Impact assessment of treated/untreated wastewater toxicants discharged by sewage treatment plants on health, agricultural, and environmental quality in the wastewater disposal area

Studies were undertaken to assess the impact of wastewater/sludge disposal (metals and pesticides) from sewage treatment plants (STPs) in Jajmau, Kanpur (5 MLD) and Dinapur, Varanasi (80 MLD), on health, agriculture and environmental quality in the receiving/application areas around Kanpur and Varanasi in Uttar Pradesh, India. The raw, treated and mixed treated urban wastewater samples were collected from the inlet and outlet points of the plants during peak (morning and evening) and non-peak (noon) hours. The impact of the treated wastewater toxicants (metals and pesticides) on the environmental quality of the disposal area was assessed in terms of their levels in different media samples viz., water, soil, crops, vegetation, and food grains. The data generated show elevated levels of metals and pesticides in all the environmental media, suggesting a definite adverse impact on the environmental quality of the disposal area. The critical levels of the heavy metals in the soil for agricultural crops are found to be much higher than those observed in the study areas receiving no effluents. The sludge from the STPs has both positive and negative impacts on agriculture as it is loaded with high levels of toxic heavy metals and pesticides, but also enriched with several useful ingredients such as N, P, and K providing fertilizer values. The sludge studied had cadmium, chromium and nickel levels above tolerable levels as prescribed for agricultural and lands application. Bio-monitoring of the metals and pesticides levels in the human blood and urine of the different population groups under study areas was undertaken. All the different approaches indicated a considerable risk and impact of heavy metals and pesticides on human health in the exposed areas receiving the wastewater from the STPs.     

Larvicidal potential of Nerium indicum and Thuja oriertelis extracts against malaria and Japanese encephalitis vector

Ethanolic and acetone extracts of Nerium indicum and Thuja orientelis have been studied against III instar larvae of Anopheles stephensi and Culex quinquefasciatus. Ethanolic extract of N. indicum is found more effective than its acetone extract against anopheline larvae with LC50 values of 185.99 and 148.05 ppm for former and 229.28 and 149.43 ppm for the later after 24 and 48 hrs of exposure. The acetone extract with LC50 values of 209.00 and 155.97 ppm is more effective in case of culicine larvae than its ethanolic extract with LC50 494.07 and 194.49 ppm after 24 and 48 hours of treatment. Ethanolic extract of T. orientelis is more effective against both the larval species with LC50 values of 13.10 and 9.02 ppm after 24 and 48 hours for anopheline and 22.74 and 16.72 ppm against culicine larvae. The acetone extract showed LC50 values of 200.87 and 127.53 ppm against anopheline and 69.03 and 51.14 ppm against culicine larvae. Thus ethanolic extract of T. orientelis is an ideal potential larvicide for both types of mosquito larvae.     

Agroforestry in the Western Ghats of peninsular India and the satoyama landscapes of Japan: a comparison of two sustainable land use systems

Agroforestry in the Western Ghats (WG) of peninsular India and satoyama in rural Japan are traditional land-use systems with similar evolutionary trajectories. Some of their relevance was lost by the middle of the twentieth century, when modern agricultural technologies and urbanisation engineered shifts in emphasis towards maximising crop production. There has been, however, a resurgence of interest in traditional land-use systems recently, in view of their ability to provide ecosystem services. Both agroforestry and satoyama are thought to be harbingers of biological diversity and have the potential to serve as “carbon forests.” Carbon (C) stock estimates of the sampled homegardens in WG ranged from 16 to 36 Mg ha⁻¹. Satoyama woodlands owing to variations in tree stocking and management conditions indicated widely varying C stocks (2–279 Mg ha⁻¹). Agroforestry and satoyama also differ in nature, complexity, and objectives. While agroforestry involves key productive and protective functions, and adopts ‘intensive management’, the satoyama woodlands are extensively managed; understorey production is seldom a consideration. Differences in canopy architecture (multi-tiered structure of agroforestry vs. the more or less unitary canopy of satoayama) and land ownership pattern (privately owned/managed agroforestry holdings vs. community or local government or privately owned and mostly abandoned satoyamas) pose other challenges in the transfer and application of knowledge gained in one system to the other. Nonetheless, lessons learnt from satoyama conservation may be suitable for common pool resource management elsewhere in Asia, and aspects relating to understorey production in agroforestry may be relevant for satoyama under certain scenarios.     

Influence of aerosol spectrum and air pollutants on fog formation in urban environment of megacity Delhi, India

Urban areas are facing increasing fog frequencies that may result due to increased air pollution emanating from variety of sources. The increased pollution levels may lead to the atmospheric reactions resulting into the formation of secondary pollutants that may also lead to increased aerosol number concentrations (ANC) in the atmosphere. This could cause enhanced water aerosols in the presence of favourable meteorological conditions and high relative humidity. This study deals with the atmospheric pollution and visibility during winter season of megacity Delhi in order to assess the relationship between the two specifically during fog episodes. Thus, this study analyses the levels of air pollutants, aerosol spectrum and meteorological conditions during one week each in the winter season of the years 2004 and 2006 in order to have an improved understanding of their role in fog formation in mega-city Delhi. More than 300 h of measurements which included episodes of dense, thick and moderate fogs of about 25 h, were studied. The measurements cover most of the accumulation mode and greater size spectrum of aerosols. Thus, the analysis is performed for the entire period, specifically, before the fog sets up, during and afterwards. In general, the relatively small variations in number concentration show larger variations in visibility prior and post dense fog formation than during dense fog episodes. Preliminary analysis of monthly averaged RSPM (Respirable Suspended particulate Matter or PM(10)) concentration values for four winter months for a period of 6 years (1996-2001) and visibility did not show a good correlation with total occurrences of fog. However, daily averaged RSPM concentration showed a good correlation with the occurrences of thick fog. Diurnal variation of Sulfur-dioxide and Nitrogen dioxide were found to have inverse relationship with visibility during fog which may be due to formation of secondary pollutants such as sulfate and to a lesser extent nitrates. Amongst, the daily averaged concentrations of all the criteria pollutants, RSPM was found to be best correlated with the fog in comparison to other pollutants.     

Assessment of large-scale deforestation of Nawarangpur district, Orissa, India: a remote sensing based study

The Nawarangpur district, Orissa, a tropical region with Sal mixed moist deciduous and Sal mixed dry deciduous forests, has been affected by extensive deforestation. The district was surveyed using Landsat MSS (1973), Landsat TM (1990) and IRS P6 LISS III (2004) satellite imagery. From 1973 to 1990, more than 888.6 km(2) of dense forest (rate of deforestation = 3.62) and from 1990 to 2004, 429.7 km(2) (rate of deforestation = 3.97) were found to have been deforested. The analysis of results identified the reduction in area of dense forest and increase of agricultural land, degraded areas of abandoned agricultural land and unproductive scrub. There is an urgent need for rational management of the remaining forest for it to be able to survive beyond next decades. From this study it can be concluded that temporal changes and the factors affecting these changes should be determined for sustainable management of natural resources.     

Microbial degradation of pyridine using Pseudomonas sp. and isolation of plasmid responsible for degradation

Pseudomonas (PI2) capable of degrading pyridine was isolated from the mixed population of the activated sludge unit which was being used for treating complex effluents, the strain was characterized. Aerobic degradation of pyridine was studied with the isolated strain and the growth parameters were evaluated. Pyridine degradation was further conformed by chromatography (HPLC) analysis. The process parameters like biomass growth and dissolved oxygen consumption were monitored during pyridine degradation. In order to conform with the plasmid capability to degrade pyridine, the requisite plasmid was isolated and transferred to DH 5alpha Escherichia coli. The subsequent biodegradation studies revealed the ability of the transformed plasmid capability to degrade the pyridine.     

Kinetic parameters for the removal of lead and chromium from wastewater using activated carbon developed from fertilizer waste material

The waste slurry generated in fertilizer plants in India has been converted into a cheap carbonaceous adsorbent material. The prepared adsorbent has been characterised and used for the removal of lead and chromium metals. The kinetics of adsorption and the extent of adsorption at equilibrium are dependent on the physical and chemical characteristics of the adsorbate, adsorbent and experimental system. Results of laboratory scale studies conducted to delineate the effect of such parameters on the kinetics of adsorption of metal ions are reported. Parameters evaluated include: hydronium ion concentration, temperature, initial adsorbate concentration, size of adsorbent, and amount of adsorbent. On the basis of these studies the various physical parameters such as effective diffusion coefficient, activation energies and entropy of activation are evaluated, as these provide some information regarding the mechanistic aspects. Mass transfer coefficient values suggest a rapid transport of the adsorbate from bulk to solid phase.