中国北方典型城市空气中苯系物的污染特征

为了研究中国北方典型城市大气中苯系物的污染状况和季节变化特征,于2008年4月—2009年1月间,选取沈阳和天津共11个监测点位分别采集大气样品,并利用三级冷阱预浓缩-GC-MS方法进行分析.结果表明,天津的苯系物污染浓度比沈阳高,这是因为天津的机动车保有量远远大于沈阳,机动车尾气排放量大.苯系物的污染程度与不同季节的气候变化密切关联,两城市均表现为春秋两季污染严重,冬夏两季污染较轻.城市不同功能区采样点的比较和苯与甲苯(B/T)的比值以及各苯系物之间的相关性分析表明,两城市苯系物污染浓度均受到局部排放源的明显影响,但在大部分地区交通源仍为主要排放源.     

Characteristics of major volatile organic hazardous air pollutants in the urban air of Kaohsiung city

The concentrations and characteristics of volatile organic hazardous air pollutants (HAPs) in the urban city of Kaohsiung from motor vehicles and dense pollutant sources has become a national concern. To continuously monitor volatile organic HAPs, sampling sites were selected near the four air-quality monitoring stations established by Ethe nvironmental Protection Administration of Taiwan ROC, namely Nan-tz, Tso-ying, San-min and Hsiao-kang, from north to south. An on-site automated online monitor of volatile organic compounds (VOCs) was used for continuous monitoring. This study performed two consecutive days of 24-h monitoring of five volatile organic HAPs form August to October 2005 at the four monitoring sites, which cover the northern, central, and southern areas of Kaohsiung city. The average monitored concentration was 2.78–4.84 ppb for benzene, 5.90–9.66 ppb for toluene, 3.62–5.90 ppb for ethylbenzene, 3.73–5.34 ppb for m,p-xylene, 3.38–4.22 ppb for o-xylene, and 4.48–7.00 ppb for styrene. The average monitored concentrations of the major volatile organic HAPs tended to follow the pattern San-min > Nan-tz > Hsiao-kang > Tso-ying. Among all the species monitored in this study, toluene had the highest ambient concentration, followed by styrene, m,p-xylene, ethylbenzene, o-xylene, and benzene. The results showed that the concentration at night was higher than that in the day for toluene at Nan-tz, San-min, Hsiao-kang, and for benzene at Nan-tz and Hsiao-kang.     

BTEX污染含水层不同形态铁含量变化的试验模拟

通过砂柱试验模拟BTEX(苯、甲苯、乙苯和二甲苯的混合物)污染含水层的过程,分析了含水层中铁形态分布及氧化还原环境的变化.结果表明:发生铁还原反应区域介质中的w(TFe)降幅最大,达25.7%;而发生硫酸盐还原反应的区域介质中的w(TFe)因亚铁沉淀生成作用降幅减至11.7%~14.6%.铁还原菌电子受体主要来源于氧化物结合态铁;氧化物结合态铁首先转化为可交换态铁,进而被利用.硫化物结合态铁的形成可作为硫酸盐还原过程开始的标志.      

嗜盐菌群在甲苯降解过程中群落结构的变化解析

从胜利油田的高盐油污土壤中富集到1个高效降解BTEX(苯、甲苯、乙苯、二甲苯)的嗜盐菌群,分析了菌群在甲苯降解过程中的群落结构变化.结果表明,该菌群在5%盐度下可完全降解200mg/L甲苯.PCR-DGGE图谱显示,随着甲苯的加入,该菌群的优势种属由Bacillus sp.和Bacillus aquimaris转变为Thalassospira xiamenensis、Pseudomonas stutzeri、Virgibacillus sp.和Bacillus sp..这4种微生物在整个降解过程中稳定存在,且在降解完成后24h内没有衰亡的迹象.另外,该菌群可以降解菲,显示了降解多种芳香族化合物的能力.     

地下水苯系物污染原位曝气修复模拟研究

通过TMVOC软件模拟了苯系物在拟定渗流区“自然”环境条件下的污染物运移行为和原位曝气修复过程中的污染物衰减过程,确定了最佳曝气流量和所需要的曝气井数量及分布,并对修复效果进行了模拟.模拟显示,泄露过程中,在重力作用下,不饱和区的苯系物以竖直迁移为主,同时在毛细作用下横向迁移;在饱和区中以顺水流方向水平迁移为主,同时会溶解进入地下水,污染羽可到达含水层底部.从含水层底部的7个曝气孔同时以12m3/h的速率将空气注入时,只需180d即可完全修复苯系物污染区域.该条件下单井有效修复半径约5m,有效修复范围优于从含水层中部和中下部进行曝气.     

低温条件下基于TMVOC的土壤气相抽提技术数值模拟

为研究低温条件下土壤气相抽提技术对包气带中苯系物的去除效果、解决修复技术有效性评估等难题,基于TMVOC模型模拟砂箱试验,从浓度梯度、相间转化、饱和度变化等方面分析土壤气相抽提技术对污染物空间分布规律的影响机理.结果表明,TMVOC模拟苯系物浓度的计算值与试验测量值的拟合效果较好;低温条件下,砂箱土体中苯、甲苯、乙苯、邻二甲苯的去除率分别为89.8%、71.3%、29.7%、14.4%.两次抽提过程中,苯在"气-液-NAPL（non-aqueous phase liquid）"三相中的质量均减少,减少比例近似为2:7:1,苯在液相中的质量减幅最大;在间歇期,苯由"NAPL相"以近似3:7的比例向"气、液"两相运移.在砂箱土体上部和中部NAPL相饱和度保持为0,"气-液"两相共存,间接表明苯系物在"气-液"两相间发生运移;在砂箱土体底部污染源附近"气-液-NAPL"相共存,间接表明苯系物在"气-液-NAPL"相间发生运移,抽提作用使得气相与液相饱和度升高、NAPL相饱和度降低.      

Bio-removal of mixture of benzene, toluene, ethylbenzene, and xylenes/total petroleum hydrocarbons/trichloroethylene from contaminated water

Four pure cultures were isolated from soil samples potentially contaminated with gasoline compounds either at a construction site near a gas station in Fai Chi Kei, Macau SAR or in the northern parts of China (Beijing, and Hebei and Shandong). The e ects of di erent concentrations of benzene, toluene, ethylbenzene, and three isomers (ortho-, meta-, and para-) of xylene (BTEX), total petroleum hydrocarbons (TPH), and trichloroethylene (TCE), when they were present in mixtures, on the bio-removal e ciencies of microbial isolates were investigated, together with their interactions during the bio-removal process. When the isolates were tested for the BTEX (50–350 mg/L)/TPH (2000 mg/L) mixture, BTEoX in BTEoX/TPH mixture was shown with higher bio-removal e ciencies, while BTEmX in BTEmX/TPH mixture was shown with the lowest, regardless of isolates. The TPH in BTEmX/TPH mixture, on the other hand, were generally shown with higher bio-removal e ciencies compared to when TPH mixed with BTEoX and BTEpX. When these BTEX mixtures (at 350 mg/L) were present with TCE (5–50 mg/L), the stimulatory e ect of TCE toward BTEoX bio-removal was observed for BTEoX/TCE mixture, while the inhibitory e ect of TCE toward BTEmX for BTEmX/TCE mixture. The bio-removal e ciency for TPH was shown lower in TPH (2000 mg/L)/TCE (5–50 mg/L) mixtures compared to TPH present alone, implying the inhibitory e ect of TCE toward TPH bio-removal. For the mixture of BTEX (417 mg/L), TPH (2000 mg/L) along with TCE (5– 50 mg/L), TCE was shown co-metabolically removed more e ciently at 15 mg/L, probably utilizing BTEX and/or TPH as primary substrates.     

不同下垫面苯系物的挥发行为研究

结合石油化工区挥发性污染物泄漏控制的需要,选取淄博地区代表性的砂土、壤土和水3种下垫面,对苯系物的挥发行为进行试验研究,得到了不同类型下垫面中苯系物单组分及其混合物的挥发动力学曲线、最优拟合公式和挥发动力学模型.结果表明,3种下垫面中,苯系物组分及混合物的挥发速率大小依次为:苯>甲苯>BTEX>二甲苯>乙基苯;而苯系物在静水面上的挥发最快,砂土中次之,壤土中挥发最慢.另外,3种下垫面中苯系物的挥发速率常(系)数与蒸气压的关系均呈线性正相关,挥发速率系数随着组分蒸气压的增大而明显增大.下垫面对苯系物挥发的影响机制主要表现为对挥发面积和介质在挥发扩散过程中可利用孔隙通量的影响.     

第二松花江中下游水体中苯系物含量及分布特征

本次研究采用气质联用仪分析第二松花江中下游江段底泥和水中苯、甲苯、乙苯和二甲苯的含量,并对其分布特征和成因进行了讨论。研究发现,水中苯系物含量均远低于我国地表水环境质量标准和美国国家一级饮用水标准的限值。与国内其他水体相比,第二松花江江水中苯系物含量水平较低。底泥中苯系物含量显著高于水中,市区江段水和底泥中苯系物含量普遍高于非市区江段。     

空气中BTEX检测方法研究进展

BTEX（苯系物）作为空气中的一种痕量组分,主要包括苯、甲苯、乙苯、间-二甲苯、对-二甲苯、邻二甲苯,这些物质可影响人体健康和环境空气质量.分析和探讨了环境空气中BTEX常用的采样、前处理和检测方法,并列举了各方法的国内外应用实例.BTEX采样方法主要包括以下2种:①吸附管采样法,其采样器体积小、便于携带,但易造成穿透现象,样品易损失.②空气采样法,其操作简单、重复使用率高,但清洗复杂、价格较高.BTEX前处理方法主要包括以下3种:①固相微萃取法,其可减少样品与空气接触的机会,自动化程度较高,但难以实现样品的多次分析.②溶剂解析法,因其对环境影响较大,所以应用较少.③热脱附法,其常采用二级热脱附实现样品富集和浓缩,操作过程简单,设备体积相对较大,其升温和降温系统是影响前处理速度和效果的关键.BTEX检测方法主要包括:①质子转移反应质谱法,其灵敏度高,但因其价格昂贵应用较少.②气相色谱-光离子化检测法,其设备体积小巧常用于外场监测中.③差分吸收光谱法、直接空气进样质谱法、低压化学电离质谱法、大气压化学电离质谱法、固相微萃取-气相色谱法、吸附/热脱附-气相色谱-火焰离子检测法/质谱检测法等.研究显示,空气中BTEX的分析方法应根据实际应用条件来确定,在保证分析仪器灵敏度和精确度的基础上,开发外场检测的便携式自动在线分析仪器,提高仪器便携性、自动化、智能化,更好地满足各项标准和部门管理的需求.