Impact of anions on the heavy metals release from marine sediments

Marine sediments from Lianshan Bay in Huludao, China, were studied in laboratory. A series of simulated experiments were carried out to investigate the influences of three kinds of anions CL^-, SO4^2- and HCO3^- on the release ofCd, Pb, Cu and Zn from the sediments. The results showed that the sequences about the impact of the three anions were Cl^-〉HCO3^-〉SO4^2＋. The release potential of heavy metals in the presence of each anions was in the following order： Cd≥Cu 〉Zn≈Pb. The correlations were positive between CI content and the quantity of Cd released from the marine sediment, whereas there was no significant relationship between CI content and amount of Cu and Zn released. For SO4^2- and HCO3^-, the release of the heavy metals from marine sediments was not obvious.     

Decomposition of silicate minerals by Bacillus mucilaginosus in liquid culture

The extraction of K⁺ and SiO₂ from silicate minerals by Bacillus mucilaginosus in liquid culture was studied in incubation experiments. B. mucilaginosus was found to dissolve soil minerals and mica and simultaneously release K⁺ and SiO₂ from the crystal lattices. In contrast, the bacterium did not dissolve feldspar. B. mucilaginosus also produced organic acids and polysaccharides during growth. The polysaccharides strongly adsorbed the organic acids and attached to the surface of the mineral, resulting in an area of high concentration of organic acids near the mineral. The polysaccharides also adsorbed SiO₂ and this affected the equilibrium between the mineral and fluid phases and led to the reaction toward SiO₂ and K⁺ solubilization. These two processes led to the decomposition of silicate minerals by the bacterium.     

某市给水管网中铁释放现象影响因素与控制对策分析

针对某市管网水中铁浓度的变化规律进行了系统的研究,确定了管垢向管网水中释放出的铁是管网水中铁超标的主要原因.研究中发现铸铁管和镀锌钢管中管垢的主要化学组分为铁.在给水管网中,管网水的溶解氧和余氯浓度低时,对应的管网水中铁释放现象严重,其原因是还原条件使管垢表面的致密钝化层被破坏,造成二价铁的大量释放.根据试验结果提出了给水管网中铁释放和“红水”现象的控制对策.     

Relation of lead adsorption on birnessites with different average oxidation states of manganese and release of Mn^2＋/H^＋/K^＋

The characteristics of Pb2+ adsorption on the surface of birnessites with different average oxidation states (AOS) of Mn, synthesized under acidic and alkali conditions, were investigated. The results indicated that the amount of adsorbed Pb2+ increased with the increase of Mn AOS in birnessites. The amount of Pb2+ adsorbed positively correlated with the amount of released Mn2+, H+, and K+ (r = 0.9962 > 0.6614, n = 14, α = 0.01). The released Mn2+, H+, and K+ were derived mostly from the corresponding catio...     

Uncertainties in QRA: Analysis of losses of containment from piping and implications on risk prevention and mitigation

Quantitative Risk Assessment (QRA) is commonly used in the chemical industry to support decision-making. Common practices are based on standard methods, such as fault tree, event tree, etc.; in this frame, risk is a function of frequency of events (probability) and associated consequences (negative outcomes), but relevant uncertainties often are not properly taken into account in the derived results. This paper presents the application of an extended risk analysis of loss of containments for a case-study with the following aims: firstly, the uncertainties related to the results of the analysis, which derive from assumption in the application of the standard models, are qualitatively assessed; secondly the application allows evaluating the impact of the uncertainties on the trustworthiness of the results and, finally, commenting about their use in the risk prevention and mitigation.     

Recent application of Computational Fluid Dynamics (CFD) in process safety and loss prevention: A review

In recent years, significant progress has been made to ensure that process industries are among the safest workplaces in the world. However, with the increasing complexity of existing technologies and new problems brought about by emerging technologies, a strong need still exists to study the fundamentals of process safety and predict possible scenarios. This is attained by conducting the corresponding consequence modeling and risk assessments. As a result of the continuous advancement of Computational Fluid Dynamics (CFD) tools and exponentially increased computation capabilities along with better understandings of the underlying physics, CFD simulations have been applied widely in the areas of process safety and loss prevention to gain new insights, improve existing models, and assess new hazardous scenarios. In this review, 126 papers from 2010 to 2020 have been included in order to systematically categorize and summarize recent applications of CFD for fires, explosions, dispersions of flammable and toxic materials from accidental releases, incident investigations and reconstructions, and other areas of process safety. The advantages of CFD modeling are discussed and the future of CFD applications in this research area is outlined.     

Morphological characteristics of flashing jet throughout superheated liquid release

Many release problems involve two-phase releases of hazardous materials of superheated liquids with high energy into the atmosphere. Such accidents are accompanied by violent phase transition and form catastrophic flashing jets. In this work, experimental and theoretical analyses were conducted to investigate dynamic characteristics of flashing jet morphology and their dependence on pressure-decay dynamics under different storage pressures, superheats, and nozzle diameters. Flashing jet morphology and angle throughout two-phase releases were captured by a high-speed camera, and the corresponding source pressure in the superheated liquid tank was measured simultaneously. Results show that three typical phases, expansion, stabilization, and decay, are characterized throughout two-phase release based on the evolution of flashing jet morphology. The jet initially expands gradually due to the enhancement of phase transition intensity, and then keeps stable when the intensity reaches its maximum, and terminally decays rapidly due to the depletion of superheated liquid. Phase transition intensity at the nozzle exit is mainly controlled by the pressure-decay dynamics. Bubbles nucleation inception sites gradually move upstream of the nozzle during the pressure decay process increasing the phase transition intensity. The increase of storage pressure, superheat and nozzle diameter promotes the mechanical and thermodynamic effects on the jet breakup. The significant increase of mechanical and thermodynamic effects effectively accelerates droplets evaporation and further affects flashing jet morphology.     

过硫酸盐缓释材料释放过程模型构建

为预测评估过硫酸盐缓释材料的释放性能,对释放过程模型的构建以及模型的验证进行了研究。借助微积分思想,从材料体的概化分割、初始条件设定、每个小单元的状态标定、各个小单元中过硫酸钾的迁移变化量以及材料最外层释放过硫酸盐的量5个方面构建过硫酸盐缓释材料释放模型,利用Excel-VBA编程实现其释放过程模拟。采用欧盟标准NEN7375测试过硫酸盐缓释材料释放性能并获得模型参数。通过输入相关模型参数得到过硫酸盐动态迁移过程及其释放特征曲线,并利用实测数据与模拟数据进行拟合校验。结果表明,模型模拟值与实测值拟合较好,平均误差为1.88%,表明该模型设计合理,能够准确模拟过硫酸盐缓释材料释放过程,可作为缓释材料优化设计工具。     

Confidence-based quantitative risk analysis for offshore accidental hydrocarbon release events

Quantitative risk analysis (QRA) has been widely used to conduct the assessment of offshore accidental risks. However, the accuracy and validity of QRA is significantly affected by uncertainties when subjective judgments are involved. Therefore, it is unrealistic to determine the probability of a hazardous event by using one single explicit value when safety experts have a relatively low confidence level in their judgments. This paper proposes a new methodology for incorporating uncertainties into conventional QRA using the concept of confidence level. Offshore hydrocarbon release hazards are focused on and a barrier and operational risk analysis (BORA-Release) method is selected as the basic model to illustrate the proposed methodology. A left–right (L–R) bell-shaped fuzzy number is employed and its membership curve is able to control its shape to represent different confidence levels. As to the complex geometry of the bell-shaped fuzzy number, an α-cut operation is introduced to conduct the arithmetic operations of the fuzzy number, and a defuzzification method with total integral value is chosen to match the α-cut operations and acquire complete information for the fuzzy numbers. In the meantime, an optimism index is used to describe the attitude of the decision-maker. One case study is provided in this paper to demonstrate the implementation of this method.     

水稻田的甲烷释放特性及其生物学机理

本文报导采用土柱法和田间原位法研究渍水稻田甲烷释放特性的结果。不同生育期的测定表明,早稻以分蘖盛期时释放量最大,以后逐渐减少,晚稻从分蘖始期起逐渐增加,至分蘖盛期、末期时达到最大,随后在孕穗期急剧减少,至生长后期又有所回升。以原位法测定表明,晚间和上午释放的甲烷量较多,中午几乎无甲烷释放,下午又有少量释放。不同施肥区稻田甲烷释放量明显不同,以施猪粪有机肥区为最高,次为施尿素无机氮区,不施肥区最低。但各施肥区水稻不同生育期的甲烷释放趋势完全一致,以分蘖期释放量最大,稻田释放的甲烷主要是稻植株释放的,可占总释放量的85％以上。行株间土壤释放的量不多。田间水释放极少,就植株而言,甲烷释放部位主要是在与土壤密切结合的未扰动的根基和根系部位,水面下茎秆白色部分和水上绿色部分几乎无释放。根系也主要是靠近根基的上半部分,根尖部位甲烷形成活性明显小得多。且研究表明,产甲烷细菌附存于根表而不进入根内组织。根际土壤中产甲烷细菌、厌氧性纤维素分解细菌和甲烷氧化细菌的数量以及总挥发有机酸含量都明显高于和行间土壤。