Major accident hazard in bioenergy production

Some recent accidents involving the bioenergy production and feedstock supply chain raised concern on the safety of such technologies. A survey of major accidents related to the production of bioenergy (intended as biomass, bioliquids/biofuels and biogas) was carried out, and a data repository was built, based on past accident reports available in the open literature and in specific databases. Data analysis shows that major accidents are increasing in recent years and their number is growing faster than bioenergy production. The results obtained represent an early warning concerning the major accident hazard of bioenergies, and suggest the importance of risk awareness and safety culture in bioenergy production, in the perspective of a safe and sustainable exploitation of renewable resources.     

Mg improves biomass production from soybean wastewater using purple non-sulfur bacteria

Soybean wastewater was used to generate biomass resource by use of purple non-sulfur bacteria (PNSB). This study investigated the enhancement of PNSB cell accumulation in wastewater by Mg^2 + under the light-anaerobic condition. Results showed that with the optimal Mg^2 + dosage of 10 mg/L, biomass production was improved by 70% to 3630 mg/L, and biomass yield also was improved by 60%. Chemical Oxygen Demand (COD) removal reached above 86% and hydraulic retention time was shortened from 96 to 72 hr. The mechanism analysis indicated that Mg^2 + could promote the content of bacteriochlorophyll in photosynthesis because Mg^2 + is the bacteriochlorophyll active center, and thus improved adenosine triphosphate (ATP) production. An increase of ATP production enhanced the conversion of organic matter in wastewater into PNSB cell materials (biomass yield) and COD removal, leading to more biomass production. With 10 mg/L Mg^2 +, bacteriochlorophyll content and ATP production were improved by 60% and 33% respectively.     

Individual particle analysis of aerosols collected at Lhasa City in the Tibetan Plateau

To understand the composition and major sources of aerosol particles in Lhasa City on the Tibetan Plateau (TP), individual particles were collected from 2 February to 8 March, 2013 in Tibet University. The mean concentrations of both PM_2.5 and PM₁₀ during the sampling were 25.7 ± 21.7 and 57.2 ± 46.7 μg/m³, respectively, much lower than those of other cities in East and South Asia, but higher than those in the remote region in TP like Nam Co, indicating minor urban pollution. Combining the observations with the meteorological parameters and back trajectory analysis, it was concluded that local sources controlled the pollution during the sampling. Transmission electron microscopy (TEM) combined with energydispersive X-ray spectra (EDS) was used to study 408 particles sampled on four days. Based on the EDS analysis, a total of 8 different particle categories were classified for all 408 particles, including Si-rich, Ca-rich, soot, K-rich, Fe-rich, Pb-rich, Al-rich and other particles. The dominant elements were Si, Al and Ca, which were mainly attributed to mineral dust in the earth's crust such as feldspar and clay. Fe-, Pb-, K-, Al-rich particles and soot mainly originated from anthropogenic sources like firework combustion and biomass burning during the sampling. During the sampling, the pollution mainly came from mineral dust, while the celebration ceremony and religious ritual produced a large quantity of anthropogenic metal-bearing particles on 9 and 25 February 2013. Cement particles also had a minor influence. The data obtained in this study can be useful for developing pollution control strategies.     

Impact of industrial effluent on growth and yield of rice (Oryza sativa L.) in silty clay loam soil

Degradation of soil and water from discharge of untreated industrial effluent is alarming in Bangladesh. Therefore, buildup of heavy metals in soil from contaminated effluent, their entry into the food chain and effects on rice yield were quantified in a pot experiment. The treatments were comprised of 0, 25%, 50%, 75% and 100% industrial effluents applied as irrigation water. Effluents, initial soil, different parts of rice plants and post-harvest pot soil were analyzed for various elements, including heavy metals. Application of elevated levels of effluent contributed to increased heavy metals in pot soils and rice roots due to translocation effects, which were transferred to rice straw and grain. The results indicated that heavy metal toxicity may develop in soil because of contaminated effluent application. Heavy metals are not biodegradable, rather they accumulate in soils, and transfer of these metals from effluent to soil and plant cells was found to reduce the growth and development of rice plants and thereby contributed to lower yield. Moreover, a higher concentration of effluent caused heavy metal toxicity as well as reduction of growth and yield of rice, and in the long run a more aggravated situation may threaten human lives, which emphasizes the obligatory adoption of effluent treatment before its release to the environment, and regular monitoring by government agencies needs to be ensured.     

Thermal hazard evaluation for γ-valerolactone production by using formic acid as hydrogen donor

Aiming at the green and sustainable energy substitution and supply, biomass valorization has become a potential strategy to face the energy crisis and increasing demand all over the world from long-term perspectives. Among the bio-based chemicals, γ-valerolactone (GVL) production from hydrogenation of levulinic acid (LA) and its esters has attracted great interests due to its wide applications, such as fuel, solvent, and additives. However, the safety evaluation for this hydrogenation reaction has received few attentions. To fill this gap, thermal hazard evaluation for GVL production from LA hydrogenation by using formic acid (FA) as hydrogen donor was first performed. The process conditions were optimized by using orthogonal experimental method for further calorimetry study. Thermal stability of chemicals and thermal risk of reaction process under adiabatic conditions were investigated by applying differential scanning calorimetry and accelerating rate calorimeter Phi-Tec II, respectively. The results revealed that the chemicals were stable in temperature range from 30 to 250 °C except FA due to its evaporation and decomposition with endothermic behaviors. The reaction process under isothermal and adiabatic conditions demonstrates that the decomposition of FA was rapid and followed by the hydrogenation of LA to GVL. Based on kinetic model under adiabatic conditions and risk matrix, the thermal runaway risk was found to be medium, indicating that certain safety measures should be properly designed and taken for loss prevention. This work could benefit the safety design and thermal risk prevention for GVL production by using FA as hydrogen donor.     

Characteristics, evolution, and regional differences of biomass burning particles in the Sichuan Basin, China

The Sichuan Basin has experienced serious air pollution from fine particulate matter (PM_2.5) in the past few years with biomass burning has been identified as a major source of PM_2.5 in this region. We used single particle aerosol mass spectrometer to investigate the characteristics of biomass burning particles in three interacting cities representing different types of urban environment in the Sichuan Basin. A total of 739,794, 279,610, and 380,636 biomass burning particles were detected at Ya'an, Guang'an, and Chengdu, which represented 42%, 69%, and 61%, respectively, of the total number of particles. We analyzed the chemical composition, transportation, and evolution of biomass burning particles. The contribution of K-elemental carbon and K-secondary inorganic particles was highest in Ya'an (36%) and Guang'an (47%), respectively, reflecting the important role of fresh biomass burning particles and long-distance transport in these two cities. Air masses originating from different directions corresponded to different levels of PM_2.5 and the contributions of polluted clusters increased significantly on polluted days. Fresh and secondary inorganic biomass burning particles increased pollution at Ya'an and Guang'an, respectively, but dominated different stages of pollution in Chengdu. K-nitrate particles were formed by photochemical reactions, whereas K-sulfate particles were formed by both photochemical and liquid-phase reactions. Investigation of the degree of particle aging showed that there were more fresh particles at Ya'an and more aged particles at Guang'an. These results are useful in helping our understanding of the characteristics of biomass burning particles and evaluating their role in PM_2.5 pollution in the Sichuan Basin.     

Observations of atmospheric pollutants at Lhasa during 2014–2015: Pollution status and the influence of meteorological factors

Atmospheric pollutants including SO₂, NO₂, CO, O₃ and inhalable particulate matter (PM_2.5 and PM₁₀) were monitored continuously from March 2014 to February 2015 to investigate characteristics of air pollution at Lhasa, Tibetan Plateau. Species exhibited similar seasonal variations except O₃, with the peaks in winter but low valleys in summer. The maximum O₃ concentration was observed in spring, followed by summer, autumn, and winter. The positive correlation between O₃ and PM₁₀ in spring indicated similar sources of them, and was assumed to be turbulent transport. Temperature was the dominant meteorological factor for most species in spring. High temperature accelerates O₃ photochemistry, and favors air disturbance which is conductive to dust resuspension in spring. Relative humidity (RH) and atmospheric pressure were the main meteorological factors in summer. RH showed negative correlations with species, while atmospheric pressure posed opposite situation. Wind speed (WS) was the dominant meteorological factor in autumn, the negative correlations between WS and species indicated diffusion by wind. Most species showed non-significant correlations with meteorological factors in winter, indicating the dependence of pollution on source emission rather than restriction by meteorology. Pollution weather character indicated that emissions were from biomass burning and dust suspension, and meteorological factors also played an important role. Air stream injection from the stratosphere was observed during O₃ pollution period. Air parcels from Southwest Asia were observed during air pollution period in winter. An enhancement in air pollutants such as O₃ would be expected in the future, more attention should be given to countermeasures for prevention of air pollution in the future.     

生物柴油的研究与应用

生物柴油作为一种可再生能源，可以由动植物油脂通过转酯化反应来制备，它在燃料特性方面与矿物柴油有着十分相似的品质，因此使用生物柴油无须对现有的柴油发动机做任何改造，以生物柴油为燃料的机动车尾气中不含硫氧化物，排出的总颗粒物、总ＨＣ和ＣＯ的量分别是矿物柴油的３０％、４０％和５０％。生物柴油的热效率比矿物柴油高５％～８％，而两者在发动机输出功率上并没有太大的差异。     

Effects of road dust on the growth characteristics of Sophora japonica L. seedlings

Road dust is one of the most common pollutants and causes a series of negative effects on plant physiology. Dust's impacts on plants can be regarded as a combination of load,composition and grain size impacts on plants; however, there is a lack of integrated dust effect studies involving these three aspects. In our study, Sophora japonica seedlings were artificially dusted with road dust collected from the road surface of Beijing so that we could study the impacts of this dust on nitrogen/carbon allocation, biomass allocation and photosynthetic pigments from the three aspects of composition, load and grain size. The results showed that the growth characteristics of S. japonica seedlings were mostly influenced by dust composition and load. Leaf N, root–shoot ratio and chlorophyll a/b were significantly affected by dust composition and load; leaf C/N, shoot biomass, total chlorophyll and carotenoid were significantly affected by dust load; stem N and stem C/N were significantly affected by dust composition; while the dust grain size alone did not affect any of the growth characteristics. Road dust did influence the growth characteristics more extensively than loam. Therefore, a higher dust load could increase the differences between road dust and loam treatments. The elements in dust are well correlated to the shoot N, shoot C/N, and root–shoot ratio of S. japonica seedlings. This knowledge could benefit the management of urban green spaces.     

Emissions from the combustion of eucalypt and pine chips in a fluidized bed reactor

Interest in renewable energy sources has increased in recent years due to environmental concerns about global warming and air pollution,reduced costs and improved efficiency of technologies.Under the European Union(EU)energy directive,biomass is a suitable renewable source.The aim of this study was to experimentally quantify and characterize the emission of particulate matter(PM_(2.5))resulting from the combustion of two biomass fuels(chipped residual biomass from pine and eucalypt),in a pilot-scale bubbling fluidized bed(BFB)combustor under distinct operating conditions.The variables evaluated were the stoichiometry and,in the case of eucalypt,the leaching of the fuel.The CO and PM_(2.5)emission factors were lower when the stoichiometry used in the experiments was higher(0.33±0.1 g CO/kg and 16.8±1.0 mg PM_(2.5)/kg,dry gases).The treatment of the fuel by leaching before its combustion has shown to promote higher PM_(2.5)emissions(55.2±2.5 mg/kg,as burned).Organic and elemental carbon represented 3.1 to 30 wt.% of the particle mass,while carbonate(CO_3~(2-))accounted for between 2.3 and 8.5 wt.%.The particulate mass was mainly composed of inorganic matter(71% to 86% of the PM_(2.5)mass).Compared to residential stoves,BFB combustion generated very high mass fractions of inorganic elements.Chloride was the water soluble ion in higher concentration in the PM_(2.5)emitted by the combustion of eucalypt,while calcium was the dominant water soluble ion in the case of pine.