不同载体生物滤池对渗滤液污染物的处理效果

以陈垃圾和煤渣作为生物滤池反应器填料,分别构建了单一陈垃圾、煤渣以及复合该2种填料的生物反应器,对渗滤液中的污染物进行了去除效果实验.结果表明,煤渣生物滤池对于渗滤液中COD和氨氮的去除效果高于陈垃圾滤池,但是总氮的去除率低于陈垃圾.复合填料滤池对于负荷和低温变化具有较好的耐受能力.电镜观察和微生物计数结果表明,2种载体适合微生物挂膜生长.粒径分析结果表明,2种载体的颗粒粒径组成对于滤池通透性能以及污染物去除有重要影响.     

汶川地震后四川省安县黄洞子沟泥石流特征

2008年5月12日汶川地震诱发了黄洞子沟流域规模巨大的大光包滑坡,部分滑体前冲堆积于沟道内,直接为后期泥石流的形成提供了丰富的松散固体物质,改变了黄洞子沟泥石流形成条件,使黄洞子沟从一条非泥石流沟演变成了一条高频泥石流沟。震后黄洞子沟几乎每年雨季都会暴发不同规模的泥石流,其中以2013年"7·09"泥石流灾害规模和危害最大。本文着重分析了黄洞子沟泥石流形成特征,并从地形、降水和地质三个方面将黄洞子沟和文家沟进行对比,得出了物源堆积体颗粒粒径与泥石流形成的关系。     

上流式斜流沉淀去除率公式的理论推导

结合斜流沉淀结构的特点，分析了流道内液芬布对颗粒沉淀过程的影响；污水中颗粒粒径分布对去除率的影响，从而理论上推导上流式斜流沉去除率的计算公式     

确定复杂形状旋转体拉延毛坯尺寸的计算机AutoCAD方法

提出了一种基于AutoCAD软件的确定复杂形状旋转体拉深毛坯直径的计算机方法,它操作严谨、结果准确,比原有的3种方法简捷、快速,具有良好的推广应用价值。     

双锥度锥形模设计

在冷镦生产中 ,当零件的头部变形较大时 ,通常采用大料及缩径的加工方法。使用该方法冷镦凹模寿命低。通过理论分析和大量的实验后 ,成功地采用双锥度锥形模加普通凹模的生产方式 ,生产头部变形较大的零件 ,取得了良好的效果 ,大大降低了零件的生产成本。     

Physicochemical characteristics of carbonaceous adsorbent for dioxin-like polychlorinated biphenyl adsorption

It has been known that dioxin-like polychlorinated biphenyls (DL-PCBs) are present in almost all types of environments worldwide. Activated carbon treatment has been expected for the removal of DL-PCBs because it is a simple and low-cost removal technology. In the present study, the physicochemical properties of activated carbon were investigated to identify the characteristics of 16 different types of activated carbon on adsorption properties for DL-PCBs. To accomplish this, micropore volume, and pore diameter were calculated by t-plot analysis and the mesopore volume was analyzed by the Barrett-Joyner-Halenda (BJH) method. In addition, the Brunauer-Emmett-Teller (BET) surface area, pH, metal elements, and surface acid functional groups were analyzed. Then, adsorption experiments using DL-PCB in hexane solution were conducted, and the relationship between adsorption and physicochemical properties of activated carbon was investigated. The results showed that activated carbons having a surface area of 700-1200 m² g⁻¹ and micropores with diameters of about 0.7-0.8 nm exhibited high activity for the adsorption of PCBs. The results also clearly showed that the mesopore volume of activated carbon influenced the adsorption rate and the equilibrium adsorption.     

Tree and stand growth of mature Norway spruce and European beech under long-term ozone fumigation

In a 50- to 70-year-old mixed stand of Norway spruce (Picea abies (L.) Karst.) and European beech (Fagus sylvatica L.) in Germany, tree cohorts have been exposed to double ambient ozone (2×O₃) from 2000 through 2007 and can be compared with trees in the same stand under the ambient ozone regime (1×O₃). Annual diameter growth, allocation pattern, stem form, and stem volume were quantified at the individual tree and stand level. Ozone fumigation induced a shift in the resource allocation into height growth at the expense of diameter growth. This change in allometry leads to rather cone-shaped stem forms and reduced stem stability in the case of spruce, and even neiloidal stem shapes in the case of beech. Neglect of such ozone-induced changes in stem shape may lead to a flawed estimation of volume growth. On the stand level, 2×O₃ caused, on average, a decrease of 10.2 m³ ha⁻¹ yr⁻¹ in European beech.     

Experimental research of flow rate and diffusion behavior of nature gas leakage underwater

In order to assess the potential risk of pipeline underwater leakage, a self-designed experimental setup is carried out to study the gas release rate and dispersion behavior in different release scenarios. A transparent organic glass tank with dimension of 1 m × 0.5 m × 0.5 m (height × width × length) was placed in a wind tunnel. The release pipeline made by stainless-steel with diameter of 25 mm were used to simulate for variation release depth. The different size and shape of leakage orifices in 1 mm, 3 mm, 5 mm in round and 3.5 × 2 mm, 7 × 1 mm in rectangle were designed for comparison. The medium of methane gas was released from the controllable cylinder. The variation parameters of flow rate and pressure were measured by a flow meter and pressure gauge respectively. A high speed camera was employed to recorded the phenomenology of dispersion characteristics and breakup process for a wide range of orifice size in the time-resolved images. The dynamic plume diameter on water surface was measured by a Vernier caliper placed above the water tank. The considered factors including orifice size, leakage pressure and water depth effect on gas flow rate and dispersion behavior was quantitative investigated. The fitting correlation between the gas flow rate and variation parameters can provide fundamental information for evaluation the hazard consequences of gas release in engineering application.