Some engineering aspects of homoionized mixed clay minerals

Many studies have been conducted to investigate thephysicochemical behavior of pure clay minerals and predicttheir engineering performance in the field. In this study, thephysicochemical properties of an artificial mixture of differentclay minerals namely, 40-50% montmorillonite, 20-30% illite and 10-15% kaolin were investigated. The mixture was homoionized with sodium, Na⁺; calcium, Ca²⁺; andaluminum, Al³⁺. The engineering properties studied wereconsistency limits, sediment volume, compressibility behavior,and hydraulic conductivity. The results revealed that theliquid, plastic and shrinkage limits of soil increased withincreasing cation valence. The hydraulic conductivity of thesoil also increased with an increase in the valence of thecation at any given void ratio. Aluminum and sodium treatedclays had the highest and the lowest modified compressionindex values, respectively. Furthermore, trivalent cationsaturated clayey soil consolidates three times faster thanthat of monovalent and two times faster than that of divalent.These properties of the soils determined were, in general,similar to those of kaolinite rather than those ofmontmorillonite. The comparison of the results obtained withthe published data in the literature revealed that thephysicochemical behavior of the tested clay soil was, ingeneral, similar to that of kaolinite.     

A Disturbance Index for Karst Environments

Karst environments, unique from other environments, require their own disturbance index. Karst resources are increasingly disturbed by a variety of processes related to social, physical, and economic factors. Recent studies have begun to qualify and quantify these disturbances, yet their focus has been limited to one or two factors such as biotic, geomorphic, or economic impacts. A more holistic approach, addressing economic, scientific, and cultural factors, is needed, to effectively assess the threats to karst areas. Currently, there is no efficient method to measure, compare, and contrast the disturbance of karst environments. We propose a hierarchal and standardized environmental disturbance index as a tool to measure regional impacts and highlight the areas of the karst system that require more protection or study. Addressed categories of disturbance include cultural, biotic, atmospheric, hydrological, and geomorphologic impacts.     

The household garbage in the western coast region of Turkey and its relationship with the socio-economic characterstics

The aim of this study is to detect the daily amount of household garbage generated from districts within the limits of municipality of Aydin, the amount and contents of recyclable materials and to evaluate the effect of socioeconomic state. In this cross sectional survey, garbage was collected for one day from all of the districts, weighed both totally and after separation into groups. The districts were assessed according to literacy, drinking water sources and toilet indexes. For each district, three indexes were calculated viz. literacy, water and sewage index. Points between 1-3 were given and by adding points of each index, socioeconomic development (SED) score was calculated for each district. The daily amount of garbage produced was 0.91 +/- 0.74 kg/person and recyclable material was 0.08 +/- 0.13 kg/person (6.4%). A significant corelation was found between SED point and amount of recyclable materials (p < 0.05). There was a positive, strong and significant correlation between workplaces in the districts and recyclable garbage (r = 0.597, p < 0.05). In further analysis, number of workplaces increased the daily amount of garbage by 9.9 times (p < 0.001; 95% confidence Interval: 4.538-15.189), whereas population 0.6 times (p < 0.05; 95% confidence interval: 0.407-0.708).     

Solid phase extraction and preconcentration of cobalt in mineral waters with PAR-loaded Amberlite XAD-7 and flame atomic absorption spectrometry

A simple, sensitive, accurate, and selective method for determination of ultratrace levels of Co is modified. The method is based on preconcentration of Co on the PAR-loaded Amberlite XAD-7 at pH 2.0 ± 0.2 for contact time as low as 45 min. The adsorbed cobalt was eluted with concentrated nitric acid and measured by flame atomic absorption spectrometry. Recoveries up to 90% were achieved. The optimized preconcentration method was applied to cobalt determination in natural mineral waters. The detection limit was found to be 0.1 ng mL⁻¹. The relative standard deviation was found to be 13% for 600 mL of 2.0 ng mL⁻¹, for 10 replicate preconcentration procedures. Cobalt concentrations in the studied water samples were found to be in the ranges of 0.5–3.5 ng mL⁻¹.     

Leaching characteristics of solid wastes from thermal power plants of western Turkey and comparison of toxicity methodologies

Use of lignite in power generation has led to increasing environmental problems associated not only with gaseous emissions, but also with the disposal of ash residues. In particular, use of low quality coals with high ash content results in huge quantities of both fly and bottom ashes to be disposed of. A main problem related to coal ash disposal is the heavy metal content of the residue. In this regard, experimental results of numerous studies indicate that toxic trace metals may leach when fly and bottom ashes are in contact with water. In this study, fly and bottom ash samples obtained from thermal power plants, namely Yenikoy, Kemerkoy and Yatagan, located at the southwestern coast of Turkey, were subjected to toxicity tests such as the extraction (EP) and toxicity characteristic leaching (TCLP) procedures of the US Environmental Protection Agency (USEPA) and the so-called 'Method A' extraction procedure of the American Society of Testing and Material (ASTM). The geochemical composition of ash samples showed variations depending on the coal burned in the plants. Furthermore, the EP, TCLP and ASTM toxicity tests showed variations such that the ash samples were classified as 'toxic waste' based on EP and TCLP results whereas they were classified as 'non-toxic' based on ASTM results, indicating test results are pH dependent. When the extraction results were compared with the chemical composition of water samples obtained in the vicinity of the thermal power plants, it was found that the results obtained using the ASTM procedure cannot be used to predict subsurface contamination whereas the EP and TCLP procedures can be used.     

The effect of micro-SiO2 and micro-Al2O3 additive on the strength properties of ceramic powder-based geopolymer pastes

Journal of Material Cycles and Waste Management - In this study, the effect of micro-SiO2 (S) and micro-Al2O3 (A) additives on the strength of geopolymer pastes was investigated. Micro...