Effect of 30 years of road traffic abandonment on epiphytic moss diversity

Road traffic emits a cocktail of pollutants that can influence the vegetation and plant diversity in neighboring areas. However, the recovery potential of bryophytes after traffic abandonment is still little explored. In addition, the effects of the main pollutants of road verges, such as metals and salinity, on moss flora need to be investigated. In our study, we compared the moss richness and diversity in two closely related veteran tree allees of high conservation importance. The allees in Gry?ów and Lubrza, Poland, were chosen because of their similarity in age, geographical location, type of surrounding areas, and tree species. The only difference was that the trees in Gry?ów had not been exposed to direct road pollution for almost 30 years. The moss richness and diversity differed significantly between the sites. Altogether, 20 moss species were recorded on 229 trees, 17 species in Gry?ów (abandoned road), and 13 in Lubrza (busy road). We found considerable differences between moss cover on the road-facing and opposite sides of tree trunks. In Lubrza, mosses on the road-facing side were very scarce. The moss cover in Gry?ów was highly balanced between trunk sides as well as among trunk heights. Typical epiphytic species such as Bryum moravicum, Dicranoweisia cirrata, Leskea polycarpa, and Orthodicranum tauricum preferred the Gry?ów tree stands, where they were present in numbers almost twice as high as that at Lubrza. The study shows that constructing a bypass road could be an effective conservation measure for veteran tree protection with their epiphytic moss flora.     

Acquisition feasibility and methane fermentation effectiveness of biomass of microalgae occurring in eutrophicated aquifers on the example of the Vistula Lagoon

This study was aimed at establishing the feasibility of microalgae biomass acquisition from waters of the Vistula Lagoon with the use of an installation operating in the fractional–technical scale, and at determining the effectiveness of biogas production from the acquired substrate. Depending on the technological solution of the concentration process, the degree of aquatic biomass hydration ranged from 99.6 to 97.90%. The quantity of biogas produced during methane fermentation fitted within the range of 243.9 to 395.2 dm³/kg d.m.. The values achieved were found to depend directly on the concentration of organic matter in the acquired water biomass and on system’s loading with a feedstock of organic compounds. The content of methane in a gaseous mixture ranged from 41.4 to 61.9%. The biomass produced was predominated by taxa belonging to Cyanoprokaryota, Bacillarophyceae, and Chlorophyta.     

Factors determining the occurrence of anthropogenic materials in nests of the white stork Ciconia ciconia

Environmental Science and Pollution Research - Birds have been using anthropogenic materials for nest construction for the past few decades. However, there is a trade-off between the use of new...     

The Modeling of the Acoustic Condition of Urban Environment Using Noise Annoyance Assessment

Environmental Modeling & Assessment - In the following article, a method of modeling urban environment exposed to road noise pollution for the purpose of noise nuisance assessment has been...     

Qualitative structure residue relationship analysis in the determination of the maximum residue limit of veterinary drugs

Aim of the present study was an attempt to find a correlation between physicochemical structure of veterinary drugs and the maximum residue limit (MRL) for muscle tissue of food producing animals. Direct correlation and analysis in quintile groups for 52 physicochemical parameters were performed. An internal validation using leave-one-out cross-validation was performed. In the quintile groups, there were 11 arithmetic expressions created for the limited group of individual parameters (13 from 52 analyzed), which showed a significant linear or quadratic correlation between the number of quintile group and the mean value of MRL within the quintile. The results obtained suggest that there is no direct correlation between individual physicochemical parameters and MRL value in muscle tissue; however, such correlation can be determined for arithmetic expressions created on the basis of several physicochemical parameters, using quintile group analysis.     

Anaerobic Biodegradation of Polymer Composites Filled with Natural Fibers

Polymer composites with natural fibers prepared by melt blending were investigated. Synthetic and natural macromolecules were used, including poly(lactic acid), polyhydroxybutyrate-co-polyhydroxyvalerate and low density polyethylene. These polymers were filled with flax fibers. Mechanical properties of the composites, biogas production and mass loss under anaerobic digestion have been presented. It has been shown that the mechanical properties sustain after 28 days of biodegradation. Such materials can be found in applications as packaging, as well as in medicine as polymeric scaffolds, and drug delivery systems etc.     

Determination of aluminium in groundwater samples by GF-AAS, ICP-AES, ICP-MS and modelling of inorganic aluminium complexes

The paper presents the results of aluminium determinations in ground water samples of the Miocene aquifer from the area of the city of Poznań (Poland). The determined aluminium content amounted from <0.0001 to 752.7 μg L(-1). The aluminium determinations were performed using three analytical techniques: graphite furnace atomic absorption spectrometry (GF-AAS), inductively coupled plasma atomic emission spectrometry (ICP-AES) and inductively coupled plasma mass spectrometry (ICP-MS). The results of aluminium determinations in groundwater samples for particular analytical techniques were compared. The results were used to identify the ascent of ground water from the Mesozoic aquifer to the Miocene aquifer in the area of the fault graben. Using the Mineql+ program, the modelling of the occurrence of aluminium and the following aluminium complexes: hydroxy, with fluorides and sulphates was performed. The paper presents the results of aluminium determinations in ground water using different analytical techniques as well as the chemical modelling in the Mineql+ program, which was performed for the first time and which enabled the identification of aluminium complexes in the investigated samples. The study confirms the occurrence of aluminium hydroxy complexes and aluminium fluoride complexes in the analysed groundwater samples. Despite the dominance of sulphates and organic matter in the sample, major participation of the complexes with these ligands was not stated based on the modelling.     

Chemical oxygen demand reduction of various wastewater types using magnetic field-assisted fenton reaction.

Constant magnetic field (CMF) was investigated for its potential to intensify chemical oxygen demand (COD) removal in wastewater when applied with a generalized Fenton reaction. Various types of industrial and domestic wastewater were tested in the experiment. A significant dependence was observed between the wastewater type, dose of reacting substances, time of exposure to CMF, effectiveness of COD removal, and the rate of the advanced oxidation process. The use of CMF resulted in the improvement of the treatment process; however, the efficiency depended to a great extent on the type of wastewater and characteristics of the contained organic matter. Domestic wastewater seemed to be most amenable to the applied treatment (82% COD reduction). The least reduction in COD occurred for wood industry wastewater. In the analyzed wastewater, intense oxidation was observed during the first 60 minutes of the process. Longer reaction time did not increase COD reduction, with the exception of wood industry wastewater. The experiment revealed the possibility of applying smaller doses of the Fenton's reagent, thereby keeping up unchanged treatment efficiency, provided that CMFs are applied.     

Cadmium,lead and mercury concentrations in pathologically altered human kidneys

Heavy metals, including cadmium (Cd), lead (Pb) and mercury (Hg) act as nephrotoxic agents, particularly in the renal cortex. The aim of the study was to determine the concentrations of Cd, Pb and Hg in kidneys removed from patients due to lesions of various etiologies and from patients after the rejection of transplanted kidneys. Additionally, we determined the influence of selected biological and environmental factors on the concentrations of toxic metals. The study material consisted of kidneys with tumor lesions (n = 27), without tumors (n = 7) and its extracted grafts (n = 10) obtained from patients belongs to the north-western areas of Poland. The determined metal concentrations in the renal cortex and medulla may be arranged in the following descending order: Cd > Pb > Hg. The highest concentrations of Cd and Hg were found in the cortex, while the maximum content Pb was observed in the medulla. Significant correlations were found in the concentrations of the same metals between cortex and medulla and between Pb and Hg in the renal medulla. Pb content was higher in the renal medulla of men than in the cortex of the elderly (above 60 years of age). The highest concentrations of Pb and Hg were found in the cortex and medulla, of the kidneys had not neoplastic changes, and lower content of these metals were found in the extracted kidney grafts. In summary, renal grafts accumulate less heavy metals than cancerous kidneys, what could have been caused by immunosuppressors taken by the graft recipients. Moreover, sex, age and smoking are key factors responsible for xenobiotics concentrations.