Quantitative structure-retention relationship for retention behavior of organic pollutants in textile wastewaters and landfill leachate in LC-APCI-MS

Introduction  

A quantitative structure-retention relation (QSRR) study was conducted on the retention times of organic pollutants in textile wastewaters and landfill leachate which was obtained by liquid chromatography-reversed phase-atmospheric pressure chemical ionization-mass spectrometry.     

Properties of Poly(Vinyl Alcohol)/Chitosan Nanocomposite Films Reinforced with Oil Palm Empty Fruit Bunch Amorphous Lignocellulose Nanofibers

The objective of this study was to investigate the properties of poly(vinyl alcohol)/chitosan nanocomposite films reinforced with different concentration of amorphous LCNFs. The properties analyzed were morphological, physical, chemical, thermal, biological, and mechanical characteristics. Oil palm empty fruit bunch LCNFs obtained from multi-mechanical stages were more dominated by amorphous region than crystalline part. Varied film thickness, swelling degree, and transparency of PVA/chitosan nanocomposite films reinforced with amorphous part were produced. Aggregated LCNFs, which reinforced PVA/chitosan polymer blends, resulted in irregular, rough, and uneven external surfaces as well as protrusions. Based on XRD analysis, there were two or three imperative peaks that indicated the presence of crystalline states. The increase in LCNFs concentration above 0.5% to PVA/chitosan polymer blends led to the decrease in crystallinity index of the films. A noticeable alteration of FTIR spectra, which included wavenumber and intensity, was obviously observed along with the inclusion of amorphous LCNFs. That indicated that a good miscibility between amorphous LCNFs and PVA/chitosan polymer blend generated chemical interaction of those polymers during physical blending. Reinforcement of PVA/chitosan polymer blends with amorphous LCNFs influenced the changes of T_g (glass transition temperature), T_m (melting point temperature), and T_max (maximum degradation temperature). Three thermal phases of PVA/chitosan/LCNFs nanocomposite films were also observed, including absorbed moisture evaporation, PVA and chitosan polymer backbone structural degradation and LCNFs pyrolysis, and by-products degradation of these polymers. The addition of LCNFs 0.5% had the highest tensile strength and the addition of LCNFs above 0.5% decreased the strength. The incorporation of OPEFB LCNFs did not show anti-microbial and anti-fungal properties of the films. The addition of amorphous LCNFs 0.5% into PVA/chitosan polymer blends resulted in regular and smooth external surfaces, enhanced tensile strength, increased crystallinity index, and enhanced thermal stability of the films.     

A market modeling review study on predicting Malaysian consumer behavior towards widespread adoption of PHEV/EV

With the rising concern about climate change, there has been an increased public awareness that has resulted in new government policies to support scientific research for mitigating these problems. Malaysia is among the major energy-intense countries and is under an excessive burden to advance its energy efficiency and to also work towards the reduction of its carbon emission. Plug-in hybrid electric vehicles (PHEVs) have the potential to lessen the carbon emission and gasoline consumption in order to alleviate environmental problems. Most of the energy problems linked to the increasing transportation pollution are now being reduced with the solution of the adoption of PHEVs. PHEVs are seen as a solution to cut carbon emission, which prevents environmental damages. Furthermore, PHEVs’ driving range and performance can be comparable to the other hybrid vehicles as well as the conventional IC engines that have gasoline and diesel tanks. Thus, many efforts are being initiated to promote the use of PHEVs as an innovative and affordable transportation system. In order to achieve making the consumers aware of the adoption of PHEVs, we used a model which is based on the extended theory of planned behavior (TPB). This review is based on the factors affecting the adoption of PHEVs among Malaysian consumers. The model takes into account the ten key features that influence the adoption of PHEVs, such as environmental concern, personal norm, attitude, vehicle ownership costs, driving range, charging time, intention, subjective norm, perceived behavioral control, and personal norm. All these constructs are drivers towards the adoption of PHEVs. These factors affect the relationship between the adoption of PHEVs and how consumers intend to protect the environment. This review is based on improving how the “attitude-action” gap is understood as it is an important element for further studies on PHEVs. The aim of the research is to come up with a framework that examines how to modify the consumer’s environmental concerns in acquiring PHEVs. This will pave the way for more academic research and future works that can emphasize how to obtain empirical results. The authors’ recommendation is that, before a consumer’s behavior is assessed and considered, an observation of the current technology is needed with methods and knowledge of the existing technology adoption aspect.     

Energy,exergy, and economic analysis of solar still using coal cylinder fins: an experimental study

Environmental Science and Pollution Research - The phenomenon of drinking water scarcity has turned into the foremost issue that the world’s populace is facing today. The Algerian desert...     

Natural radionuclides distribution and environmental impacts of ferruginous sand-siltstone (raw material) and their manufactured Ahmer oxide used as wall paints

Commercially known Ahmer oxide paints are prepared from raw material mainly composed of red iron oxides (hematite) and iron oxyhydroxides. The raw material used in manufacturing of Ahmer oxide comes from some localities in southwest Sinai such as Abu Thor, Allouga, and El lehian. The adsorption of uranium and other radioelements on iron oxides could make the raw material (red iron oxides) and their products environmentally hazardous. The studied samples were subjected to radiometric analysis using NaI (Tl) gamma-ray spectrometer. The average activity concentration of U, Th, Ra, and K are 108.7, 458.8, 88.8, and 627.5?Bq?kg^?1, respectively in raw material and 136.4, 14.6, 58.3, and 95.9?Bq?kg^?1 in Ahmer oxide. High values of activity concentrations of ²³⁸U, ²²⁶Ra, and ⁴⁰K were recorded in Allouga and El lehian raw material. High radioactivities of Allouga and El lehian raw material are mainly attributed to the presence of torbernite, zircon, and monazite, in addition to adsorbed elemental uranium in Ahmer oxide. absorbed dose rate (D), annual effective dose equivalent, radium equivalent activity (Ra_eq), external hazard index (H_ex), and internal hazard index (H_in), as well as representative gamma index (Iγ) were determined from the activity concentrations of ²²⁶Ra, ²³²Th, and ⁴⁰K. Some of the studied samples do not satisfy the universal standards.     

Health risk assessment of heavy metal intake due to fish consumption in the Sistan region,Iran

The heavy metal (Pb, Cd, Cr, and Ni) content of a fish species consumed by the Sistan population and its associated health risk factors were investigated. The mean concentrations of Pb, Cd, and Cr were slightly higher than the standard levels. The Ni content of fish was below the maximum guideline proposed by the US Food and Drug Administration (USFDA). The average estimated weekly intake was significantly below the provisional tolerable intake based on the FAO and WHO standards for all studied metals. The target hazard quotients (THQ) of all metals were below 1, showing an absence of health hazard for the population of Sistan. The combined target hazard quotient for the considered metals was 26.94 × 10^?3. The cancer risk factor for Pb (1.57 × 10^?7) was below the acceptable lifetime carcinogenic risk (10^?5). The results of this study reveal an almost safe level of Pb, Cd, Cr, and Ni contents in the fish consumed by the Sistan population.

Open image in new window

Graphical abstract ?

     

Molybdenum (Mo) increases endogenous phenolics,proline and photosynthetic pigments and the phytoremediation potential of the industrially important plant Ricinus communis L. for removal of cadmium from contaminated soil

Cadmium (Cd) in agricultural soil negatively affects crops yield and compromises food safety. Remediation of polluted soil is necessary for the re-establishment of sustainable agriculture and to prevent hazards to human health and environmental pollution. Phytoremediation is a promising technology for decontamination of polluted soil. The present study investigated the effect of molybdenum (Mo) (0.5, 1.0 and 2.0 ppm) on endogenous production of total phenolics and free proline, plant biomass and photosynthetic pigments in Ricinus communis plants grown in Cd (25, 50 and 100 ppm) contaminated soils and the potential for Cd phytoextraction. Mo was applied via seed soaking, soil addition and foliar spray. Foliar sprays significantly increased plant biomass, Cd accumulation and bioconcentration. Phenolic concentrations showed significantly positive correlations with Cd accumulation in roots (R ² = 0.793, 0.807 and 0.739) and leaves (R ² = 0.707, 721 and 0.866). Similarly, proline was significantly positively correlated with Cd accumulation in roots (R ² = 0.668, 0.694 and 0.673) and leaves (R ² = 0.831, 0.964 and 0.930). Foliar application was found to be the most effective way to deliver Mo in terms of increase in plant growth, Cd accumulation and production of phenolics and proline.

     

Simultaneous derivatization and extraction of nitrophenols in soil and rain samples using modified hollow-fiber liquid-phase microextraction followed by gas chromatography–mass spectrometry

A simple and sensitive method based on a modified hollow-fiber liquid-phase microextraction followed by gas chromatography–mass spectrometry has been successfully developed for the extraction and simultaneous derivatization of some nitrophenols (NPs) in soil and rain samples. Microwave-assisted solvent extraction was used for the extraction of NPs from the soil, while the rain sample was directly applied to the previously mentioned method. Briefly, in this method, the analytes were extracted from aqueous samples into a thin layer of organic solvent (dodecane?+?10 % tri-n-octylphosphine oxide) sustained in the pores of a porous hollow fiber. Then, they were back-extracted using a small volume of organic acceptor solution (25 μl; 10 mg/L N-methyl-N-(trimethylsilyl)trifluoroacetamide, as derivatization reagent, in acetonitrile) that was located inside the lumen of the hollow fiber. Under the optimized extraction conditions, enrichment factors of 255 to 280 and limits of detection of 0.1 to 0.2 μg/L (S/N?=?3) with dynamic linear ranges of 1–100 μg/L were obtained for the analytes. The accuracy of the approach was tested by the relative recovery experiments on spiked samples, with results ranging from 93 to 113 %. The method was shown to be rapid, cost-effective, and potentially interesting for screening purposes.