Accurate DTM generation in sand beaches using mobile mapping

A Mobile Mapping System (MMS) is composed by a set of sensors placed on a mobile platform whose main objective is to obtain attitude and position over time of a referential in the platform together with the image of the objects surrounding the platform. The acquired data allows to obtain georeferenced positions of object points captured by the object sensors. This paper describes a methodology to automatically extract accurate Digital Terrain Models (DTM) of sand beach areas using a Terrestrial Mobile Mapping System (TMMS). The main goal of the presented TMMS is to obtain accurate 3D models of sand beaches. A very important consequence of this will be the abbility to track spatial and temporal changes in coastal geomorphology. The presented methodology has several advantages over more classical approaches: the overall cost, flexibility for regular surveys or at the most convenient epoch, such as after storms. Besides one of the major constraints in Mobile Mapping, that is poor GNSS (Global Navigation Satellite Systems) observation conditions, is usually not present in these areas. The TMMS uses two progressive colour video cameras and can work with any type of direct georeferencing system, which obvoiusly has impact in the final accuracy of the derived DTM. For the results herein reported, a dual frequency GNSS receiver and a low grade type of IMU (Inertial Measurement System) were used. The moving platform where the system was installed is a moto quad. The developed methodology for the DTM generation relies on an automatic choice of terrain points whose three-dimensional coordinates are calculated using a presented image matching technique. A cloud of points obtained in a nearly regular grid pattern is the base for the DTM. The proposed methodology was applied on a sector of the Vila Nova de Gaia Coast, in northern Portugal, and the results presented here show that it is possible with this methodology to produce DTMs with a precision of a few centimetres.     

A quantitative review of the effects of biochar application to soils on crop productivity using meta-analysis

Increased crop yield is a commonly reported benefit of adding biochar to soils. However, experimental results are variable and dependent on the experimental set-up, soil properties and conditions, while causative mechanisms are yet to be fully elucidated. A statistical meta-analysis was undertaken with the aim of evaluating the relationship between biochar and crop productivity (either yield or above-ground biomass). Results showed an overall small, but statistically significant, benefit of biochar application to soils on crop productivity, with a grand mean increase of 10%. However, the mean results for each analysis performed within the meta-analysis covered a wide range (from −28% to 39%). The greatest (positive) effects with regard to soil analyses were seen in acidic (14%) and neutral pH soils (13%), and in soils with a coarse (10%) or medium texture (13%). This suggests that two of the main mechanisms for yield increase may be a liming effect and an improved water holding capacity of the soil, along with improved crop nutrient availability. The greatest positive result was seen in biochar applications at a rate of 100 t ha⁻¹ (39%). Of the biochar feedstocks considered and in relation to crop productivity, poultry litter showed the strongest (significant) positive effect (28%), in contrast to biosolids, which were the only feedstock showing a statistically significant negative effect (−28%). However, many auxiliary data sets (i.e. information concerning co-variables) are incomplete and the full range of relevant soil types, as well as environmental and management conditions are yet to be investigated. Furthermore, only short-term studies limited to periods of 1 to 2 years are currently available. This paper highlights the need for a strategic research effort, to allow elucidation of mechanisms, differentiated by environmental and management factors and to include studies over longer time frames.     

Potential risks of natural mercury levels to wild predator fish in an Amazon reservoir

Mercury (Hg) is a toxic metal that bioaccumulates in aquatic organisms and along food chain. Many studies have reported the problem of mercury exposure in aquatic systems from Amazon basin, but very few have focused on the potential risks to wild fish. The present study reports the bioaccumulation of mercury and alterations in target organs of the predator fish Hoplias malabaricus (traíra) from Samuel reservoir, Amazon basin, Northern Brazil. About 18% of fish had mercury levels in muscle exceeding the safe limit for ingestion through food, established by WHO (0.5 μg Hg g(-1)). Fish were separated in two groups according to mercury bioaccumulation in liver (<0.2 μg Hg g(-1)-group I and >0.2 μg Hg g(-1)-group II) for biomarker comparisons. Catalase activity and number of macrophage centers were statistically higher in group II, confirming the potential of Hg to interfere with redox balance and to recruit defense cells to the liver. Conversely, erythrocyte nuclear alterations were less frequent in group II, indicating a more rigorous selection of erythrocytes or hormesis pattern of response. Glutathione S-transferase activity, lipid peroxidation, and histopathological analyses were not statistically different in the liver and gills of both groups. Comparison of lipid peroxidation levels of these fish with others captured in Southern Brazil during another study and the high incidence of morphological alterations in the liver and gills suggest that the bioaccumulation of mercury during continuous exposure is posing potential risks to the species.     

Coating independent cytotoxicity of citrate- and PEG-coated silver nanoparticles on a human hepatoma cell line

The antibacterial potential of silver nanoparticles(AgNPs) resulted in their increasing incorporation into consumer,industrial and biomedical products.Therefore,human and environmental exposure to AgNPs(either as an engineered product or a contaminant)supports the emergent research on the features conferring them different toxicity profiles.In this study,30 ran AgNPs coated with citrate or poly(ethylene glycol)(PEG) were used to assess the influence of coating on the effects produced on a human hepatoma cell line(HepG2),namely in terms of viability,apoptosis,apoptotic related genes,cell cycle and cyclins gene expression.Both types of coated AgNPs decreased cell proliferation and viability with a similar toxicity profile.At the concentrations used(11 and 5 μg/mL corresponding to IC50 and-IC10 levels,respectively) the amount of cells undergoing apoptosis was not significant and the apoptotic related genes BCL2(anti-apoptotic gene)and BAX(pro-apoptotic gene) were both downregulated.Moreover,both AgNPs affected HepG2 cell cycle progression at the higher concentration(11 μg/mL) by increasing the percentage of cells in S(synthesis phase) and G2(Gap 2 phase) phases.Considering the cell-cycle related genes,the expression of cyclin B1 and cyclin E1 genes were decreased.Thus,this work has shown that citrate- and PEG-coated AgNPs impact on HepG2 apoptotic gene expression,cell cycle dynamics and cyclin regulation in a similar way.More research is needed to determine the properties that confer AgNPs at lower toxicity,since their use has proved helpful in several industrial and biomedical contexts.     

Assessment of DNA damage in Brazilian workers occupationally exposed to pesticides: a study from Central Brazil

We evaluated 41 rural workers occupationally exposed to pesticides and 32 subjects as a control group, using the micronucleus (MN) and the comet assay. For the comet assay, we evaluated the peripheral blood, and for the MN, we sampled cells from the oral epithelium. Damage to DNA was measured by tail length, % DNA in tail (% tail), olive tail moment (OTM), and tail moment (TM). The exposed group presented an 8× increase in MN frequency, when compared to the control group (p <0.05). When we contrasted the MN frequencies between the individuals that use and do not use personal protective equipment, we found a mean of 7.5 MN (57 % variance) and 12.1 MN (130 % variance), respectively. The binucleated cells were 0.04 and 0.005, in the exposed and control groups, respectively, indicating 8× increase in the number of binucleated cells, when comparing the groups (p <0.05). In the comet assay, we demonstrated statistically significant differences in three parameters (% DNA, OTM, and TM) indicating that the rural workers presented high levels of genomic damages. Our results indicate that occupational exposure to pesticides could cause genome damage in somatic cells, representing a potential health risk to Brazilian rural workers that deal constantly with agrochemicals without adequate personal protection equipment.     

A standardized method for assessment of oxidative transformations of brominated phenols in water

The term persistence has been used to confusion since it is used as a conceptual parameter without a uniform definition. Work is therefore being done in order to unite ideas and describe persistence based on the chemical reactivity and chemico-physical properties of compounds via investigation of the main degradation pathways in the environment; photolysis, hydrolysis-substitution-elimination (hse), oxidation, reduction and radical reactions. The present work is focused on developing a method to determine oxidative degradation rates of chemicals and thereby measurement of their susceptibility to undergo oxidation reactions. The method based on potassium permanganate works well for water soluble compounds and is easy, robust, inexpensive and reproducible. By using the method and varying the analysed substances, the degradation rates for brominated phenols, two chlorinated phenols and high volume production compounds such as tetrabromobisphenol A (TBBPA), tetrachlorobisphenol A (TCBPA) and bisphenol A (BPA) have been determined at pH 7.6+/-0.2. The reaction rates of the two halogenated BPA's are particularly fast, giving half-lives in seconds. The other test compounds have slower reaction rates but easily measured under the reaction conditions applied. The reactions are temperature dependent. There is evidence that pK(a) and the substitution pattern of the halogens affects the rate of the reactions. The method is robust and applicable for reaction rate constant measurements of present and potential future environmental contaminants.     

Mercury loss from soils following conversion from forest to pasture in Rondônia, Western Amazon, Brazil

This work reports on the effect of land use change on Hg distribution in Amazon soils. It provides a comparison among Hg concentrations and distribution along soil profiles under different land use categories; primary tropical forest, slashed forest prior to burning, a 1-year silviculture plot planted after 4 years of forest removal and a 5-year-old pasture plot. Mercury concentrations were highest in deeper (60-80 cm) layers in all four plots. Forest soils showed the highest Hg concentrations, ranging from 128 ngg(-1) at the soil surface to 150 ngg(-1) at 60-80 cm of depth. Lower concentrations were found in pasture soils, ranging from 69 ngg(-1) at the topsoil to 135 ngg(-1) at 60-80 cm of depth. Slashed and silviculture soils showed intermediate concentrations. Differences among plots of different soil-use categories decreased with soil depth, being non-significant below 60 cm of depth. Mercury burdens were only statistically significantly different between pasture and forest soils at the topsoil, due to the large variability of concentrations. Consequently, estimated Hg losses were only significant between these two land use categories, and only for the surface layers. Estimated Hg loss due to forest conversion to pasture ranged from 8.5 mgm(-2) to 18.5 mgm(-2), for the first 20 cm of the soil profile. Mercury loss was comparable to loss rates estimated for other Amazon sites and seems to be directly related to Hg concentrations present in soils.     

A habitat‐based approach to predict impacts of marine protected areas on fishers

Although marine protected areas can simultaneously contribute to biodiversity conservation and fisheries management, the global network is biased toward particular ecosystem types because they have been established primarily in an ad hoc fashion. The optimization of trade‐offs between biodiversity benefits and socioeconomic values increases success of protected areas and minimizes enforcement costs in the long run, but it is often neglected in marine spatial planning (MSP). Although the acquisition of spatially explicit socioeconomic data is perceived as a costly or secondary step in MSP, it is critical to account for lost opportunities by people whose activities will be restricted, especially fishers. We developed an easily reproduced habitat‐based approach to estimate the spatial distribution of opportunity cost to fishers in data‐poor regions. We assumed the most accessible areas have higher economic and conservation values than less accessible areas and their designation as no‐take zones represents a loss of fishing opportunities. We estimated potential distribution of fishing resources from bathymetric ranges and benthic habitat distribution and the relative importance of the different resources for each port of total catches, revenues, and stakeholder perception. In our model, we combined different cost layers to produce a comprehensive cost layer so that we could evaluate of trade‐offs. Our approach directly supports conservation planning, can be applied generally, and is expected to facilitate stakeholder input and community acceptance of conservation.     

Modeling the dynamics of DDT in a remote tropical floodplain: indications of post-ban use?

Significant knowledge gaps exist regarding the fate and transport of persistent organic pollutants like dichlorodiphenyltrichloroethane (DDT) in tropical environments. In Brazil, indoor residual spraying with DDT to combat malaria and leishmaniasis began in the 1950s and was banned in 1998. Nonetheless, high concentrations of DDT and its metabolites were recently detected in human breast milk in the community of Lake Puruzinho in the Brazilian Amazon. In this work, we couple analysis of soils and sediments from 2005 to 2014 at Puruzinho with a novel dynamic floodplain model to investigate the movement and distribution of DDT and its transformation products (dichlorodiphenyldichloroethylene (DDE) and dichlorodiphenyldichloroethane (DDD)) and implications for human exposure. The model results are in good agreement with the accumulation pattern observed in the measurements, in which DDT, DDE, and DDD (collectively, DDX) accumulate primarily in upland soils and sediments. However, a significant increase was observed in DDX concentrations in soil samples from 2005 to 2014, coupled with a decrease of DDT/DDE ratios, which do not agree with model results assuming a post-ban regime. These observations strongly suggest recent use. We used the model to investigate possible re-emissions after the ban through two scenarios: one assuming DDT use for IRS and the other assuming use against termites and leishmaniasis. Median DDX concentrations and p,p′-DDT/p,p′-DDE ratios from both of these scenarios agreed with measurements in soils, suggesting that the soil parameterization in our model was appropriate. Measured DDX concentrations in sediments were between the two re-emission scenarios. Therefore, both soil and sediment comparisons suggest re-emissions indeed occurred between 2005 and 2014, but additional measurements would be needed to better understand the actual re-emission patterns. Monte Carlo analysis revealed model predictions for sediments were very sensitive to highly uncertain parameters associated with DDT degradation and partitioning. With this model as a tool for understanding inter-media cycling, additional research to refine these parameters would improve our understanding of DDX fate and transport in tropical sediments.