Persistence of two neonicotinoid insecticides in wastewater, and in aqueous solutions of surfactants and dissolved organic matter

Wastewater treatment plants receive organic contaminants, such as pesticides, which reach the sewage system from domestic, industrial or agricultural activities. In wastewater, which is a complex mixture of organic and inorganic compounds, biotic or abiotic degradation of contaminants can be affected by the presence of co-solutes. The photodecomposition in natural sunlight of two neonicotinoid insecticides, thiamethoxam and thiacloprid, was investigated in wastewater, aqueous extracts of sewage sludge and in aqueous surfactant solutions, which are abundant in wastewater. Dissipation in the dark was also studied in wastewater, due to reduction of transmitted sunlight in wastewater ponds. With regard to photolysis, thiamethoxam degraded rapidly in all the aqueous solutions. Among them sewage sludge extracts slightly modified (average half-life 17.6 h), wastewater increased (13.7 h) and non-ionic surfactants led, as a family, to the highest dissipation rates (average 6.2 h), with respect to control water (18.7 h). Additionally this pesticide also underwent a slower biodegradation process in wastewater in the dark under anaerobic conditions (around 25 d). A metabolite of thiamethoxam from the biological decomposition in wastewater was identified by HPLC/MS. On the other hand thiacloprid was found to be resistant to photo- and biodecomposition and remained almost unchanged during the experimental periods in all the tested media.     

The application of a mulch biofilm barrier for surfactant enhanced polycyclic aromatic hydrocarbon bioremediation

Lab scale mulch biofilm barriers were constructed and tested to evaluate their performance for preventing the migration of aqueous and surfactant solubilized PAHs. The spatial distribution of viable PAH degrader populations and resultant biofilm formation were also monitored to evaluate the performance of the biobarrier and the prolonged surfactant effect on the PAH degrading microorganism consortia in the biobarrier. Sorption and biodegradation of PAHs resulted in stable operation of the system for dissolved phenanthrene and pyrene during 150 days of experimentation. The nonionic surfactant could increase the solubility of phenanthrene and pyrene significantly. However, the biobarrier itself couldn't totally prevent the migration of micellar solubilized phenanthrene and pyrene. The presence of surfactant and the resultant highly increased phenanthrene or pyrene concentration didn't appear to cause toxic effects on the attached biofilm in the biobarrier. However, the presence of surfactant did change the structural composition of the biofilm.     

Metribuzin impairs the unicell-colony transformation in the green alga Scenedesmus obliquus

Active growth is a prerequisite for the formation of grazing-protective, mostly eight-celled colonies by the ubiquitous green alga Scenedesmus in response to chemical cues from zooplankton. Colonies can also be evoked by chemically quite similar manmade anionic surfactants, such as FFD-6. In this study, it was hypothesized that growth-inhibiting concentrations of the herbicide metribuzin impair the ability of Scenedesmus obliquus to form colonies in response to the surfactant morphogen FFD-6. The results confirmed that the formation of colonies in S. obliquus was hampered by metribuzin. EC₅₀ values of metribuzin for colony inhibition (approximately 11 μg L⁻¹) were similar to those for growth and photosynthesis inhibition (12-25 μg metribuzin L⁻¹). In the absence of the colony-inducing surfactant FFD-6, S. obliquus populations were comprised of 92% unicells, having on average 1.2 cells per colony at all tested metribuzin concentrations (0-100 μg L⁻¹). In contrast, in the presence of FFD-6 and at low metribuzin concentrations (0 and 5 μg L⁻¹), S. obliquus had more than five cells per colony with a high portion of eight-celled colonies. However, increasing concentrations of metribuzin decreased the number of colonies in the FFD-6-exposed populations and caused them to remain mostly unicellular at the highest concentrations (50 and 100 μg L⁻¹). This study revealed that metribuzin impeded growth and by doing so, also obstructed the possibility for unicellular Scenedesmus to form colonies. Consequently, an increase in mortality of Scenedesmus from grazing is expected.     

表面活性剂对以污泥为铝源制得的纳米Al（OH）3性质的影响研究

以污泥碳(SC)中回收的铝酸钠为铝源,在制备Al(OH)3的过程中加入表面活性剂PEG-1000(比例在0.01%~0.6%变化),考察其对Al(OH)3表面形貌和结构的影响.研究发现,当加入PEG-1000比例较小时,其空间位阻作用抑制了粒子之间的键合作用,使得Al(OH)3的沉淀效率较高、粒子尺寸较小,也能有效地阻止颗粒的团聚,SBET可以达到340 m2·g-1以上.当PEG-1000加入比例较大时,Al3+的沉淀效率逐渐降低,所得Al(OH)3粒子的尺寸变大,Al(OH)3的SBET和孔体积逐渐变小,平均孔径变大;原因是增多的PEG-1000分子会被包进Al(OH)3的结构中,限制了PEG-1000的表面交联和吸附,使空间位阻效应变差.—CH2—振动峰的出现说明PEG-1000是通过形成化学键的方式连接在Al(OH)3的表面基团上.PEG-1000的使用对于以污泥为铝源制备分散性好、尺寸较小和SBET较大的非晶态Al(OH)3具有重要作用.     

Influence of dispersants on bioconcentration factors of seven organic compounds with different lipophilicities and structures

Seven compounds with different lipophilicities and structures—1,3,5-trichlorobenzene, pentachlorobenzene, acenaphthylene, 1,4-dimethyl-2-(1-methylphenyl)benzene, 4-ethylbiphenyl, 4,4′-dibromobiphenyl, and 1,1,1-trichloro-2,2-bis(4-chlorophenyl)ethane—were subjected to bioconcentration tests in carp at concentrations below the water solubilities of the compounds in the presence or absence of a dispersant (either an organic solvent or a surfactant). The bioconcentration factors (BCFs) of the compounds were on the order of 10²–10⁴. The BCF values remained in the range of 15–49% for all the compounds, whether or not a dispersant was present, i.e., the BCF values in the presence of an organic solvent or a surfactant at a concentration below the critical micelle concentration were not significantly smaller than the BCF values in the absence of the solvent or surfactant. This result indicates that the dispersants had no influence on the evaluation of the bioconcentration potential of these test substances.     

Effect of the water–oil ratio on brine/surfactant/alcohol/oil systems optimized for soil remediation

The optimum middle-phase microemulsion used for remediation of oily contaminated soils is often obtained by mixing a certain amount of a surfactant/alcohol mixture with oil and adjusting the salinity concentrations at a constant water–oil ratio. Upon introduction to the subsurface, however, the system may not be in the optimum state throughout the remediation process owing to the change in the water–oil ratio. This research has attempted to investigate the effect of the water–oil ratio on the phase behavior of systems containing brine, anionic surfactant, alcohols, and different oils. By systematically changing the water–oil ratio, while keeping the others variables constant, the systems exhibited different phase behavior. The results revealed that the effect of the water–oil ratio on system behavior was significant, and analogous to that of salinity. Increasing the water–oil ratio led the system change from winsor I → winsor III → winsor II. The greater the water–oil ratio the lower the salinity required to produce the middle-phase microemulsion, but the narrower the salinity range of the three-phase region. An empirical correlation has been developed in order to predict the changes in phase behavior with the changes in water–oil ratio. This provides a useful tool for designing optimum formulations suitable for soil remediation. Received: October 5, 1999 / Accepted: March 27, 2000     

无机酸处理碱洗污水工艺的研究

介绍一种用无机酸处理碱洗污水的工艺过程。经小试、中试试验表明 ,该工艺处理后的污水含油和 COD的脱除率均达 95 %以上     

软煤层综放工作面注水防尘中的工艺问题

以现场注水试验和实验室实验结果为依据,分析并讨论了目前研究甚少而又对注水防尘实施,特别是在软煤层综放工作面实施很重要的工艺问题,提出了适宜的钻孔、封孔、润湿效果考察方法以及表面活性剂应用中的浓度选择、种类选择和应用的必要性评价方法     

在PVA_(124)─TritonX-100协同作用下Ag~+─邻菲啰啉─溴邻苯三酚红体系显色反应研究及应用

在PVA124－TritonX－100协同作用HAc-NaAc缓冲体系（pH6.5）中,Ag+与邻菲罗林-溴邻笨三酚红形成2：4：1紫红色三元络合物,其λmax=620nm,ε620＝7.0×104,Ag+浓度在0~14μg／25ml内遵循比耳定律。方法用于漂定液中微量银的测定,结果满意。     

Refinement of the density-modified displacement method for efficient treatment of tetrachloroethene source zones

A novel method to remediate dense nonaqueous phase liquid (DNAPL) source zones that incorporates in situ density conversion of DNAPL via alcohol partitioning followed by displacement with a low interfacial tension (IFT) surfactant flood has been developed. Previous studies demonstrated the ability of the density-modified displacement (DMD) method to recover chlorobenzene (CB) and trichloroethene (TCE) from heterogeneous porous media without downward migration of the dissolved plume or free product. However, the extent of alcohol (n-butanol) partitioning required for in situ density conversion of high-density NAPLs, such as tetrachloroethene (PCE), could limit the utility of the DMD method. Hence, the objective of this study was to compare the efficacy of two n-butanol delivery approaches: an aqueous solution of 6% (wt) n-butanol and a surfactant-stabilized macroemulsion containing 15% (vol) n-butanol in water, to achieve density reduction of PCE-NAPL in two-dimensional (2-D) aquifer cells. Results of liquid-liquid equilibrium studies indicated that density conversion of PCE relative to water occurred at an n-butanol mole fraction of 0.56, equivalent to approximately 5 ml n-butanol per 1 ml of PCE when in equilibrium with an aqueous solution. In 2-D aquifer cell studies, density conversion of PCE was realized using both n-butanol preflood solutions, with effluent NAPL samples exhibiting density reductions ranging from 0.51 to 0.70 g/ml. Although the overall PCE mass recoveries were similar (91% and 93%) regardless of the n-butanol delivery method, the surfactant-stabilized macroemulsion preflood removed approximately 50% of the PCE mass. In addition, only 1.2 pore volumes of the macroemulsion solution were required to achieve in situ density conversion of PCE, compared to 6.4 pore volumes of the 6% (wt) n-butanol solution. These findings demonstrate that use of the DMD method with a surfactant-stabilized macroemulsion containing n-butanol holds promise as an effective source zone remediation technology, allowing for efficient recovery of PCE-DNAPL while mitigating downward migration of the dissolved plume and free product.