Recovery efficiency of the hydrofluorocarbon (HFC‐134a) by activated carbons of different physicochemical properties

The adsorption characteristics of 1,1,1,2‐tetrafluoroethane (HFC‐134a) on activated carbon were investigated to evaluate the recovery efficiency of HFC‐134a by six activated carbons (two granular activated carbons (GAC1 and GAC2), one high‐surface area activated carbon (HAC), and three activated carbon fibers (ACF10, ACF15, and ACF20)). HFC‐134a adsorption on the activated carbons increased with increase in the specific surface area and pore volume of the activated carbon. The differential heat of the HFC‐134a adsorption decreased with increase in the percentage of the micropore volume to the total pore volume. The adsorption model of HFC‐134a on the activated carbon could be based on the Langmuir model. The constant a of the Langmuir plot of HAC and ACF20 is smaller than GAC1 or GAC2 and ACF10 or ACF15, respectively. The constant W_s of HAC has the largest value. The constant a was correlated to the heat of adsorption. It is concluded that the largest amount of HFC‐134a was adsorbed on HAC, and the least amount of interaction occurred between HFC‐134a and the HAC. The amount of HFC‐134a adsorbed on the activated carbons over time was applied to the Sameshima equation. The adsorption rate constant of HFC‐134a on HAC was the largest. The HAC could be suitable for the recovery of HFC‐134a.     

菌株Dyella ginsengisoli LA-4吸附Ni~(2+)的条件优化及特性研究

主要考察了菌株Dyella ginsengisoli LA-4对重金属Ni2+的吸附性能,同时,利用表面响应法对菌株Dyella ginsengisoli LA-4吸附Ni2+的条件(接种量、pH、Ni2+浓度等)进行了优化,并考察了其动力学及吸附等温曲线特性.实验结果表明,菌株Dyella ginsengisoli LA-4吸附Ni2+的最优条件为:接种量10.64 g.L-1,pH为6.50,Ni2+浓度为19.20 mg.L-1,此时的Ni2+最大去除率为99%.动力学分析表明,吸附平衡时间约为30 min,吸附可分为表面快速吸附和缓慢重金属积累两个阶段.利用Langmuir吸附模型能较好地描述菌株Dyella ginsengisoli LA-4对Ni2+的等温吸附行为,最大吸附量为25.81 mg.g-1.     

Adsorption removal of phosphate from aqueous solution by active red mud

Red mud is the waste of alumina industry and has high TiO_2 and Fe_2O_3 content which are active components for the adsorption of anion pollutants.In this study,the uptake of phosphate by red mud activated by heat treatment and acid-heat treatment was investigated. The factors influencing the adsorption were also investigated.The result showed that the red mud sample treated using acid-heat method at 80℃with 0.25 mol/L HC1 for 2 h achieved the highest phosphate removal.For the heat-activated red mud,the sample heated at 700℃for 2 h preformed better than the other heat treatment.Phosphate removal by the activated red mud was significantly pH dependent,and pH 7 was the optimal pH for phosphate removal.The adsorption fits Langmuir isotherm model well and the maximum adsorption capacities of the acid-heat activated red mud and the heat activated samples were 202.9 mgP/g and 155.2 mgP/g,respectively.