Globaler und regionaler Klimawandel

The interdependences between climate and humanity are becoming increasingly apparent, which makes climatology an upto-date and strongly discussed subject. Its task is to identify and examine relatively long-term, regional and global, natural and anthropogenic developments. A global, long-term view reveals a striking increase of surfacenear air temperature since the beginning of the industrial age. On a regional scale, trends differ considerably, but also Germany shows an apparent trend of increasing temperature and precipitation. The development of extreme events is more difficult to judge; the heat summer of 2003 in Europe, however, is among the phenomena that are likely to occur more frequently in the future. The influence of different natural and anthropogenic factors on the climate is expressed, amongst others, through their radiative forcings. Greenhouse gases emitted from anthropogenic activities are of particular significance since their concentration in the atmosphere keeps increasing. Mathematical modeling has made it possible to reconstruct the climate development of the past with increasing precision. The currently observed warming can only be comprehended by assuming anthropogenic influences. For the future development different scenarios have been calculated in order to deduce strategies for necessary action.     

The effect of nitrogen deficiency,methionine and inhibitors of methionine metabolism on the DMSP contents of Tetraselmis subcordiformis (Stein)

The unicellular alga Tetraselmis (Platymonas) subcordiformis (Prasinophyceae) displayed a two-phase increase in DMSP (dimethylsulfoniopropionate) contents in response to nitrogen deficiency. In the first phase, DMSP pools increased by 75% within 24 h. The second increase in DMSP was observed after 14 d and was accompanied by cyst formation. Methionine metabolism was involved in DMSP accumulation. A 2.6-fold increase of the DMSP pool could be induced by supplementing a complete ASP (artifical seawater Provasoli) medium with 100 M L-methionine. Inhibition of methionine utilization by T. subcordiformis caused by the addition of S-adenosylhomocystein, a competitive inhibitor of S-adenosylmethionine-dependent transmethylases, resulted in a 24% increase of DMSP contents after 7 h. DMSP accumulation after hyperosmotic shock was significantly delayed when methionine liberation from proteins was inhibited by a set of protease inhibitors. A model for the mechanism of DMSP accumulation is presented on the basis of these data and additional information from the literature. It is proposed that methionine availability in T. subcordiformis determines the rate of DMSP synthesis.     

Critical loads for Finnish lakes: comparison of three steady-state models

Three simple steady-state water-chemistry models are used to calculate critical loads of sulfur for lakes in Finland. Because of the high concentrations of organic matter in Finnish lakes, the influence of organic anions on the calculation of critical loads has been given special attention. The first two methods are well known ion-balance methods which have been used in many previous lake-acidification studies. The third method, developed for this study, includes the numerical solution of equilibrium equations for organic anions, inorganic carbon species and inorganic monomeric aluminum. The original pH and aluminum concentration of the lakes are estimated with this model, and a method to estimate the original acid neutralizing capacity (ANC) by simulating a Gran-titration is also tested on the lake data. Uncertainty in the predictions is estimated by varying the most critical model parameters.     

The aggregation pheromone ofIps duplicatus and its role in competitive interactions withI. typographus (Coleoptera: Scolytidae)

Summary Ips duplicatus withI. typographus co-inhabiting Norway spruce (Picea abies (L.) Karst.) would benefit from a pheromone blend distinct from that of the larger competitorI. typographus. GC-MS analysis showed thatI. duplicatus males feeding in the host produced ipsdienol (Id),cis-verbenol (cV),trans-verbenol (tV), myrtenol (Mt), andE-myrcenol (EM) and traces of 2-methyl-3-buten-2-ol (MB).I. duplicatus produced Id in approximately racemic form (48.9-54.5% (+)-(S)-isomer). The amounts of Id and EM released over a 9 day period had a maximum of 250 and 5 ng/h/male, respectively, on day 2. Exposure ofI. duplicatus males to myrcene and -pinene resulted in the production of small amounts of Id, cV, tV, Mt, andtrans-pinocarveol, but not of EM. In laboratory bioassays with walking beetles, the pheromone component Id alone was weakly attractive while EM was inactive, but in binary combination with Id strongly synergized attraction. A combination of EM and Id at a release rate equivalent to 100–200 males was more attractive in the field than 70 unmated males in a spruce log. The addition of myrcene ( a suggested pheromone precursor of Id) to Id did not enhance trap caches, while addition of EM increased catches > 10-fold. Subtracting EM from a blend of Id, EM, cV and MB drastically reduced trap catches while subtraction of cV or MB or both had no significant effect. Addition of EM over a wide concentration range to the synthetic pheromone ofI. typographus did not reduce the attraction of females of this species in the laboratory. A two-species pheromone interaction field test releasingI. typographus pheromone components (MB + cV) at 10–1000 male equivalents (ME) andI. duplicatus pheromone (Id + EM) at 0, 10–1000 ME in all possible combinations showed both positive intraspecific dose-response effects and an interspecific inhibition. Higher release rates of EM appeared to inhibitI. typographus, especially males. In a tree colonization model, the response of the two competing species to their respective pheromones show a good separation during the mass-attack with a small initial cross-attraction. It remains to be shown whether either of the two pheromone systems have in fact evolved in the present sympatry, or if they are an incidental effect of ancestry of these phylogenetically distantIps.     

Orientation ofRhizophagus grandis (Coleoptera: Rhizophagidae) to oxygenated monoterpenes in a species-specific predator-prey relationship

Summary The predator,Rhizophagus grandis, is linked to its specific prey,Dendroctonus micans, by semiochemical signals regulating oviposition and long range orientation. A mixture of simple oxygenated monoterpenes [(–)—fenchone, (–)—pinocamphone, rac. camphor, terpinene-4-ol, borneol, fenchol and verbenone], identified from the frass ofD. micans has been found to be extremely active in a flight windtunnel as a long—range attractant for the predator. The mixture elicited 84 % of the response to larval frass of the prey. Excluding pinocamphone from the mixture did not influence its activity. Also, changing the absolute configurations of some of the components (fenchol, terpinene-4-ol and borneol) did not influence the predators' response. However, the addition of (–)—-terpineol increased the attractivity of the synthetic blend to almost that of larval frass of the prey. Ecological implications of the identified semiochemicals and their use in pest management are discussed.     

Reversibility of stemflow-induced soil acidification in Swedish beech forest

Stemwater running down the trunks of beech (Fagus sylvatica L.) has an acidifying effect on soil near the stem. The deposition of acidifying substances may be two to four times higher close to the stem compared to in the stand in general. To study reversibility of soil acidification, 72 stumps of beech trees were chosen from five different year classes of felling (3, 6, 9, 14-15, 25-30), representing the years when stemflow ceased to affect the soil. The H(+) concentration (pH KCl) in the topsoil (0-5 cm) differed between the distances 10-30 cm and 230-250 cm from the stumps, the soil close to the stem being more acid. The longer the time since felling the smaller the differences in H(+) concentration became. This reduction in soil acidity amounted to ca. 50% after 15 years, and only small further changes occurred over the next ten years. This indicates that soil may not recover fully from acidification, or does so at a rather slow rate after the initial 15 years of recovery.     

Reduction and avoidance of lubricant mist demands an integrated assessment approach

A case study to identify major factors for lubricant mist exposure covered 15 metal machining sites. The investigation included milling, turning, drilling and grinding applications. Systematic analysis considered all relevant data concerning the machine tool, the lubricant and the suction plant. The efficiency of the implemented maintenance program at the installed filter systems was checked by concentration measurements immediately before and after service. All performed measurements of lubricant aerosol and vapor loads upstream and downstream of the installed filter systems were carried out according to VDI 2066 and BIA 3110, respectively. The selection criteria for the sites to be investigated, the systematic nature of the data acquisition and the procedure of the analysis are demonstrated in detail by performing comparisons between selected applications using emulsions and those employing straight oil for lubrication. The results of the study identify recirculation of ventilated air as the major source of workplace exposure to airborne lubricant emissions. More than 60% of the demisters investigated emit air at total lubricant loads (aerosols and vapor) above the limit of 20 mg m-3 at any time of operation; which also means immediately after service. A common reason for exceeded aerosol loads in recirculated air is e.g. the fact that the type of filter system applied is often not suitable for the separation problem. Loads of lubricant vapor are usually higher at the processes which use water emulsions as lubricant. In a quarter of the cases the limits were exceeded solely due to high vapor loads even immediately after service. The exposure can be reduced by replacing the lubricant, installation of a vapor separation plant or avoiding air recirculation. Maintenance time of the demisting system and aerosol separation efficiency of state-of-the-art demisting systems can be expanded by implementation of enhanced preliminary filter stages. This study confirms that appropriate service measures lower both aerosol emissions and lubricant vapor concentrations due to the reduction of exposed oil-wetted surfaces. The performed measurements show no significant relationship between loads of airborne lubricants and the type of machining process. Therefore, investigations at a much more detailed level have to be performed. However, the individual assessment of any workplace due to the complex situation remains essential.     

Quantification of protein adducts of hexahydrophthalic anhydride and methylhexahydrophthalic anhydride in human plasma

Hexahydrophthalic anhydride (HHPA) and methylhexahydrophthalic anhydride (MHHPA) are two highly allergenic compounds used in the chemical industry. A method was developed for quantification of protein adducts of HHPA and MHHPA in human plasma. The plasma was dialysed and the anhydrides were hydrolysed from the proteins at mild acidic conditions. The released hexahydrophthalic acid (HHP acid) and methylhexahydrophthalic acid (MHHP acid) were purified by reversed solid phase extraction followed by derivatisation with pentafluorobenzyl bromide. The derivatives were analysed using GC-MS in negative ion chemical ionisation mode with ammonia as moderating gas. As internal standards, deuterium labelled HHP and MHHP acids were used. The detection limits were 0.06 pmol mL(-1) plasma for HHP acid and 0.03 pmol mL(-1) plasma for MHHP acid. The between-day precisions for HHP acid were 18% at 0.3 pmol mL(-1) and 8% at 4 pmol mL(-1). For MHHP acid, the precisions were 13% at 0.3 pmol mL(-1) and 9% at 4 pmol mL(-1). There were strong correlations (r=0.94 for HHPA and 0.99 for MHHPA) between total plasma protein adduct concentrations and serum albumin adduct levels. Workers exposed to time-weighted average air levels of HHPA between < 1 and 340 microg m(-3) and between 2 and 160 microg m(-3) for MHHPA had plasma adduct levels between the detection limits of the methods and 8.40 and 19.0 pmol mL(-1), respectively.     

Development and validation of methods for environmental monitoring of cyclophosphamide in workplaces

Methods to monitor contamination of workplaces with antineoplastic drugs have been developed and validated. Cyclophosphamide (CP) was used as a model compound as it is one of the most commonly used antineoplastic drugs. A wipe sampling method to detect contamination with CP at surfaces was developed. A personal air sampling method to sample gas and vapour on solid sorbent tubes and particles with filters was also developed. Wipe and filter samples were extracted and sorbent samples were eluted, all with ethyl acetate. The samples were analysed with liquid chromatography tandem mass spectrometry. (2)H(6)-labelled cyclophosphamide was used as an internal standard. The between-day precision was 2-5% for wipe samples, 4-6% for sorbent samples and 3-8% for filter samples. The limit of detection was 0.02 ng CP per sample for the wipe and filter methods and 0.03 ng CP per sample for the solid sorbent method. Wipe sampling on surfaces made of different materials resulted in mean recoveries between 78-106%. The desorption recovery was between 97-102% for the wipe samples, 97% for the sorbent samples and 101% for the filter samples. Samples were stable for up to 2 months at 5 degrees C and -20 degrees C and for about 2 d at room temperature. The developed methods were applied to the measurement of contamination with CP in a hospital pharmacy. Trace amounts of CP, 1.3 and 1.4 ng, were detected on surfaces in the pharmacy.