海岸带表层沉积物中磷的地球化学特征

通过连续提取法对莱州湾主要入海河流及近岸海域表层沉积物中5种形态磷进行了定量分析.结果表明,近海沉积物自生钙结合磷含量(45.6%)高于河流(37.3%),而铁结合磷(Fe-P)含量(18.2%)却低于河流(31.3%).在近海,可交换或弱结合磷含量和粉砂比例呈正相关,表明该形态磷主要吸附于细粒粉砂.河流沉积物Fe-P与Fe浓度呈显著正相关(P0.01),表明河流沉积物Fe-P分布受沉积物活性铁含量的控制.河口处Fe-P普遍低于相应河流,这可能与海相泥沙输入及河口厌氧区硫酸盐还原或硫化物累积有关.近海沉积物总可提取态磷平均浓度总体呈现出由海洋向河口方向递减的趋势.     

模拟环境条件下δ-MnO_2氧化As(Ⅲ)的搅拌流动动力学特征

采用搅拌流动法研究了酸性水钠锰矿及水羟锰矿2种δ-MnO2矿物氧化As(Ⅲ)的动力学过程,构建了可用于多相体系的搅拌-流动氧化还原反应动力学模型.经过As吸附量的校正后,该模型对酸性水钠锰矿及水羟锰矿氧化As(Ⅲ)动力学数据拟合度分别为0.980和0.951,模型拟合得到pH 7时2种矿物单位比表面上氧化As(Ⅲ)的初始反应速率常数k分别为0.131,0.014min-1·m-2.相比而言,该速率常数明显高于批量法得到的表观速率常数kobs,0.021,0.001min-1?m-2更接近真实的化学动力学参数.搅拌流动法与批量法得到的不同矿物的速率常数大小趋势一致,即尽管酸性水钠锰矿对As(Ⅲ)的氧化率低于水羟锰矿,单位比表面上酸性水钠锰矿氧化As(Ⅲ)初始反应速率却远高于水羟锰矿.反应过程分析表明,反应初始阶段,As(Ⅲ)的吸附为主要限速步骤;而随着反应的进行,矿物表面反应位点逐渐钝化或减少,反应位点数量成为限速步骤.     

Electro-Fenton法处理印染废水应用研究进展

Electro-Fenton法是利用电解的方法产生Fe2+和H2O2,新生的Fe2+和H2O2作用产生·OH。作为一种新兴的废水处理技术,在处理难降解有机废水方面,国内外已开展了广泛的研究,对于处理高浓度难降解有机废水效果良好。阐述了Electro-Fenton法的发展、分类、反应机理及其在印染废水处理中的应用研究现状,并指出Electro-Fenton法存在的主要问题和今后的发展方向。     

生物法处理海上油田含聚生产污水研究报告

应用"倍加清"特种微生物技术,结合"气浮+生化+固液分离"的处理工艺,以中海油绥中SZ36-1陆上终端含聚污水为水质样本,研究生物法处理海上油田含聚生产污水的效果。结果表明,该工艺处理后出水可达"1.5.2"的水质标准,远优于"10.10.3"的注入水质指标要求,并确定了相关技术参数。该技术具备处理效果好、适应来水水质范围大、环境友好等优势。但由于空间重量的限制,尚不适用于海上油田平台的生产水处理工艺。     

上海市郊区河道底泥重金属污染状况评价

河道底泥重金属污染日益受到重视。对上海市郊区河道毛家塘底泥进行监测,分析了13种重金属元素(As,Cd,Cr,Cu,Ni,Pb,Zn,Hg,Be,Ag,Sb,Se,Ti)的含量特征,采用地累积指数法、潜在生态危害指数法、污染负荷指数法对重金属污染状况进行了评价。结果表明:河道底泥13种重金属中,Ag,Sb,Se,Ti 4种低于检测限,As,Cd,Cr,Cu,Ni,Pb,Zn,Hg,Be含量均超过了上海市土壤背景值;底泥重金属为中污染,As,Cd,Cu,Zn污染影响较大。除As以外,其余重金属含量均满足我国现行标准或指标要求,建议底泥后续处理利用参考达标标准的相应要求进行。     

电感耦合等离子体原子发射光谱法测定电路板中金属含量的方法改进

根据样品中被测元素的特点,采用硝酸-氢氟酸-高氯酸-硼酸-硝酸和硝酸体系,对电路板中金属元素进行消解,用电感耦合等离子体原子发射光谱法对电路板中的金属元素含量进行定量分析。该方法具有简单、准确的特点,可以快速分析电路板中的金属元素含量。     

Effects of metal and acidic sites on the reaction by-products of butyl acetate oxidation over palladium-based catalysts

Catalytic oxidation is widely used in pollution control technology to remove volatile organic compounds. In this study, Pd/ZSM-5 catalysts with different Pd contents and acidic sites were prepared via the impregnation method. All the catalysts were characterized by means of N2 adsorption- desorption, X-ray fluorescence （XRF）, HE temperature programmed reduction （H2-TPR）, and NH3 temperature programmed desorption （NH3-TPD）. Their catalytic performance was investigated in the oxidation of butyl acetate experiments. The by-products of the reaction were collected in thermal desorption tubes and identified by gas chromatography/mass spectrometry. It was found that the increase of Pd content slightly changed the catalytic activity of butyl acetate oxidation according to the yield of CO2 achieved at 90%, but decreased the cracking by-products, whereas the enhancement of strong acidity over Pd-based catalysts enriched the by-product species. The butyl acetate oxidation process involves a series of reaction steps including protolysis, dehydrogenation, dehydration, cracking, and isomerization. Generally, butyl acetate was cracked to acetic acid and 2- methylpropene and the latter was an intermediate of the other by-products, and the oxidation routes of typical by-products were proposed. Trace amounts of 3-methylpentane, hexane, 2-methylpentane, pentane, and 2-methylbutane originated from iso4merization and protolysis reactions.     

Ultrasonic preparation of nano-nickel/activated carbon composite using spent electroless nickel plating bath and application in degradation of 2,6-dichlorophenol

Ni was effectively recovered from spent electroless nickel （EN） plating baths by forming a nano-nickel coated activated carbon composite. With the aid of ultrasonication, melamine- formaldehyde-tetraoxalyl-ethylenediamine chelating resins were grafted on activated carbon （MFT/AG）. PdC12 sol was adsorbed on MFT/AC, which was then immersed in spent electroless nickel plating bath; then nano-nickel could be reduced by ascorbic acid to form a nano-nickel coating on the activated carbon composite （Ni/AC） in situ. The materials present were carefully examined by Fourier transform infrared spectroscopy, X-ray diffraction, field emission scanning electron microscopy, X-ray photoelectron spectroscopy and electro- chemistry techniques. The resins were well distributed on the inside and outside surfaces of activated carbon with a size of 120 ± 30 nm in MFT/AC, and a great deal of nano-nickel particles were evenly deposited with a size of 3.8 ± 1.1 nm in Ni/MFT. Moreover, Ni/AC was successfully used as a catalyst for ultrasonic degradation of 2.6-dichloronhenol.     

探讨适用于河流沉积物重金属污染程度的评价方法

本文使用地累积指数法和潜在生态危害指数法两种方法对同一区域五条河流的沉积物中重金属的测定结果进行了评价和比较,提出了将河流沉积物中重金属的监测纳入我国地表水常规监测的意见和建议.     

利用微型后生动物进行污泥原位减量的试验研究

在A/A/O普通活性污泥工艺中引入非寡毛类微型后生动物考察其生长条件和对剩余污泥的减量效果及对系统处理效果的影响。结果表明,当进水负荷小于0.5 mg(/mg MLSS·d)时,非寡毛类微型后生动物可大量生长;当内回流比升高、外回流比降低时,更有利于虫体的繁殖。经过适时的运行工艺调整可使生化系统虫体密度和稳定性提高,污泥减量效果可达到40%以上。非寡毛类后生动物的活动与摄食作用提高了系统污泥的沉降性能,并对系统出水COD、NH3-N、TN、TP、SS没有影响。。