不同氮源对外源多胺在东海原甲藻生长作用中的影响

为探究多胺在东海赤潮高发区赤潮演替过程中的作用,利用中肋骨条藻(Skeletonema costatum)消亡期的藻液培养东海原甲藻(Prorocentrum donghaiense),探究多胺(腐胺、亚精胺、精胺)对东海原甲藻生长的影响,结果表明:在不同氮源的介质中,多胺对东海原甲藻生长的作用不同;在以硝酸盐和尿素为氮源补充时,添加多胺对东海原甲藻的生长有促进作用,且浓度越高,促进作用越明显;在补充复杂的有机氮源情况下,添加多胺对东海原甲藻的生长有抑制作用,且浓度越高,抑制作用越强烈。多胺对东海原甲藻生长的作用需要结合水体中的其他物质综合考虑。     

积分安培检测-离子色谱法同时测定地下水中的溴离子和碘离子

采用积分安培-离子色谱法同时测定地下水中的溴离子和碘离子,该方法的相关性好(r>0.999),精密度高(RSD%<4.0),样品加标回收率为90~110%,溴离子检出限为5.6μg/L,碘离子检出限为2.1μg/L。本法简便、快速、准确且选择性好,可用于分析地下水中的溴离子和碘离子。     

佛山高明河水环境多环芳烃的分布特征与通量研究

利用液液萃取法和气相色谱-质谱方法对佛山境内高明河水环境多环芳烃（PAHs）进行了测定,并对PAHs的分布特征与通量进行了初步研究.结果表明高明河水环境中16种优控PAHs的浓度范围在41.6～375.6 ng/l之间,从上游到下游总体呈递增的趋势,其下游浓度偏高可能与荷城街道较为密集的工业和人口分布有关.高明河水环境PAHs的总含量高于欧美一些低污染水域,但低于国内一些主要河流.高明河PAHs年通量约为333.8 kg.     

Debromination of decabromodiphenyl ether by organo-montmorillonite-supported nanoscale zero-valent iron：Preparation, characterization and influence factors

An organo-montmorillonite-supported nanoscale zero-valent iron material(M-NZVI) was synthesized to degrade decabromodiphenyl ether(BDE-209). The results showed that nanoscale zero-valent iron had good dispersion on organo-montmorillonite and was present as a core-shell structure with a particle size range of nanoscale iron between 30–90 nm, characterized by XRD, SEM, TEM, XRF, ICP-AES, and XPS. The results of the degradation of BDE-209 by M-NZVI showed that the efficiency of M-NZVI in removing BDE-209 was much higher than that of NZVI. The efficiency of M-NZVI in removing BDE-209 decreased as the pH and the initial dissolved oxygen content of the reaction solution increased, but increased as the proportion of water in the reaction solution increased.     

Formation pathways of brominated products from benzophenone-4 chlorination in the presence of bromide ions

The brominated products, formed in chlorination treatment of benzophenone-4 in the presence of bromide ions, were identified, and the formation pathways were proposed.Under disinfection conditions, benzophenone-4 would undertake electrophilic substitution generating mono- or di-halogenated products, which would be oxidized to esters and further hydrolyzed to phenol derivatives. The generated catechol intermediate would be transformed into furan-like heterocyclic product. The product species were p H-dependent,while benzophenone-4 elimination was chlorine dose-dependent. When the chlorination treatment was performed on ambient water spiked with benzophenone-4 and bromide ions, most of brominated byproducts could be detected, and the acute toxicity significantly increased as well.     

Removal of polycyclic aromatic hydrocarbons from aqueous solution by raw and modified plant residue materials as biosorbents

Removal of polycyclic aromatic hydrocarbons （PAHs）, e.g., naphthalene, acenaphthene, phenanthrene and pyrene, from aqueous solution by raw and modified plant residues was investigated to develop low cost biosorbents for organic pollutant abatement. Bamboo wood, pine wood, pine needles and pine bark were selected as plant residues, and acid hydrolysis was used as an easily modification method. The raw and modified biosorbents were characterized by elemental analysis, Fourier transform infrared spectroscopy and scanning electron microscopy. The sorption isotherms of PAHs to raw biosorbents were apparently linear, and were dominated by a partitioning process. In comparison, the isotherms of the hydrolyzed biosorbents displayed nonlinearity, which was controlled by partitioning and the specific interaction mechanism. The sorpfion kinetic curves of PAHs to the raw and modified plant residues fit well with the pseudo second-order kinetics model. The sorption rates were faster for the raw biosorbents than the corresponding hydrolyzed biosorbents, which was attributed to the latter having more condensed domains （i.e., exposed aromatic core）. By the consumption of the amorphous cellulose component under acid hydrolysis, the sorption capability of the hydrolyzed biosorbents was notably enhanced, i.e., 6-18 fold for phenanthrene, 6-8 fold for naphthalene and pyrene and 5-8 fold for acenaphthene. The sorpfion coefficients （Kd） were negatively correlated with the polarity index [（O＋N）/C], and positively correlated with the aromaticity of the biosorbents. For a given biosorbent, a positive linear correlation between logKoc and logKow for different PAHs was observed. Interestingly, the linear plots of logKoc-logKow were parallel for different biosorbents. These observations suggest that the raw and modified plant residues have great potential as biosorbents to remove PAHs from wastewater.     

Inhibitory effects of nisin-coated multi-walled carbon nanotube sheet on biofilm formation from Bacillus anthracis spores

Multi-walled carbon nanotube（MWCNT） sheet was fabricated from a drawable MWCNT forest and then deposited on poly（methyl methacrylate） film. The film was further coated with a natural antimicrobial peptide nisin. We studied the effects of nisin coating on the attachment of Bacillus anthracis spores, the germination of attached spores, and the subsequent biofilm formation from attached spores. It was found that the strong adsorptivity and the super hydrophobicity of MWCNTs provided an ideal platform for nisin coating. Nisin coating on MWCNT sheets decreased surface hydrophobicity, reduced spore attachment, and reduced the germination of attached spores by 3.5 fold, and further inhibited the subsequent biofilm formation by 94.6% compared to that on uncoated MWCNT sheet. Nisin also changed the morphology of vegetative cells in the formed biofilm.The results of this study demonstrated that the anti-adhesion and antimicrobial effect of nisin in combination with the physical properties of carbon nanotubes had the potential in producing effective anti-biofilm formation surfaces.     

土壤剖面部分多环芳烃源识别参数的纵向变化及成因

通过对北京和天津地区18条土壤剖面样品中PAHs的分析检测及PAHs的土柱淋滤实验模拟研究,得出了部分反映PAHs污染源的分子标志物参数在土壤剖面(或淋滤土柱)上的纵向变化特征,分析了PAHs化合物的纵向迁移作用对这些参数的影响,讨论了部分用于识别土壤中PAHs污染源的分子标志物参数的有效性。结果表明:在土壤剖面0~50 cm范围内,An/Ph,MPI1,MP/P值均有随深度增加而逐渐降低的趋势,在深层(>50 cm)不同剖面之间这些参数值差别不大;Fl/Py随深度增大呈现一定的波动性,但总体波动范围较小,且在0~40 cm变化不大;C0/(C0+C1)P/A和C0/(C0+C1)F/P值变化较为复杂。土柱淋滤实验表明,在0~50 cm范围内,部分PAHs污染源识别参数(An/178、MPI1、MP/P、C0/(C0+C1)F/P和C0/(C0+C1)P/A等)随深度的变化趋势与自然土壤剖面中的变化趋势基本一致,在深层50~100 cm范围内,这些参数值的大小逐渐与原土中的接近。表明淋滤作用(迁移过程)对表层土及土壤剖面浅部(50 cm范围内)部分PAHs污染源参数值的大小有不同程度的影响,运用PAHs污染源识别参数时,这些参数的有效性应引起足够的注意;而剖面深部(>50 cm)PAHs参数值受表层污染物组成的影响较小,其大小主要反映原土中化合物组成及成因。不同剖面受淋滤作用影响的范围存在一定的差别,这主要取决于土壤中TOC的分布特征。     

溴氰虫酰胺及其代谢物在土壤和葱中残留行为

论文建立了溴氰虫酰胺及其代谢产物J9Z38在土壤和葱中残留量的高效液相色谱三重四级杆串联质谱(LC-MS/MS)测定方法,其最小检出量分别为0.1×10-9g和0.5×10-9g;溴氰虫酰胺和J9Z38在葱和土壤样品中最低检出浓度均为0.01 mg/kg。在0.01~0.1mg/kg添加水平下,溴氰虫酰胺在土壤和葱中添加回收率分别为87.8%~99.3%和79.6%~100.3%,相对标准偏差分别为1.6%~4.6%和5.1%~7.2%;J9Z38在土壤和葱中添加回收率分别为76.0%~100.8%和77.8%~98.9%,相对标准偏差分别为5.6%~10.0%和4.2%~8.3%,均符合农药残留量分析的要求。同时,为了解100 g/L溴氰虫酰胺油悬剂在葱上施用后,溴氰虫酰胺在土壤和葱中的残留消解动态及最终残留状况,在北京和山东两地开展了大田试验研究。结果表明,溴氰虫酰胺在土壤和葱中的残留消解半衰期分别为1.3~2.6 d和2.4~4.3 d,属于易降解农药。100 g/L溴氰虫酰胺油悬剂按推荐剂量和1.5倍推荐剂量在葱中各施药3次和4次,距最后一次施药1 d时,溴氰虫酰胺在葱中最高残留量为0.13 mg/kg,表明100 g/L溴氰虫酰胺油悬剂在葱中使用后,溴氰虫酰胺在葱中的残留量较低。     

多层含水层地下水数值模型参数灵敏度分析

为分析多含水层结构地下水数值模型中水文地质参数的影响特征,文章以辽宁阜新某项目区为例,采用地下水模拟软件(GMS)建立具有4层含水层结构的地下水数值模型,并进行拟合校正,选取渗透系数、给水度进行局部灵敏度和全局灵敏度分析。结果表明:渗透系数对模型结果的影响比给水度大;参数变幅为10%时,渗透系数灵敏度是给水度灵敏度的10倍左右;就全局灵敏度而言,参数联合灵敏度大于单个灵敏度之和。