不同老化时间的TiO_2纳米颗粒对玉米生长的影响

为探讨老化时间对TiO_2纳米颗粒(nanoparticles,NPs)生物有效性的影响,研究了不同老化时间的Ti O_2NPs(0~120 d)对玉米幼苗生长的影响、在玉米体内的吸收及其在植株不同部位的存在位点等。研究发现,不同浓度的TiO_2NPs(1 000 mg·kg~(-1)和2 000 mg·kg~(-1))加入到土壤中,对玉米幼苗干鲜重没有明显的影响,但老化时间小于60 d时,对玉米幼苗株高有一定的抑制效应,老化60 d之后,随着老化时间的继续延长,毒性逐渐降低,最后趋于稳定。老化60 d时,TiO_2NPs处理的玉米幼苗根冠增大,玉米幼苗体内产生H2O_2的累积。在Ti O_2老化土壤中生长的玉米幼苗根系和地上部均有Ti的累积,1 000 mg·kg~(-1)的TiO_2NPs在玉米幼苗根部的生物累积系数达到35.4%,在地上部为13.6%,在玉米植株体内的转运系数为0.38;通过TEM观察,TiO_2NPs可以进入到玉米幼苗体内,并存在于根细胞的细胞质和叶绿体膜上,在叶片细胞的液泡和细胞核中也发现有TiO_2NPs的存在。上述研究结果为客观评价TiO_2NPs的生态风险提供了有用信息。     

太阳光催化氧化工艺对藻源含氮有机物的降解研究

利用小试试验研究了太阳光/TiO2体系对铜绿微囊藻细胞内的溶解性有机氮(DON)的氧化降解过程,考察了氧化降解过程中总可溶性蛋白、多糖、UV254等指标的变化,分析了其作用机理.结果表明,7h处理后,太阳光/TiO2体系对水样中的DON降解率为29%,且降解过程中TN含量基本没有变化,而NH4+和NO3-的浓度明显增加;氧化过程中,总可溶性蛋白和多糖的含量明显减少,去除率达48.6%和54.5%.水样的浑浊度、UV254和DOC也有不同程度的去除.     

等离子改性CNT/TiO2电极吸附去除水中苯酚的研究

利用电感耦合空气等离子体对涂覆法制备的CNT/TiO2复合电极进行射频放电改性处理.复合电极的表面形貌、润湿性及元素成分分别通过扫描电镜(SEM)、接触角测试仪、x射线光电子能谱(XPS)进行了表征.结果表明,改性后有利于苯酚吸附,电极比表面孔隙、亲水性、TiO2及含氧官能团均得以增加;循环伏安测试(CV)表明改性后电极比电容提高54%;改性后复合电极对苯酚的吸附量较改性前提高了45%.且等离子改性CNT/TiO2电极对苯酚的去除量随电压、苯酚初始浓度的增加而增加,吸附过程符合准二级动力学方程,吸附等温线符合Langmuir等温吸附模型.     

不同煅烧温度制备TiO_2及光解2-氯苯甲酸

为了考察煅烧温度对TiO2结构和光催化活性的影响,以酞酸丁酯作为前驱体,利用溶胶-凝胶法在不同煅烧温度下制备TiO2,并用亚甲基蓝测试其光催化活性。TG热重分析表明,450~700℃时TiO2有晶型变化,XRD表征说明,TiO2晶型受煅烧温度影响显著,其中450~600℃煅烧制备的TiO2为锐钛矿型,650℃煅烧时TiO2出现金红石晶型;亚甲基蓝光解实验结果表明,煅烧温度显著影响TiO2的光催化活性,其中,450~600℃煅烧TiO2对亚甲基蓝光解效果较好,光降解2.5h后降解率高达95%~97%;550℃煅烧制备的锐钛矿型TiO2对2-氯苯甲酸有一定光解催化效果,紫外光解4h后降解率高达80%左右,光解过程符合零级动力学模式。     

Effect of metal ion-doping on characteristics and photocatalytic activity of TiO2 nanotubes for removal of humic acid from water

The effect of ion-doping on TiO₂ nanotubes were investigated to obtain the optimal TiO₂ nanotubes for the effective decomposition of humic acids (HA) through O₃/UV/ion-doped TiO₂ process. The experimental results show that changing the calcination temperature, which changed the weight fractions of the anatase phase, the average crystallite sizes, the Brunauer-Emmett-Teller surface area, and the energy band gap of the catalyst, affected the photocatalytic activity of the catalyst. The ionic radius, valence state, and configuration of the dopant also affected the photocatalytic activity. The photocatalytic activities of the catalysts on HA removal increased when Ag⁺, Al³⁺, Cu²⁺, Fe³⁺, V⁵⁺, and Zn²⁺ were doped into the TiO₂ nanotubes, whereas such activities decreased as a result of Mn²⁺- and Ni²⁺-doping. In the presence of 1.0 at.% Fe³⁺-doped TiO₂ nanotubes calcined at 550°C, the removal efficiency of HA was 80% with a pseudo-first-order rate constant of 0.158 min⁻¹. Fe³⁺ in TiO₂ could increase the generation of ·OH, which could remove HA. However, Fe³⁺ in water cannot function as a shallow trapping site for electrons or holes.     

Efficient dechlorination of 2,4-dichlorophenol in an aqueous media with a mild pH using a Pd/TiO2NTs/Ti cathode

In this study, palladium-loaded titania nanotubes was fabricated on a titanium plate (Pd/TiO₂NTs/Ti) for efficient electrodechlorination of 2,4-chlorophenol with a mild pH condition. The nature of Pd/TiO₂NTs/Ti electrodes was characterized by field-emission scanning electron microscope (FESEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and cyclic voltammetry (CV) techniques. The characterization results indicated the generation of Pd⁰ nanoparticles which were evenly dispersed on titania nanotubes arrays on the Pd/TiO₂NTs/Ti surface. An effective degradation efficiency of up to 91% was achieved within 60 min at cathode potential of −0.7 V (vs. SCE) and initial pH of 5.5. The effects of the applied cathode potential and initial pH on the degradation efficiency were studied. A near neutral condition was more favorable since very low and very high pHs were not conducive to the dechlorination process. Furthermore, the intermediates analysis showed that the Pd/TiO₂NTs/Ti electrode could completely remove chlorine from 2, 4-dichlorophenol since only phenol was detected as the byproduct and the concentration of released chlorine ions indicated near-complete dechlorination. This work presents a good alternative technique for eliminating persistent chlorophenols in polluted wastewater without maintaining strong acidic environment.     

碘铈共掺杂纳米TiO_2的制备及可见光光催化性能

采用溶胶凝胶法制备了不同原料比例碘铈共掺杂纳米TiO2催化剂,运用X射线光电子能谱（XPS）,X射线衍射（XRD）,透射电镜（TEM）等检测手段对催化剂进行了初步表征.结果表明,经过450℃煅烧处理得到的TiO2、铈掺杂TiO2以及碘铈共掺杂TiO2催化剂均为锐钛矿相,掺杂的Ce和I原子可能以I—Ce—O及O—Ti—I等键合方式进入TiO2晶格内部,此外,I-Ce离子共掺杂能有效降低TiO2表面的电子-空穴对的复合.以染料罗丹明B（Rhodamine B,RhB）和无色小分子水杨酸（Salicylic acid,SA）为降解的目标化合物,发现碘铈共掺杂的最佳物质的量之比为nCe∶nI∶nTi=0.04∶0.05∶1,即I0.05Ce0.04TiO2催化剂在可见光照射下（λ〉420 nm）降解目标化合物其光化学活性明显优于单掺铈的TiO2催化剂和未掺杂的TiO2.该催化反应涉及到空穴氧化,并伴有羟基自由基（.OH）、超氧自由基（O2.-）及H2O2等氧化物种的产生.     

溶胶粉末复合浸渍法制备颗粒状SCR脱硝催化剂的特性

针对以V₂O₅-WO₃/TiO₂为成分的颗粒状SCR脱硝催化剂在制备过程中存在的有效组分加载均匀性等问题,尝试了利用偏钛酸溶胶作为载体的催化剂生产方法.利用粉末/溶胶复合浸渍方式设计出4种催化剂的制备方法并分别制得样品.通过在不同温度条件下样品对烟气中NO_x成分去除效能的性能测试,以及进行相关的微观表征分析,研究比较了不同制备方式对催化剂特性的影响规律,旨在探索出一种合理、高效的催化剂制备工艺.结果表明:利用偏钛酸溶胶作为载体,同步浸渍加载WO₃和V₂O₅ 2种组分,相比传统的粉末浸渍和两步浸渍方式,该方法能够使浸渍组分在载体表面获得较高的覆盖率,并有效避免了浸渍组分溶出和重结晶现象的发生,所制得的催化剂样品具有较高的脱硝效率.      

加压溶氧光催化反应器降解活性艳红X-3B

探讨了加压溶氧条件对活性艳红X-3B的降解与脱色的作用,考察了加压条件下pH值,TiO2投加量及温度等对活性艳红X-3B降解的影响.结果表明,加压条件与常压条件下变化趋势基本一致.加压充氧有助于活性艳红X-3B的降解与脱色,加压充N2对反应基本没有作用,说明增加活度不是关键因素,加压使溶液中溶解氧增加是导致活性艳红X-3B降解与脱色的主要原因.光催化降解过程,发色基团最易被打碎,60min内降解效果显著,而萘环和苯环降解效果不十分明显.CODCr的降解与色度的褪除成正相关,脱色率越高,COD的降解率也越高.