Storm water contamination and its effect on the quality of urban surface waters

We studied the effect of storm water drained by the sewerage system and discharged into a river and a small reservoir, on the example of five catchments located within the boundaries of the city of Poznań (Poland). These catchments differed both in terms of their surface area and land use (single- and multi-family housing, industrial areas). The aim of the analyses was to explain to what extent pollutants found in storm water runoff from the studied catchments affected the quality of surface waters and whether it threatened the aquatic organisms. Only some of the 14 studied variables and 22 chemical elements were important for the water quality of the river, i.e., pH, TSS, rain intensity, temperature, conductivity, dissolved oxygen, organic matter content, Al, Cu, Pb, Zn, Fe, Cd, Ni, Se, and Tl. The most serious threat to biota in the receiver came from the copper contamination of storm water runoff. Of all samples below the sewerage outflow, 74 % exceeded the mean acute value for Daphnia species. Some of them exceeded safe concentrations for other aquatic organisms. Only the outlet from the industrial area with the highest impervious surface had a substantial influence on the water quality of the river. A reservoir situated in the river course had an important influence on the elimination of storm water pollution, despite the very short residence time of its water.     

Spatial and seasonal variability of pore water phosphorus concentration in shallow Lake Swarzędzkie,Poland

Pore waters play an important role in phosphorus dynamics in aquatic ecosystems. Phosphorus concentrations in pore waters are much higher than above the bottom. This is confirmed by the results of this study concerning the hypereutrophic lake. Pore water was analyzed at 11 sampling stations in the upper layer of bottom sediments. This water was separated by centrifugation and phosphorus level was measured spectrophotometrically with ascorbic acid as a reducer. Total phosphorus concentration in pore waters ranged from 0.5 to 8.1 mgP l^− 1 (mean 3.2 mgP l^− 1). Mean phosphorus concentration in pore water samples of this lake was the highest in summer and the lowest in winter. High concentrations were observed in samples from the pelagial and low from the macrophyte zone.     

Theoretical Analysis of Percussive Tests of Products

The goal of theoretical research is to establish parameters, which have to be given in standards for percussive tests of products. Those parameters are essential for each user to be able to construct identical (equivalent) testing equipment. This would ensure identical results for identical products.

The paper presents a detailed analysis of the distribution and the value of the forces generated during percussive collisions of two bodies. Elastic, plastic, and elastoplastic collisions are considered. Parameters determining the coefficient of restitution, the courses of energy, momenta, and the values of the forces in colliding elements are determined. The dynamic force acting on a product during a percussive test was studied.     

Effect of Polonite used for phosphorus removal from wastewater on soil properties and fertility of a mountain meadow

Reactive filter materials used for phosphorus (P) removal from wastewater can be disposed of as soil amendments after treatment, thus recycling P and other macro- and micro-nutrients to plants. In addition, materials with a high pH and Ca content, such as Polonite, are potential soil conditioners, which can be particularly beneficial for acid soils. Polonite previously used for on-site wastewater treatment was applied as a soil amendment to a mountain meadow. The amendment significantly increased soil pH and decreased the hydrolytic acidity, thus reducing Al toxicity risks. The effects were comparable to those of liming. No difference in yield and P uptake by meadow plants was observed. The uptake of metals was lower for amended soils, especially the uptake of Mn. Using Polonite after wastewater treatment as a soil amendment is thus a viable disposal alternative that can replace liming, when necessary, being capable of recycling P and other nutrients to meadow plants.     

Morphological adaptation of a planktonic diatom to growth in Antarctic sea ice

Chaetoceros dichaeta Ehrenberg is one of the most important planktonic diatom species in the Southern Ocean, making a significant contribution to the total biomass in the region. Our observations on both field and culture material have revealed the existence of a specialized form of C. dichaeta adapted to living in sea ice. This sea ice form differs from the planktonic form by the shape and orientation of the setae and the aperture length between sibling cells. Thus, the diameter of the chain is equivalent to the apical axes of the cells and is accompanied by a two order of magnitude decrease in minimal space requirement. Here, we report for the first time on the extraordinary overwintering strategy of a planktonic diatom in sea ice facilitated by its rapid morphological adaptation to changing environmental conditions. This morphological plasticity enables it to thrive in the confined space of the sea ice brine matrix and retain its numerical dominance in recurrent growing seasons and has likely evolved to optimally exploit the dynamic ecosystem of the seasonally ice-covered seas of the Southern Ocean.     

The influence of restoration measures on phosphorus internal loading from the sediments of a hypereutrophic lake

Environmental Science and Pollution Research - Uzarzewskie Lake was a hypereutrophic, dimictic lake characterized by low water transparency, high chlorophyll-a concentration and intense...     

Analysis of selected fungi variation and its dependence on season and mountain range in southern Poland—key factors in drawing up trial guidelines for aeromycological monitoring

The aim of the study was to identify fungal spores, in particular plant pathogenic fungi, occurring in the air in selected mountain ranges. The results revealed not only the array of fungal species migrating with air currents from the Czech Republic and Slovakia but also how the season of the year affects the distribution of spores. Such studies may lay a foundation for future aeromycological monitoring, in accordance with the requirements for integrated plant protection. Aeromycological research was carried out between 2013 and 2016 at 3-month intervals in mountainous areas along the southern borders of Poland: the Bieszczady, the Pieniny, the Giant Mountains (Karkonosze) and the Babia Góra Massif. The research relied on impact method employing Air Ideal 3P sampler, which, by drawing in atmospheric air, also collects fungal spores. Regardless of altitudinal zonation, the changing weather conditions appeared to be the main reason for the variations in the number of the fungal spores under study in those years.     

The Damping of Off-Central Impact for Selected Industrial Safety Helmets Used in Poland

The paper presents a review of head injury criteria and determines an assessment criterion for test results. Parameters characterizing the protection properties of off-central impacted industrial helmets are chosen and the test stands used in the Central Institute for Labour Protection to test those parameters are presented. The idea of damping 2 selected industrial helmets used in Poland is discussed. The test results of the parameters characterizing the protection properties are compared for damped and not damped helmets.     

Study on the determination of PCDDs/Fs and HCB in exhaust gas

The subject of this study was to develop a method of simultaneous determination of PCDDs/PCDFs and HCB in exhaust gases from industrial installations. Sampling to determine PCDDs/PCDFs was conducted using the method described in PN-EN 1948-1: 2006, where the sorption material is polyurethane foam (PUF). In order to simultaneously collect PCDDs/PCDFs and HCB and to avoid sorbent bed breakthrough, it was necessary to apply an additional polyurethane sorption layer. Twenty-seven samples of exhaust gases from various cement plants and 40 samples of exhaust gases from hospital and industrial waste incineration plants collected in 2009/2010 in the entire territory of Poland were examined. The average content of PCDDs/Fs in samples from cement plants amounted to 0.076 ng I-TEQ N m(-3) (range of 0.002-0.62 ng I-TEQ N m(-3)), while the average content of HCB amounted to 10 ng N m(-3) (range of 0.98-60.5 ng N m(-3)). In the case of samples collected from waste incineration plants, the average concentration of PCDDs/Fs was 0.39 ng I-TEQN m(-3) (range of 0.002-5.68 ng I-TEQ N m(-3)). In the case of HCB, the average concentration was 238 ng N m(-3) (range of 3.21-2500 ng N m(-3)). Also, the interdependence of the concentration of PCDDs/PCDFs and HCB was determined in the analysed samples, with the ranges of low and high content of PCDDs/PCDFs being examined separately. In all cases, the determined values of the r correlation coefficient were within the range of 0.7-1.0, which indicates a good correlation between the concentrations of PCDDs/PCDFs and HCB.