothrin residue levels on green beans and spring onions in Egypt

Dissipation rates of boscalid [2-chloro-N-(4′ -chlorobiphenyl-2-yl)nicotinamide], pyraclostrobin [methyl 2-[1-(4-chlorophenyl) pyrazol-3-yloxymethyl]-N-methoxycarbanilate], lufenuron [(RS)-1-[2,5-dichloro-4-(1,1,2,3,3,3-hexafluoropropoxy)phenyl]-3-(2,6-difluorobenzoyl)urea] and λ-cyhalothrin [(R)-cyano(3-phenoxyphenyl)methyl (1S,3S)-rel-3-[(1Z)-2-chloro-3,3,3-trifluoro-1-propenyl]-2,2-dimethylcyclopropanecarboxylate] in green beans and spring onions under Egyptian field conditions were studied. Field trials were carried out in 2008 in a Blue Nile farm, located at 70 kilometer (km) from Cairo (Egypt). The pesticides were sprayed at the recommended rate and samples were collected at pre-determined intervals. After treatment (T₀) the pesticide residues in green beans were 7 times lower than in spring onions. This is due to a different structure of vegetable plant in the two crops. In spring onions, half-life (t_1/2) of pyraclostrobin and lufenuron was 3.1 days and 9.8 days respectively. At day 14th (T₁₄) after treatment boscalid residues were below the Maximum Residue Limit (MRL) (0.34 versus 0.5 mg/kg), pyraclostrobin and λ -cyhalothrin residues were not detectable (ND), while lufenuron residues were above the MRL (0.06 versus 0.02 mg/kg). In green beans, at T₀, levels of boscalid, lufenuron and λ -cyhalothrin were below the MRL (0.28 versus 2 mg/kg; ND versus 0.02 mg/kg; 0.06 versus 0.2 mg/kg, respectively) while, after 7 days treatment (T₇) pyraclostrobin residues were above the MRL (0.03 versus 0.02 mg/kg). However, after 14 days the residue level could go below the MRL (0.02 mg/kg), as observed in spring onions.     

Air quality biomonitoring through pollen viability of Fabaceae

In this study, pollen viability and germination of three plant species, Cercis siliquastrum L., Robinia pseudoacacia L., and Spartium junceum L., belonging to the Fabaceae family, was evaluated in sites with different intensity of road traffic, constantly monitored with continuous analysers for air pollutants (carbon monoxide (CO), sulphur dioxide (SO₂), and nitrogen dioxide (NO₂)) by the Municipality of Catania. Two sites, in which road traffic was absent, were selected, too. The percentages of viable pollen by 2,3,5-trypheniltetrazolium chloride (TTC) test ranged from 59.0 to 90.2 % in C. siliquastrum, from 61.5 to 83.5 % in S. junceum and from 67.5 to 84.3 % in R. pseudoacacia. The percentages of germination varied from 41.0 to 72.7 % in C. siliquastrum, from 42.0 to 64.7 % in S. junceum and from 38.3 to 66.3 % in R. pseudoacacia. The highest percentages of viable pollens were found in no-road traffic stations by either TTC or germination tests, while the lowest values were detected in a site characterised by heavy road traffic. In the monitored period (2007–2009), pollen viability, germinability and tube length of C. siliquastrum resulted in a significant negative correlation to CO, SO₂ and NO₂, whereas data from TTC and germination tests on S. junceum and R. pseudoacacia pollens were not well correlated to air pollutants. The results showed that pollen viability, germination and tube growth in C. siliquastrum were affected by air pollution. S. junceum and R. pseudoacacia were not very influenced by air pollutants, suggesting a different pollen sensitivity of these species.     

Fungitoxicity of lyophilized and spray-dried garlic extracts

Among the compounds discussed for anti-microbial and anti-fungal use allicin (allylthiosulfinate, diallyl disulfide-S-monoxide), an active ingredient of garlic, has attracted considerable attention. The objective of this study is to determine the antifungal activity of a local garlic ecotype (Voghiera) extracts against different pathogens. Primary screening was carried out by the agar plates technique using ethanol garlic extract at four final concentrations against the following organisms: Alternaria alternata, Aspergillus spp., Colletotrichum acutatum, Didymella bryoniae, Fusarium culmorum, Fusarium avenaceum, Fusarium gramineareum, Gliocladium roseum 47, Pythium splendens, Rhizoctonia solani, Sclerotium rolfsii, Stemphylium vesicarium, Trichoderma longibranchiatum, and Botrytis cinerea. Secondary screening was carried out using a lyophilized and a spray-dried preparation at different concentrations against the organisms selected for the high inhibition garlic effect in the primary screening and compared with the commercial fungicides mancozeb and iprodione. The best results were observed for the spray-dried garlic compound that showed a good fungicidal activity at the concentration of 1.5 g/10 mL while lyophilized garlic at the same concentration exhibited less inhibition activity against the four fungi analyzed in the second screening.     

Numerical simulation of water mixing and renewals in the Barcelona harbour area: the winter season

In the present paper, we use numerical simulation to investigate currents, mixing and water renewal in Barcelona harbour under typical conditions of wind forcing for the winter season. This site is of particular importance due to the interplay between touristic and commercial activities, requiring detailed and high-definition studies of water quality within the harbour. We use Large Eddy Simulation (LES) which directly resolves the anisotropic and energetic large scales of motion and parametrizes the small, dissipative, ones. Small-scale turbulence is modelled by the anisotropic Smagorinsky model (ASM) to be employed in presence of large cell anisotropy. The complexity of the harbour is modelled using a combination of curvilinear, structured, non-staggered grid and the immersed boundary method. Boundary conditions for wind and currents at the inlets of the port are obtained from in-situ measurements. Analysis of the numerical results is carried out based on both instantaneous and time-averaged velocity fields. First- and second-order statistics, such as turbulent kinetic energy and horizontal and vertical eddy viscosities, are calculated and their spatial distribution is discussed. The study shows the presence of intense current in the narrow and elongated part of the harbour together with sub-surface along-shore elongated rolling structures (with a time scale of a few hours), and they contribute to the vertical water mixing. Time-averaged velocity field reveals intense upwelling and downwelling zones along the walls of the harbour. The analysis of second-order statistics shows strong inhomogeneity of turbulent kinetic energy and horizontal and vertical eddy viscosities in the horizontal plane, with larger values in the regions characterized by stronger currents. The water renewal within the port is quantified for particular sub-domain regions, showing that the complexity of the harbour is such that certain in-harbour basins have a water renewal of over five days, including the yacht marina area. The LES solution compares favourably with available current-meter data. The LES solution is also compared with a RANS solution obtained in literature for the same site under the same forcing conditions, the comparison demonstrating a large sensitivity of properties to model resolution and frictional parametrization.