A methodological approach to internal antifire crew optimization. An oil refinery case history

This paper deals with the problem of defining the operational tasks, modelling and optimizing of antifire crew and their attempts. Unwanted events are generally modest and easily controlled in their starting phase. This obviously leads to considering that quickness and coordination enhance the possibility of successful fire control. Hence the importance that the first intervention of the factory antifire crew is supported by strong organization and efficiency. Immediate and appropriate response to emergency is essential to minimize severity of accidents, life losses, as well as the potential reduction in the plant future productivity. In approaching internal antifire crew optimization, it is convenient to distinguish a traditional inventory phase, a subsequent optimization and a graphic modelling phase. Optimization criterion is developed according to graph theory, with regard to intervention pathways and to consistency of antifire crew. The proposed graphic model provides, in an immediately readable way, the sequence of operator actions to be followed in order to cope with emergency situations.     

Natural and anthropogenic hydrocarbon inputs to sediments of Patos Lagoon Estuary, Brazil

The Patos Lagoon Estuary, southern Brazil, is an area of environmental interest not only because of tourism, but also because of the presence of the second major port of Brazil, with the related industrial and shipping activities. Thus, potential hydrocarbon pollution was examined in this study. Sediment samples were collected at 10 sites in the estuary, extracted, and analyzed by GC-FID and GC-MS for composition and concentration of the following organic geochemical markers: normal and isoprenoid alkanes, petroleum biomarkers, linear alkylbenzenes (LABs), and polycyclic aromatic hydrocarbons (PAHs). The total concentrations varied from 1.1 to 129.6 microg g(-1) for aliphatic hydrocarbons, from 17.8 to 4510.6 ng g(-1) for petroleum biomarkers, from 3.2 to 1601.9 ng g(-1) for LABs, and from 37.7 to 11,779.9 ng g(-1) for PAHs. Natural hydrocarbons were mainly derived from planktonic inputs due to a usual development of blooms in the estuary. Terrestrial plant wax compounds prevailed at sites located far from Rio Grande City and subject to stronger currents. Anthropogenic hydrocarbons are related to combustion/pyrolysis processes of fossil fuel, release of unburned oil products and domestic/industrial waste outfalls. Anthropogenic hydrocarbon inputs were more apparent at sites associated with industrial discharges (petroleum distributor and refinery), shipping activities (dry docking), and sewage outfalls (sewage). The overall concentrations of anthropogenic hydrocarbons revealed moderate to high hydrocarbon pollution in the study area.     

The use of Microtox to assess toxicity removal of industrial effluents from the industrial district of Camaçari (BA, Brazil)

The treatment efficiency, as toxicity removal, of complex effluents from the Industrial District of Cama?ari (BA, Brazil), after biological treatment with activated sludge was evaluated using Microtox. Samples of the equalised effluent (EE) were collected prior to treatment together with samples of the treated effluent (TE), which remained 24 h in the treatment plant. Rehydrated colonies of Vibrio fischeri were exposed to sequential dilutions of EE and TE to assess luminosity interference. Values for EC50 were calculated, together with the respective toxicity units. In all, twenty assays of each effluent type were carried out and the mean toxicity removal was 92.71%, while the chemical oxygen demand (COD) presented mean reduction of 83.04%. There was a variability of an order of magnitude between the Microtox results for the two types of effluents. The mean EC50 values were 2.12 for EE and 47.78% for TE. In spite of its weakness in some conditions, the Microtox system demonstrated to work adequately in assessing effluent toxicity removal in this treatment plant and therefore can be used for further toxicity removal programs.     

Evaluation of beach quality as perceived by users

Recreational beaches are strategic ecosystems for tourism and should be used in a sustainable manner. We studied three beaches in the municipality of Guaymas (NW Mexico), in order to assess their beach quality and identify key management issues. The evaluation was based on the perceptions of users concerning: (1) the user profile; (2) the recreational habits of users; and (3) the biophysical characteristics, infrastructure, services, and cleanliness of each beach. The results showed that the beaches were of different quality. The key management issues identified were the need to design and apply specific management programs for each beach, specifically in regards to improving infrastructure and services, and obtaining certification as a sustainable beach. The evaluation of the beaches as perceived by users suggests that it would be useful to assess beach quality in order to support management goals and be applicable to other beaches, both nationally and internationally.     

Equilibrium disorders in workers exposed to mixed solvents

Background. Organic solvents cause diseases of the vestibular system. However, little is known regarding the correlation between vestibular damage and exposure to organic solvents below threshold limit values. The best measure by which to evaluate vestibular disorders is static and dynamic posturography. Objective. The aim of this study was to evaluate equilibrium disorders via static and dynamic posturography in workers without clear symptoms and exposed to low doses of mixed solvents. Methods. 200 subjects were selected. Using an Otometrics device (Madsen, Denmark), all subjects endured static and dynamic posturography testing with both eyes-open and eyes-closed conditions. Results were compared with a control group of unexposed individuals. Result. Based on the obtained data, the following results can be drawn: (a) subjects exposed to mixtures of solvents show highly significant differences regarding all static and dynamic posturography parameters in comparison to the control group; (b) posturography testing has proven to be a valid means by which to detect subliminal equilibrium disorders in subjects exposed to solvents. Conclusion. We can confirm that refinery workers exposed to mixtures of solvents can present subliminal equilibrium disorders. Early diagnosis of the latter is made possible by static and dynamic posturography.     

Diffuse source apportionment of the Po river eutrophying load to the Adriatic sea: assessment of Lombardy contribution to Po river nutrient load apportionment by means of an integrated modelling approach

The source apportionment of the annual nutrient load carried by the Po river to the Adriatic sea has been studied.

An integrated modelling approach was applied to the Lombardy plain area, which covers about 34% of the Po river watershed area and accounts for about 50% of the point sources’ loads carried by the river. To extract all the information available from direct instream measurements, two different modelling tools were alternatively used. The source apportionment was investigated considering both dry and wet weather scenarios. In order to quantify the apportionment in dry-weather conditions, the Lombardy portion of the Po river basin was modelled by using the US-EPA QUAL2E model. Such a simulation allowed to assess a significant contribution (about 50% of the total dry-weather load) of a not rain-driven diffuse pollution component (i.e. groundwater, springs, lake emissaries). Moreover, to estimate the rain-driven surface runoff contribution to the instream total load, the Lombardy plain area was also modelled by means of the US-DA SWAT model. SWAT results indicate a runoff contribution to the Po river instream total load of about 10 000 t N yr⁻¹ and 1300 t P yr⁻¹ (i.e. approximately the 10–20% of the total annual Lombardy nutrient load). At the event scale (i.e. the single rainstorm event) the runoff contribution may rise up to 30–80% of the total instream load. Finally, the total annual nitrogen load at the Po basin closure was estimated for the period 1985–2001. Out of a total annual load of 140 000 t N yr⁻¹, Lombardy accounts for 43% (point plus diffuse sources). The rain-driven diffuse sources constitute the 20% of the overall total load, the point sources account for 40%, whereas the remaining 40% is mainly constituted by “dry-weather diffuse sources” (i.e. groundwater, springs, lake emissaries).     

Analysing the fate of nanopesticides in soil and the applicability of regulatory protocols using a polymer-based nanoformulation of atrazine

For the first time, regulatory protocols defined in the OECD guidelines were applied to determine the fate properties of a nanopesticide in two agricultural soils with contrasting characteristics. The nanoformulation studied had no effect on the degradation kinetics of atrazine indicating that (1) the release of atrazine from the polymer nanocarriers occurred rapidly relative to the degradation kinetics (half-lives 36–53 days) and/or that (2) atrazine associated with the nanocarriers was subject to biotic or abiotic degradation. Sorption coefficients, derived from a batch and a centrifugation technique at a realistic soil-to-solution ratio, were higher for the nanoformulated atrazine than for the pure active ingredient. Results indicate that the nanoformulation had an effect on the fate of atrazine. However, since the protocols applied were designed to assess solutes, conclusions about the transport of atrazine loaded onto the nanocarriers should be made extremely cautiously. The centrifugation method applied over time (here over 7 days) appears to be a useful tool to indirectly assess the durability of nanopesticides under realistic soil-to-solution ratios and estimate the period of time during which an influence on the fate of the active ingredient may be expected. More detailed investigations into the bioavailability and durability of nanopesticides are necessary and will require the development of novel methods suitable to address both the “nano” and “organic” characteristics of polymer-based nanopesticides.     

Chemical Characterization of Soil Used as a Deposit for Waste Originating From the Manufacturing of Products Based on Fiberglass

Companies need to follow environmental laws as they affect their manufacturing systems, waste handling, and the management of soil on their properties to ensure that their properties are either improved or altered as little as possible. Thus, the objective of this study was to evaluate the use of energy dispersive X‐ray fluorescence spectrometry (EDXRF) to determine the concentrations of elements present in the soil at a manufacturer of products based on fiberglass where wastes from production activities have been deposited on the property.     

Laminar jet modelling for hazardous area classification

A previous article dealt with turbulent jet flow modelling with the aim at developing a method for estimating the size of explosive clouds following a high Reynolds number release, within hazardous area classification scheme. The results have demonstrated that the standard EN 60079-10 (2009) largely overestimates the real size of clouds resulting from a piping or a vessel leak. On the other hand, laminar jets are possible also at moderately high Reynolds numbers; furthermore, a reduced momentum, typical of laminar jets, is often assumed in QRA studies, as a conservative assumption, due to the expected lower air entrainment and to the corresponding larger size of the flammable cloud volume. These considerations have suggested the suitability to extend the previous analysis also to laminar regime, taking into account the effect of density and viscosity differences between air and flammable gas.