Characteristics of major secondary ions in typical polluted atmospheric aerosols during autumn in central Taiwan

In autumn of 2008, the chemical characteristics of major secondary ionic aerosols at a suburban site in central Taiwan were measured during an annually occurring season of high pollution. The semicontinuous measurement system measured major soluble inorganic species, including NH(4)(+), NO(3)(-), and SO(4)(2-), in PM(10) with a 15 min resolution time. The atmospheric conditions, except for the influences of typhoons, were dominated by the local sea-land breeze with clear diurnal variations of meteorological parameters and air pollutant concentrations. To evaluate secondary aerosol formation at different ozone levels, daily ozone maximum concentration (O(3,daily max)) was used as an index of photochemical activity for dividing between the heavily polluted period (O(3,daily max) ≧80 ppb) and the lightly polluted period (O(3,daily max)<80 ppb). The concentrations of PM(10), NO(3)(-), SO(4)(2-), NH(4)(+) and total major ions during the heavily polluted period were 1.6, 1.9, 2.4, 2.7 and 2.3 times the concentrations during the lightly polluted period, respectively. Results showed that the daily maximum concentrations of PM(10) occurred around midnight and the daily maximum ozone concentration occurred during daytime. The average concentration of SO(2) was higher during daytime, which could be explained by the transportation of coastal industry emissions to the sampling site. In contrast, the high concentration of NO(2) at night was due to the land breeze flow that transport inland urban air masses toward this site. The simulations of breeze circulations and transitions were reflected in transports and distributions of these pollutants. During heavily polluted periods, NO(3)(-) and NH(4)(+) showed a clear diurnal variations with lower concentrations after midday, possibly due to the thermal volatilization of NH(4)NO(3) during daytime and transport of inland urban plume at night. The diurnal variation of PM(10) showed the similar pattern to that of NO(3)(-) and NH(4)(+) aerosols. This indicated that the formatted secondary aerosols in the inland urban area could be transported to the coastal area by the weak land breeze and deteriorated the air quality in the coastal area at night.     

中国部分城市自来水的总有机碳测定

自来水是城镇居民的主要生活用水来源,用总有机碳(TOC)方法可快速监测其有机污染情况,保障人民生活质量。测定了国内13个城市的自来水TOC值,一定程度上反映了当前国内自来水的有机污染现状。     

IC+复合好氧反应器处理中药废水

中药废水成分复杂,水质变化大,可生化性较好。采用IC(内循环反应器)+复合好氧反应器工艺处理中药废水,运行结果表明:COD、BOD5、NH3-N及SS平均去除率分别达98%、98.7%、74%和90%,出水水质达到GB 8978—96《污水综合排放标准》一级标准。     

IC反应器厌氧氨氧化启动与运行特性研究

采用一套有效容积为20 L的IC反应器,接种啤酒废水厌氧处理池污泥,保持反应器进水NH+4-N浓度为120 mg/L,NO-2-N浓度为150 mg/L,在温度为30±1 ℃的条件下,对ANAMMOX反应过程的启动和运行特性进行了研究.结果表明反应器的启动经历了污泥低负荷驯化期、负荷提高期和高负荷运行期3个阶段;在反应器运行到第130 d,反应器启动成功;NH+4-N和NO-2-N的去除率分别约82.1%和94.5%;去除的NH+4-N和NO-2-N及生成的NO-3-N三者之间的比值为11.160.3;在反应器中形成了粒径为1～2 mm的颗粒污泥.     

Determination of haloacetic acids in hospital effuent after chlorination by ion chromatography

The ion chromatography combined solid phase extraction (SPE) method was developed for the analysis of low concentration haloacetic acids (HAAs), a class of disinfection by-products formed from chlorination of hospital wastewater. The monitored HAAs included monochloroacetic acid, monobromoacetic acid, dichloroacetic acid, dibromoacetic acid and trichloroacetic acid. The method employed a sodium hydroxide eluent at a flow rate of 0.8 mlmin, electrolytically generated gradients, and suppressed conductivity detection. To analyze the HAAs in real hospital wastewater samples, C18 pretreatment cartridge was utilized to reduce samples' turbidity. Preconcentration with SPE and matrix elimination with treatment cartridges were investigated and found to be able to obtain acceptable detection limits. Linearity, repeatability and detection limits of the above method were evaluated. The detection limits of monobromoacetic acid and dibromoacetic acid were 2.61 μgL and 1.30 μgL, respectively, and the other three acids are ranging from 0.48 to 0.82 μgL under 25-fold preconcentration. When the above optimization procedure was applied to three hospital wastewater samples with different treatment processes in Tianjin, it was found that the dichloroacetic acid was the major compound, and the growth ratios of the HAAs after disinfection by sodium hypochlorite were 91.28%, 63.61% and 79.50%, respectively.     

柠檬酸废水处理工艺--IC厌氧反应器和好氧生化技术

介绍了ＩＣ厌氧反应器的运行管理、启动情况、运行结果，介绍了兼氧－好氧生化技术并提出了进一步改进的措施，柠檬酸废水通过ＩＣ厌氧反应器和兼氧一好氧技术工艺流程，达到污水综合排放标准中的二级标准。     

Determination of haloacetic acids concentrations in hospital effluent after chlorination by ion chromatography

The ion chromatography combined solid phase extraction (SPE) method was developed for the analysis of low concentration haloacetic acids(HAAs),a calss of disinfection by-products formed as a result of chlorination of hospital wastewater. The monitored HAAs included monochloroacetic acid, monobromoacetic acid, dichloroacetic acid, dibromoacetic acid and trichloroacetic acid. The method employed a sodium hydroxide eluent at a flow rate of 0.8 ml/min, electrolytically generated gradients, and suppressed conductivity detection. To analyze the HAAs in real hospital wastewater samples, C18 pretreatment cartridge was utilized to reduce samples' turbidity. Preconcentration with SPE and matrix elimination with treatment cartridges were investigated and were found to be able to obtain acceptable detection limits. Linearity, repeatability and detection limits of the above method were evaluated. The detection limits of monobromoacetic acid and dibromoacetic acid were 2.61 μg/L and 1.30 μg/L respectively, and the other three are ranging from 0.48 to 0.82 μg/L under 25-fold preconcentration. When the above optimization procedure was applied to three hospital wastewater samples with different treatment processes in Tianjin, it was found that the dichloroacetic acid is the major compound, and the growth ratios of the HAAs after disinfection by sodium hypochlorite were 91.28%, 63.61% and 79.50%, respectively.     

集成电路芯片生产的环境保护

集成电路产业对国民经济的发展起着“倍增器”的作用,集成电路芯片的加工生产工艺流程比较复杂,污染因子多,环境问题突出。笔者详细分析了典型芯片制造厂污染物的产生及应采取的环保治理措施,对于芯片生产排放的半导体特殊气体,目前我国尚无排放标准,提出了参照执行技术引进国的有关标准。     

高钙废水颗粒污泥中古菌菌群结构变化的分析

为了解高浓度Ca~(2+)与颗粒污泥中古菌菌群结构的关系,利用高通量测序分析IC(Internal Circulation)反应器(以废纸造纸废水为处理对象)内不同高度处颗粒污泥中古菌菌群组成,并利用SEM(Scanning Electron Microscope)和EDS(Energy Dispersive X-ray Spectroscopy)分析颗粒污泥的形态结构和元素组成,同时借助红外光谱和XRD(X-ray diffraction)分析不同高度处颗粒污泥化学结构中各官能团的分布情况和无机成分.结果表明,随着反应器高度的增加,颗粒污泥中的无机成分CaCO_3也随着增加,而种泥中钙含量只有1.81%.种泥和ICR反应器内的颗粒污泥中古菌在门分类水平上主要包括Euryarchaeota和Bathyarchaeota,两者之和占90%以上.在属分类水平上,主要包括Methanosaeta、Methanoregula、Methanobacterium、Methanosarcina、Methanolinea、Methanospirillum等.种泥中古菌的物种多样性要明显高于IC反应器中,在IC反应器中不同高度处古菌生物多样性由高到低的顺序是5 m2 m7 m,5 m处的古菌物种更加丰富.随着反应器高度的增加,乙酸营养型甲烷菌的相对丰度呈现递增趋势,氢营养型甲烷菌则呈现递减趋势,而种泥中氢营养型甲烷菌相对丰度较大.这表明颗粒污泥在高钙废水的长期作用下,氢营养型甲烷菌的相对丰度减少,乙酸营养型甲烷菌的相对丰度增多,系统中古菌物种的相对丰度和多样性有所下降.CaCO_3沉淀使颗粒污泥的产甲烷活性降低,主要表现为其对氢营养型甲烷菌具有较大的抑制作用.     

厌氧工艺处理金霉素废水的比较研究

对升流式厌氧污泥床(UASB)、厌氧复合床(UBF)、内循环厌氧反应器(IC)3种厌氧工艺处理金霉素废水进行了比较研究.研究了反应器的结构特点,从反应器内污泥浓度和传质过程、工程投资等方面分析了3种厌氧工艺对金霉素废水的处理效果.结果表明:IC反应器在容积负荷(N_v)为5.5 kg/(m3·d)(以COD_Cr计)时, COD_Cr去除率平均值为84.36%;UBF反应器在容积负荷为3.5 kg/(m3·d)时,COD_Cr去除率平均值为75.04%;UASB反应器在容积负荷为3.0 kg/(m3·d)时,COD_Cr去除率平均值为71.43%.IC反应器与UASB和UBF反应器相比,在容积负荷,COD_Cr去除率和工程投资方面都具有明显的优势,是处理金霉素废水可取的厌氧工艺.