Lichen and moss bags as monitoring devices in urban areas. Part II: trace element content in living and dead biomonitors and comparison with synthetic materials

Lobes of the lichen Pseudevernia furfuracea (L.) Zopf and shoots of the moss Hypnum cupressiforme Hedw. were subjected to different treatments (water washing, oven drying, HNO3 washing, NH4-oxalate extraction) to assess the influence of vitality on accumulation efficiency, during a 6-week exposure in bags in two Italian cities, Trieste and Naples. No trend emerged between treatments, in terms of accumulation ability, for major and trace elements. Only water-washed lichens showed an increased C and N content after exposure in both cities. Element concentrations generally reached higher values in mosses than in lichens, especially for Al, Fe, and Zn (both cities), and for Cu, Mg and Na (Naples). Surface development strongly influenced accumulation capacity of the biomonitors. Quartzose and cation exchange filters revealed, on a weight basis, a poor performance. In urban environments, surface interception of atmospheric particulate seems to play a major role in accumulation, irrespective of organism vitality.     

A near real-time system for continuously monitoring airborne subtilisin-type enzymes in the industrial atmosphere

We describe the development and validation of a portable system comprising an air sampler coupled to an automated flow injection analysis device. The system is able to monitor airborne concentrations of subtilisin-type enzymes in the workplace atmosphere on a continuous basis. Sampling is in two stages: using a sampling head that is designed to mimic human respiration at approx. 1 m s(-1) at a sampling rate of 600 l min(-1). In the second stage, the captured particles are deposited by impaction from the air stream onto the inner surface of a cyclone that is continuously washed with a jet of buffer solution. Deposited particles are then washed into a reservoir from which samples are taken every 5-6 min and injected automatically into a continuous flow injection analysis system. Proteolytic enzyme in the sample passes through a bioreactor maintained at about 40 degrees C. This contains a cellulose solid phase matrix on which is covalently immobilised Texas Red-labelled gelatin as substrate. The passing enzyme partially digests the substrate releasing fluorophore that is detected down stream in a flow cell coupled to a fluorimeter. The system is calibrated using enzyme standards and the intensity of the resulting peaks from the ex-air samples is converted to airborne concentrations using a mathematical model programmed into a PC. The system has a limit of detection of 4.8 ng m(-3) and a dynamic range of 5-60 ng m(-3). The within assay precision (RSD) is 6.3-9.6% over this range. The within batch precision is 20.3% at 20 ng m(-3) and the corresponding between batch value is 19.5%. The system has been run for periods up to 8 h in the laboratory and for up to 4 h at a factory site and the values obtained compared with time-averaged values obtained from a conventional Galley sampler and in-house analysis when reasonable agreement of the results was observed. The stability of the system over 21 days of continuous use with standards injected periodically was studied. Linearity was observed for all the standard plots throughout. At the end of 21 days, after a total exposure equivalent to 2395 ng ml(-1) of Savinase, the signal due to the 5.0 ng ml(-1) standard was still easily detectable.     

Making Capacity Building Meaningful: A Framework for Strategic Action

This paper aims to give practical meaning to ‘capacity building’ through (a) identifying a suite of practical measures, such as mentoring or best practice guidelines, that have been shown to or are considered to build human, social, institutional, and economic capital; (b) placing these measures within a broader systems framework; and (c) exploring stakeholder feedback on specific measures to inform framework implementation. The 29 measures described provide actors, whether government or nongovernment, with a suite of practical investment choices for building capacity. These measures are then clustered into eight groups according to their primary purpose and placed within a systems framework. The framework provides a tool for actors with responsibilities for or an interest in capacity building to inform more holistic and strategic targeting of effort and investment. Stakeholder feedback gathered through surveys and workshops is subsequently reported to further inform implementation of specific measures within the framework’s eight groupings. The framework presented may be built upon through the identification and inclusion of further capacity building measures. The research is conducted within the context of decentralized governance arrangements for natural resource management (NRM), with specific focus on Australia’s recently formalized 56 NRM regions and their community-based governing boards as an informative arena of learning. Application of the framework is explored in the Australian setting through the identification and comparison of measures supported and most preferred by four major stakeholder groups, namely board members, regional NRM organization staff, policy/research interests, and Indigenous interests. The research also examines stakeholder perceptions of capacity issues, and whether these issues are likely to be addressed through implementing their preferred measures.

Sustainable Development and Strategic Thinking

From an economic point of view, the industrial economy is efficient to overcome situations of a scarcity of goods. From a technological point of view, the resource efficiency of the manufacturing processes of the industrial economy has been permanently improved during the last 200 years. In addition, cleaner processes have been developed. However, from an ecologic point of view, an increasing world population with increasing consumption has produced a ＂global footprint＂ which approaches the carrying capacity of the planet. A circular economy and its high-value spin-offs-a lake economy and a performance or functional service economy-can fulfil customers＇ needs with considerably less resource consumption, less environmental impairment in production and considerably less end-of-life product waste, especially in situations of affluence, when a considerable stock of physical goods and infrastructures exists. Also, in situations of a scarcity of natural resources, both energy and materials, often characterised by rapidly rising resource prices, the economic actors of a circular economy have a high competitive advantage over the actors of the industrial economy, due to much lower procurement costs for materials and energy. From a social point of view, a circular economy increases the number of skilled jobs in regional enterprises. However, the shift from a linear manufacturing economy to a circular or service economy means a change in economic thinking from flow （throughput） management to stock （asset） management： in a manufacturing economy with largely unsaturated markets, total wealth increases through accumulation as resource throughput （flow） is transformed into a higher stock of goods of better quality （but in a manufacturing economy with largely saturated markets, wealth represented by the stock of goods will no longer increase）; in a circular or service economy, total wealth increases through a smart management of existing physical assets （stock） that are adapted to changes in both technology and customer demand. This second approach not only applies to physical capital but equally to social capital, such as health and education and green GDP. To measure the social wealth of a population, it is not the amount of money spent on schools and hospitals that matters, butif this expenditure has led to a better education of the students, and a better health of the people.     

Application of GIS in the study of mass transport of pollutants by Adyar and Cooum Rivers in Chennai, Tamilnadu

Residential, industrial, commercial, institutional and recreational activities discharge degradable and non-degradable wastes that reach the coastal water through rivers and cause coastal pollution. In the present study, mass transport of pollutants by Adyar and Cooum Rivers to the coastal water as a result of land-based discharges was estimated during low tide. The lowest and the highest flow recorded in Adyar varied from 514.59 to 2,585.08×10⁶ litres/day. Similarly, the flow in Cooum River fluctuated between 266.45 and 709.34×10⁶ litres/day. The present study revealed that the Adyar River transported 53.89–454.11 t/d of suspended solids, 0.06–19.64 t/d of ammonia, 15.95–123.24 t/d of nitrate and 0.4–17.86 t/d of phosphate, 0.004–0.09 kg/d of cadmium, 0.15–1.29 kg/d of lead and 3.03–17.58 kg/d of zinc to the coastal water owing to its high discharge. Similarly, the Cooum River transported 11.87–120.06 t/d of suspended solids, 0.08–58.7 t/d of ammonia, 6.11–29.25 t/d of nitrate and 0.66–10.73 t/d of phosphate, 0.003–0.021 kg/d of cadmium, 0.02–0.44 kg/d of lead and 1.36–3.87 kg/d of zinc. A higher concentration of suspended solids was noticed in post monsoon and summer months. An increase in the mass transport of ammonia, nitrate, phosphate in summer months (April and May) and an increase in the mass transport of cadmium, lead and zinc were observed in monsoon months (October–December) in both the rivers. Thus mass transport of pollutants study reveal that Cooum and Adyar Rivers in Chennai contribute to coastal pollution by transporting inorganic and trace metals significantly through land drainage.     

Acute toxic hazard evaluations of glyphosate herbicide on terrestrial vertebrates of the oregon coast range

GOAL, SCOPE AND BACKGROUND: The degree to which dose responses of model organisms (lab rodents) can adequately predict dose responses of free-ranging wild mammals or amphibians is unknown, and the relative sensitivity of such species to body loading of a toxicant such as glyphosate is seldom reported. For relative effects of dosage, we compare sensitivity of nine wild vertebrate species to effects of high doses of glyphosate in Swiss-Webster laboratory mice both by gavage and by intraperitoneal injection. We also evaluate sublethal effects of herbicide exposure on behavior and reproductive success of one mammal and one amphibian species. METHODS: Comparisons of acute toxicity of glyphosate were made with intraperitoneal dosings of technical glyphosate isopropylamine salt to nine species of terrestrial vertebrates (five amphibians, four mammals) and compared with responses in Swiss-Webster laboratory mice. Animals collected from sites that had no recent herbicide application were allowed 7-14 days to equilibrate in captivity before treatment. RESULTS: Median lethal dose ranged from 800 to 1,340 mg kg(-1) in mammals, and 1,170 to >2,000 mg kg(-1) in amphibians, with Oregon vole being the most sensitive. White lab mice were in the middle of the mammalian range. Tailed frog, at >2,000 mg kg(-1) was the least sensitive. Calibration of IP sensitivity to oral administration by gavage indicated that roughly four times as much glyphosate must be administered to obtain a comparable estimate of lethality. Administration by gavage in highly concentrated solutions tended to cause physical injury, hence may prove less useful as a relative indicator of toxicity. When sublethal dosages were given to roughskin newts or chipmunks, mobility and use of cover appeared largely unaffected. DISCUSSION: Direct toxic effects of spraying glyphosate under normal forest management seem unlikely for the nine species examined. Nor could we detect significant indirect effects of exposure on behavior and use of cover features in two species. There may be effects on other aspects of the field biology of these animals, such as reproductive rates, which we did not investigate. Recent field data indicate that changes in habitat quality following herbicide application can result in high reproductive activity in species associated with the grasses and forbs that proliferate following field applications. CONCLUSIONS: When compared to field data on body burdens of wild mammals exposed after aerial application of glyphosate at maximum rates in forests, there seems to be a large margin of safety between dosages encountered and those causing either death or limitation of movement, foraging or shelter. RECOMMENDATIONS AND PERSPECTIVES: Margins of safety for small mammals and amphibians appear to be large under any probable exposure scenarios, however our results indicate high variability in responses among species. Uncertainty introduced into field studies from unknown sources of mortality (e.g, likely predation) must be considered when interpreting our results.     

Organochlorines and polybrominated diphenyl ethers in four geographically separated populations of Atlantic salmon (Salmo salar)

Atlantic salmon (Salmon salar) populations from four locations, two from isolated Swedish lake systems, one of the Baltic Sea and one of the North Atlantic, were analyzed to determine the concentrations and spatial variations of polybrominated diphenyl ethers (PBDEs) and organochlorines (DDT, PCB and HCH). Levels in both liver and muscle were in the same range as previously reported in Atlantic salmon, except for elevated concentrations found per lipid weight (lw) in the muscle samples of salmon from the North Atlantic ( summation PBDE 263 ng g(-1) lw, summation PCB 3262 ng g(-1) lw, summation DDT 4063 ng g(-1) lw summation HCH 131 ng g(-1)). In general, elevated concentrations in the muscles compared to the liver were observed, especially in lipid depleted migrating salmon, possibly caused by a faster lipid depletion compared with the redistribution of PBDEs, PCBs and DDTs. These findings indicated that the life stage and thereby the lipid dynamics of the fish must be considered prior to comparison based on lipid weight, especially as Atlantic salmon experience large variations in lipid content during periods of migration. The dominating PBDE congener was BDE-47, representing more than 25% in all fish. The PBDE pattern changed between locations, with a significant separation of the fish from the freshwater and marine environment when analyzed using principal component analysis.     

Mobility of dimethoate residues from spring broccoli field

Dimethoate [O, O-dimethyl-S-(N-methylcarbamoyl-methyl) phosphorodithioate] is a broad-spectrum systemic insecticide currently used worldwide and on many vegetables in Kentucky. Dimethoate is a hydrophilic compound (log KOW = 0.7) and has the potential of offsite movement from the application site into runoff and infiltration water. The dissipation patterns of dimethoate residues were studied on spring broccoli leaves and heads under field conditions. Following foliar application of Dimethoate 4E on broccoli foliage at the rate of 0.47 L acre(-1), dimethoate residues were monitored in soil, runoff water collected down the land slope, and in infiltration water collected from the vadose zone. The study was conducted on a Lowell silty loam soil (pH 6.9) planted with broccoli under three soil management practices: (i) soil mixed with municipal sewage sludge, (ii) soil mixed with yard waste compost, and (iii) no-mulch rototilled bare soil. The main objective of this investigation was to study the effect of mixing native soil with municipal sewage sludge or yard waste compost, having considerable amounts of organic matter, on off-site movement of dimethoate residues into runoff and infiltration water following spring rainfall. The initial deposits of dimethoate were 6.2 and 21.4 micro g g(-1) on broccoli heads and leaves, respectively. These residues dissipated rapidly and fell below the maximum residue limit of 2 micro g g(-1) on the heads and leaves after 10 and 14 d, respectively, with half-lives of 5.7 d on broccoli heads and 3.9 d on the leaves. Dimethoate residues detected in top 15 cm of soil (due to droplet drift and wash off residues from broccoli foliage) one day (d) following spraying, were 30.5 ng g(-1) dry soil in the sewage sludge treatment, and 46.1 and 134.5 ng g(-1) dry soil in the yard waste and no mulch treatments, respectively. Water infiltration was greater from yard waste compost treatment than from no mulch treatment, however concentrations of dimethoate in the vadose zone of the three soil treatments did not differ.     

Comparative on Causes and Accumulation of Selenium in the Tree-rings Ambient High-selenium Coal Combustion Area from Yutangba, Hubei, China

Toxic trace elements emitted during coal combustion are the main sources of air pollution. They are released into the atmosphere mainly in the forms of fine ash, smoke and flue, and thus adversely affect plant, animal and human health. Selenium is one of toxic and the most volatile in coal. Large amount of atmospheric emission of selenium, as well as selenium present and scrubber stockpiles in ash may create serious environmental problems. In the paper, on the basis of investigating the abundance and distribution of selenium in plant-rings during recent 20 years, the bioaccumulation of selenium is explained that selenium in plant, which were collected from the village of selenium-rich coal combustion, is much higher than that in plants collected away from the village of selenium-rich coal combustion. The main origins of selenium are selenium-rich coal combustion and high-selenium rock weathered. The selenium recycle by food chain and selenium will accumulate and redistribute in environments.