Designing ambient particulate matter monitoring program for source apportionment study by receptor modeling

Particulate matter (PM) receptor modeling requires specific intensive input data that is always a challenge to produce cost effectively. A well-designed monitoring program is important to collect such PM ambient data in urban areas with diverse and densely distributed sources. This paper presents a general framework for designing such a monitoring program while emphasizing appropriate quality assurance and quality control elements that are particularly applicable where limited resources are available. Topics for discussion include selection of monitoring sites, sampling and analytical techniques, and the uncertainty estimation for ambient concentration input data. The design framework is illustrated by a case study of a monitoring program for PM source apportionment in the Bangkok Metropolitan Region in which 24-h fine and coarse PM samples were collected using two collocated dichotomous samplers. Comparison between black carbon measurements by Smoke Stain reflectometry and Thermal Optical Transmittance method is highlighted.     

Modeling groundwater flow and its associated environmental problem in a lowland coastal plain: a first step towards a sustainable development plan

Groundwater is an important resource in the alluvial coastal lowland plains. In the Shiroishi lowland plain, southwestern Kyushu Island of Japan, land subsidence due to groundwater development has long been recognized as an environmental issue. Land subsidence can have several negative economic and social implications. In this study, an integrated numerical groundwater and land subsidence model, which combines a three-dimensional numerical groundwater flow model and a one-dimensional soil consolidation model, was used to simulate the dynamic groundwater flow and ground subsidence due to pumping. On the other hand, a groundwater optimization model was also formulated to search for an optimal safe yield of groundwater pumping without violating physical, environmental, social-economic constraints. The model results reveal that groundwater levels in the aquifers greatly vary from season to season in response to varying climatic and pumping conditions. Consequently, land subsidence has rapidly occurred throughout the area with the central prone in Shiroishi plain. The study also proposes a countermeasure against subsiding process in the area by means of numerical models. The optimization model result suggests that pumping can be increased in the northern part of the study area without leading to significant land subsidence.     

School-based disaster risk reduction education in primary schools in Da Nang City,Central Vietnam

The concept of school-based disaster risk reduction (DRR) education has increasingly become popular as greater emphasis is placed on the role of schools in reducing risks and building the resilience of the education system. This paper discusses the variations in the implementation of DRR education among primary schools in different areas including urban, rural, mountainous, plain and coastal areas in Da Nang City, Central Vietnam. For rural schools, similarities in the implementation of DRR education are observed and schools in both rural plain and rural mountainous areas stress the provision of disaster-related training. In addition, improvement of school buildings and external relationship is important for the resilience of urban schools. Specifically, for schools in urban coastal areas, school location and structure are significant, while for schools in the urban plain lands, enhancement of collaboration with their community has the most potential to contribute to the resilience of a school. From that, this research proposes that leadership and prioritization are key factors in helping schools to manage internal and external resources to efficiently overcome challenges and effectively promote DRR education towards the enhancement of schools’ resilience.     

Steel slag quality control for road construction aggregates and its environmental impact: case study of Vietnamese steel industry—leaching of heavy metals from steel-making slag

Environmental Science and Pollution Research - Steel slag is an industrial by product of steel manufacturing processes and has been widely utilized within civil and construction materials for road...     

Ionomics and metabolomics analysis reveal the molecular mechanism of metal tolerance of Pteris vittata L. dominating in a mining site in Thai Nguyen province,Vietnam

Environmental Science and Pollution Research - This study aims to find the interaction between ionome and metabolome profiles of Pteris vittata L., an arsenic hyperaccumulator plant, to reveal its...     

Optimizing the performance of phase-change materials in personal protective clothing systems.

Phase-change materials (PCM) can be used to reduce thermal stress and improve thermal comfort for workers wearing protective clothing. The aim of this study was to investigate the effect of PCM in protective clothing used in simulated work situations. We hypothesized that it would be possible to optimize cooling performance with a design that focuses on careful positioning of PCM, minimizing total insulation and facilitating moisture transport. Thermal stress and thermal comfort were estimated through measurement of body heat production, body temperatures, sweat production, relative humidity in clothing and subjective ratings of thermal comfort, thermal sensitivity and perception of wetness. Experiments were carried out using 2 types of PCM, the crystalline dehydrate of sodium sulphate and microcapsules in fabrics. The results of 1 field and 2 laboratory experimental series were conclusive in that reduced thermal stress and improved thermal comfort were related to the amount and distribution of PCM, reduced sweat production and adequate transport of moisture.     

Techno policy aspects and socio-economic impacts of eco-industrial networking in the fishery sector: experiences from An Giang Province,Vietnam

Eco-industrial networking is considered as a new approach for businesses to improve their competitiveness, economic viability and human and ecosystem health. A cyclic material flow with alternative usage of all materials in the loop is an essential feature of an eco-industrial network. While eco-industrial networking has been primarily applied on the high-tech sector, this paper attempts to apply the principles on the fishery sector of An Giang, a Vietnamese province in the Mekong River Delta. An Giang Province has its own market share in the trade of Tra and Basa fish. The industries in the value chain of Tra and Basa are in a situation that forces them to improve their competitiveness to retain the market share. It was found that forming an eco-industrial network and recruiting new businesses to utilize all materials in the process provides additional revenue apart from reducing waste disposal concerns. This paper details the current market situation, the issues faced and material flow patterns and presents a feasible eco-industrial network. The results of the study indicate that the eco-industrial network creates positive impacts in terms of increased competitiveness, improved socio-economic conditions and cleaner environment.     

Toxicity of imidazolium salt with anion bromide to a phytoplankton Selenastrum capricornutum: effect of alkyl-chain length

Room-temperature ionic liquids are regarded as environmentally benign alternatives to volatile organic solvents. However, the product designs for this promising group of compounds should take account, not only the technological needs, but also the eco-toxicological hazards. Therefore, this study aimed to evaluate the toxicity of some important ionic liquids on the growth of the freshwater alga, Selenastrum capricornutum. The ionic liquids examined in this study included 1-propyl-3-methylimidazolium [PMIM], 1-butyl-3-methylimidazolium [BMIM], 1-hexyl-3-methylimidazolium [HMIM] and 1-octyl-3-methylimidazolium [OMIM] with a bromide anion. The susceptibility of alga to ionic liquids was strongly dependent on the alkyl-chain length. According to our results, a longer alkyl-chain resulted in stronger inhibition of algal growth. In general, the toxicity could be summarized as decreasing in the following order: [OMIM]>[HMIM]>[BMIM]>or=[PMIM]. Among the ionic liquids examined, [OMIM] [Br] was found to be most toxic to S. capricornutum, with EC(50) values ranging from 26.3 microM to 54.9 microM after an incubating time of 96 h. Although [BMIM] [Br] and [PMIM] [Br] was relatively less toxic than [OMIM] and [HMIM], their toxicity increased as increasing the incubation time from 48 h to 96 h. This fact indicates that these kinds of ionic liquids may become more toxic after being released and contacted to freshwater ecosystem.     

Phytoremediation potential of indigenous plants from Thai Nguyen province, Vietnam

This study was focused on determining Arsenic (As), Lead (Pb), Cadmium (Cd) and Zinc (Zn) in 33 indigenous plants and 12 soil in-situ plant samples in Thai Nguyen Province, Vietnam. The results showed that the soils of surveyed mining areas contained 181.2- 6754.3 mg kg(-1) As, 235.5-4337.2 mg kg(-1) Pb, 0.8- 419 mg kg(-1) Cd and 361.8-17565.1 mg kg(-1) Zn depending on the characteristics of each mining site. These values are much higher than those typical for normal soil. The heavy metal uptake into shoots and roots of 33 indigenous plant species was also determined. Two species of the plants investigated, Pteris vittata L. and Pityrogramma calomelanos L. were As hyperaccumulators, containing more than 0.1% heavy metals in their shoots. Eleusine indica L., Cynodon dactylon L., Cyperus rotundus L. and Equisetum ramosissimum (Vauch) accumulate very high Pb (0.15-0.65%) and Zn (0.22-1.56%) concentration in their roots. Additional experiments to clarify the potential of six these plants as good candidates for phytoremediation of heavy metal pollution soil are being carried out in our laboratory.