Characterization of organic matter in total suspended particles by thermodesorption and pyrolysis-gas chromatography-mass spectrometry

The organic matter in tropospheric aerosol plays an important role in atmospheric physical and chemical processes. The bulk of organic matter, representing a significant proportion of the total suspended particulate (TSP) mass, is bound to polymeric material whose structure and properties are largely unknown. Here we used thermodesorption gas chromatography/mass spectrometry (Td- GC/MS) to study organic compounds of low molecular mass and pyrolysis gas chromatography/mass spectrometry (Py-GC/MS) to characterize the chemical structure of macromolecules in TSP samples collected in di erent seasons from di erent sites in Guangzhou. n-Alkanes, fatty acids and nitriles were the predominant compounds in the thermodesorption products, whereas aromatics, fatty acids, nitriles and n-alkanes/alkenes were the major compounds in the pyrolysates. The results indicated that aromatics were main units in macromolecules. The fatty acids and nitriles formed from carboxylic ammonium salts were detected in both thermodesorption products and pyrolysates at a certain concentration, indicating the importance of these compounds in TSP formation. The TSP source mainly determined the occurrence of compounds in samples from urban, suburban and forest sites, whereas the TSP source and formation process maybe controlled the seasonal variation in compounds detected. High levels of nitriles in summer samples from suburban and forest sites coincide with the release of ammonium from the land and of fatty acids from vegetation at these sites.     

废旧线路板非金属材料综合利用

随着信息时代的到来,废印刷线路板处理技术日益成熟,大量的废线路板非金属粉亟需处理。从环境保护和资源回收的角度,综述了废印刷线路板非金属粉的资源化利用。     

生物质热解焦油脱除方法研究进展

生物质热解焦油的产生不仅降低了热解效率,影响设备运行,更危害着人类健康。通过介绍生物质热解焦油的特性及危害、对比分析目前各种不同除焦方法(文丘里法、旋风分离法、电捕焦法、高温裂解法和催化裂解法)的特点及应用前景,得出采用多种方法组合的形式进行联合除焦可显著提高焦油脱除效率。寻找用于湿法除焦的可再生利用的有机溶剂,开发经济、高效、长寿命的催化剂将成为生物质热解焦油脱除技术开发的重点。     

鸟粪石热解回收法去除垃圾渗滤液中氨氮的研究

采取鸟粪石热解回收,再循环利用的方法去除不同来源渗滤液中的氨氮,以降低投药成本。得到的最佳工艺条件为p H=9.5~10,药品投加量为氨氮浓度1.1倍,反应时间20 min,热解温度为100℃,热解时间4 h以上。热解鸟粪石法去除垃圾渗滤液氨氮的效果根据渗滤液本身的性质会产生较大的变化。老龄渗滤液中鸟粪石循环使用20次以后,单位质量的氨氮的去除成本降低至11.63元/kg以下;但在相同工艺条件下处理新鲜渗滤液,鸟粪石循环使用20次以后,单位质量氨氮的去除成本依然维持在35.23元/kg以上。     

污水污泥裂解目标产物及残焦促进植物生长的研究

研究了污水污泥的低温裂解特性,考察了裂解终温和干燥到一定程度后污泥含水率对裂解产物分布及产物性质的影响,并分析了裂解产物中最合适的目标产物形式.经过分析比较,最终确定以污泥裂解残焦为目标产物并通过与普通土壤混拌进行了栽种大蒜和测试大蒜重金属浓度水平的实验,并考察残焦中重金属向植物迁移的情况.结果表明,干燥到一定程度的污水污泥在550℃下裂解时残焦的产率在40%以上,其中灰分含量在60%～65%之间,富含氮、 磷、 钾.该残焦中重金属含量符合有关土地使用规定,能明显促进大蒜植株的生长,实验组平均株高比普通组高出3～4　cm;但是快速生长的大蒜植株中重金属浓度略有增加.研究表明残焦是合适的污水污泥裂解目标产物,具有土地使用的前景,能够用于促进非食用目的的植物的生长.     

丙烯腈-丁二烯-苯乙烯塑料、四溴双酚A混合物的热解实验:含溴二噁英生成研究

模拟电子垃圾热回收处理过程,将丙烯腈-丁二烯-苯乙烯塑料(ABS)、四溴双酚A(TBBPA)分别与4种金属(Cu、Fe、Zn和Ni)进行混合,在自制的加热装置内开展了不同气氛、不同温度条件下热解实验研究。对产物溴代二噁英(PBDD/Fs)检测显示,2,3,7,8-TBDF、2,3,7,8-TBDD及1,2,3,4,7,8-与1,2,3,6,7,8-Hx BDD为主要产物,其中2,3,7,8-TBDF含量最高,约占总PBDD/Fs的12%~90%。反应生成的8种2,3,7,8-PBDD/Fs浓度范围为0.05~2 082 ng·g-1。在同等实验条件下,温度升高有利于ABS塑料混合物中PBDD/Fs的生成。Cu、Fe、Zn和Ni四种金属都具有催化效应。空气、氮气气氛下热解实验显示,空气气氛下PBDD/Fs的生成量大,2种条件下生成的二噁英总量比值在0.8~99.6之间变化。无金属催化条件下此比值变化范围较小,为0.8~1.5;在金属参与条件下,此比值变化范围加大,为1.2~99.6;其中,在Cu和Fe参与下,此比值较高。各种热解条件下形成的PBDD/Fs都具有PBDFsPBDDs的特征。研究结果说明,虽然无金属参与条件下含TBBPA的ABS热解生成溴代二噁英浓度较低,但金属(如Cu等)存在时,此类污染物的浓度显著增加。     

PVC热解过程中HCl的生成及其影响因素

采用热重分析仪(TG)对聚氯乙烯(PVC)的热解特性进行研究.在不同条件下进行PVC热解制取氯化氢(HCl)实验,研究载气流量、入料量、热解时间和热解温度对氯化氢产率的影响,得出最佳热解条件;采用离子色谱(IC)、气相色谱(GC)、气质联用仪(GC-MS)对热解产物进行化学分析,揭示PVC热解制取HCl过程的反应机理.结果表明:PVC热解制取氯化氢的最佳热解条件为载气流量100mL/min、热解时间30min、入料量1.2g和热解温度400℃;PVC热解存在2个失重阶段,即260~320 ℃和390~600 ℃;随热解温度升高,焦油产率由0.95%升高到20.29%、HCl产率由25.69%升高到53.76%,而半焦产率则由54.39%下降到11.27%、气体产率变化范围为9.09%~18.97%;当热解温度低于400 ℃时,气体组分仅检测到H2、C2H4、C3H6;当热解温度高于400 ℃时,检测到的气体组分为H2、CH4、C2H4、C2H6、C3H6、C3H8;随着热解温度的升高,焦油组分中不稳定组分逐渐转化为稳定组分.PVC热解制取HCl的第1反应阶段主要是脱除HCl的链式反应,同时生成少量的苯等芳香族化合物及环烷烃等有机化合物;第2反应阶段主要为少量HCl生成、焦油的结构重整、分子重排、脱苯环和同分异构化等.     

Comparative study on the efficiency and environmental impact of two methods of utilizing polyvinyl chloride waste based on life cycle assessments

Two processes of utilizing polyvinyl chloride （PVC） waste, an incineration process and a vacuum pyrolysis process, for energy conversion were compared to determine their efficiency and environmental perfor- mance. We carried out a life cycle assessment with each of the two processes to evaluate their environmental impact and defined the goals and limits of our remit. As well, we established an inventory of PVC waste from incineration and vacuum pyrolysis based on process analysis, data collection and calculations. The results show that electrical power output per unit mass of PVC waste in the incineration process was twice as high as that of the vacuum pyrolysis process. Incineration had a larger total environmental impact potential than vacuum pyrolysis. The total environmental impact potential of PVC waste from incineration was three times higher than that from vacuum pyrolysis. Incineration of PVC disposed 300 ng. 100 kgI of dioxins and vacuum pyrolysis 98.19 ng- 100 kgI of dioxins. As well, we analyzed the data for their uncertainty with results quantified in terms of three uncertainties： basic uncertainty, additional uncertainty, and computational uncertainty. The coefficients of variation of the data were less than 25% and the quality of the inventory data was acceptable with low uncertainty. Both PVC waste disposal processes were of similar quality and their results comparable. The results of our life cycle impact assessment （LCIA） showed considerable reliability of our methodology. Overall, the vacuum pyrolysis process has a number advantages and greater potential for development of PVC disposal than the incineration process.     

燃煤电站SCR烟气脱硝还原剂尿素热解热源的选择

介绍了燃煤电站SCR尿素热解工艺,结合当前燃料价格,通过工程案例计算,对比了各种尿素热解热源的运行费用。计算结果表明,高温蒸汽加热方案的运行费用最省,但在实际应用中受到相关条件的限制;在一定条件下,燃气加热与电加热方案是工程的优选技术方案。     

番龙眼木的热分解失重及动力学研究

木材热解是木材类火灾事件的先导过程,是引起后续的阴燃、着火、燃烧和火焰蔓延等各种现象的重要因素,因此研究木材的热解非常重要。采用热重分析法对番龙眼木的热重特性及反应动力学进行研究。在空气气氛下,研究样品粒径、试验气氛和升温速率对番龙眼木热解特性的影响。对番龙眼木的热解反应过程的分析,采用Flynn-Wall-Ozawa积分法、Kissinger最大速率法和atava-esták积分法对动力学进行处理。试验得到了一些热解动力学的参数,并推断出不同温升速率下番龙眼木的动力学最概然机理方程为反应级数函数,n=4