膜生物反应器中膜分离单元运行参数优化试验

用生活杂排水对膜生物反应器中膜分离单元的运行参数进行了优化试验研究，膜分离单元采用中空纤维超滤膜，试验表明，在适宜的反冲洗和化学清洗条件下，膜的透水率可及时、有效地恢复，使膜生物反应器能长期稳定地运行。     

天然沸石对溶液中氨氮吸附特性的研究

为了探讨天然沸石对NH4 的吸附规律,以浙江缙云出产的粒径为2~3.2mm的天然斜发沸石为实验材料,进行吸附等温线实验和吸附动力学实验。结果表明,实验沸石对NH4 的吸附等温线符合Langmuir公式,且对氨氮吸附量的极限值为1.624mol·kg-1;实验沸石对NH4 的吸附反应符合一级动力学方程,反应速率常数为0.1882h-1。通过监测溶液中各阳离子浓度的变化,可确定沸石晶体内与NH4 进行交换的主要离子为Ca2 和Na ,二者占交换总量的96%以上;在交换反应初期,出现了由于沸石晶体中的离子在固液两相中的再分配所造成的离子交换的不等量现象。     

聚能罩挤压成形工艺研究

介绍聚能罩挤压成形的工艺过程、变形特点,分析了挤压件尺寸精度的变化规律以及变形程度与机械性能的关系.     

壳聚糖对染料的吸附动力学研究

通过壳聚糖吸附酸性染料普拉蓝RAWL和阳离子蓝染料X-GRRL的试验，研究了壳聚糖对这两种水溶性染料吸附的动力学行为，包括吸附速率K和颗粒内有效扩散系数Di′，同时通过对吸附焓△H的试验计算，初步分析了它们的吸附机理。     

UV强化草酸络合Fe2+活化过硫酸盐氧化苯胺研究

采用UV强化草酸络合Fe2+活化过硫酸钠(PS)氧化降解苯胺,研究了UV光照促进苯胺降解的作用机制,考察了pH、草酸浓度和UV光照强度对PS活化及苯胺降解的影响.结果表明,引入UV光照后,草酸络合Fe2+活化PS体系中的PS活化率和苯胺降解率分别提高了68%和41%.在该过程中,UV可通过光解或光电离水分子产生·OH、促进发生光化学Fenton反应、直接活化PS等作用机制降解苯胺,但通过光化学反应促进Fe2+循环转化是提高PS持续活化效果和苯胺去除的首要作用机制;中碱性及强酸性环境因不利于Fe(C2O4)3-3形成,会对PS活化过程产生抑制,但当初始pH为7和9时,由于PS活化分解促进反应体系pH下降,PS活化及苯胺降解均取得较好效果;草酸浓度的增加有利于PS活化,但当草酸浓度高于2.5 mmol·L~(-1)时,会对SO·-4产生强烈竞争,导致苯胺降解率出现下降;增加UV光照强度能显著促进PS活化和苯胺氧化去除,当UV光照强度达到117μW·cm-2时,反应150 min后,PS的分解率和苯胺的去除率均可达到100%.     

Temporal and spatial changes of microbial community in an industrial effluent receiving area in Hangzhou Bay

Anthropogenic activities usually contaminate water environments, and have led to the eutrophication of many estuaries and shifts in microbial communities. In this study, the temporal and spatial changes of the microbial community in an industrial effluent receiving area in Hangzhou Bay were investigated by 454 pyrosequencing. The bacterial community showed higher richness and biodiversity than the archaeal community in all sediments. Proteobacteria dominated in the bacterial communities of all the samples; Marine_Group_Ⅰ and Methanomicrobia were the two dominant archaeal classes in the effluent receiving area. PCoA and AMOVA revealed strong seasonal but minor spatial changes in both bacterial and archaeal communities in the sediments. The seasonal changes of the bacterial community were less significant than those of the archaeal community, which mainly consisted of fluctuations in abundance of a large proportion of longstanding species rather than the appearance and disappearance of major archaeal species. Temperature was found to positively correlate with the dominant bacteria, Betaproteobacteria, and negatively correlate with the dominant archaea,Marine_Group_Ⅰ; and might be the primary driving force for the seasonal variation of the microbial community.     

宜宾市规划中心城区工程建设地质环境适宜性综合评价

根据宜宾市规划中心城区的地质环境特征,建立了由地形地貌、水文、工程地质、水文地质、不良地质作用和地质灾害、活动断裂和地震效应6个评价要素和19个评价因子构成的多层次工程建设地质环境适宜性评价指标体系,采用层次分析法确定了评价指标的权重,并采用基于评价单元的多因子分级加权指数法评价模型,利用GIS空间分析技术对宜宾市规划中心城区工程建设地质环境适宜性进行了综合评价,对工程建设地质环境适宜性与建设规划的协调性进行了分析。结果表明:宜宾市规划中心城区工程建设地质环境适宜区占研究区总面积的25.78%,较适宜区占29.01%,适宜性差区占18.03%,不适宜区占23.04%,适宜和较适宜的地区可满足近期城市规划用地需求;规划中心城区用地规划整体比较合理,现有和规划建设用地的工程建设地质环境适宜性主要为适宜和较适宜。该评价结果可为宜宾市城市规划、工程建设选址、重大基础设施建设规划及土地利用优化布局提供科学依据,同时对完善工程建设地质环境适宜性评价体系具有一定的理论意义。     

Potential for rainwater use in high-rise buildings in Australian cities

Rainwater is a traditional but underutilized water resource that has today had a resurgence due to the worldwide water crisis. This paper demonstrates the outcomes of research on the feasibility of rainwater use in high-rise residential envelopes for four Australian cities of Melbourne, Sydney, Perth and Darwin. Different climate patterns and various levels of water demand management were established for determination of storage dimensions; annual tank water use; reduction in both imported water flow and stormwater disposal; and water spillage from tanks. High level water demand management was a profoundly effective tool for reducing potable water supply, especially in combination with rainwater use. The economic feasibility of rainwater use systems were estimated; with Sydney having the shortest payback period compared to other cities either both with 3A rated appliances (8.6 years) or 5A ones installed (10.4 years). That was due to the higher and more consistent rainfall in Sydney. An outcome of this study was that Sydney was likely most suited to rainwater use, followed by Perth, Darwin, and then Melbourne. The objective of this study was to fill in the gap in estimating feasibility of rainwater use in various Australian cities. This investigation endeavors to provide assistance to water authorities and urban planners of Australian cities with the consideration of the potential of rainwater harvesting.     

内循环厌氧反应器多相流流场的三维数值分析简

利用数值模拟的方法，引入欧拉双流体多相流模型及标准k-ε紊流模型，模拟计算内循环厌氧反应器的三相流三维流场，并通过改变污泥颗粒密度及进水流量，针对固相流速及固含率的变化情况，分析条件的改变对流场的影响。研究结果表明，应用数值模拟方法可以获得内循环厌氧反应器内的流场特征；污泥颗粒密度及进水流量的改变对于反应器内污泥颗粒的流速及分布的均匀性有较为明显的影响。模拟结果对反应器的应用及优化设计具有一定的参考价值。     

Experimental study of the bio-oil production from sewage sludge by supercritical conversion process

Environment-friendly treatment of sewage sludge has become tremendously important. Conversion of sewage sludge into energy products by environment-friendly conversion process, with its energy recovery and environmental benefits, is being paid significant attention. Direct liquefaction of sewage sludge into bio-oils with supercritical water (SCW) was therefore put forward in this study, as de-water usually requiring intensive energy input is not necessary in this direct liquefaction. Supercritical water may act as a strong solvent and also a reactant, as well as catalyst promoting reaction process. Experiments were carried out in a self designed high-pressure reaction system with varying operating conditions. Through orthogonal experiments, it was found that temperature and residence time dominated on bio-oil yield compared with other operating parameters. Temperature from 350 to 500 °C and reaction residence time of 0, 30, 60 min were accordingly investigated in details, respectively. Under supercritical conversion, the maximum bio-oil yield could achieve 39.73%, which was performed at 375 °C and 0 min reaction residence time. Meanwhile, function of supercritical water was concluded. Fuel property analysis showed the potential of bio-oil application as crude fuel.