Sustainable use of natural resources would entail ensuring that derived economic benefits today do not undermine the welfare of generations to come. On this basis, this study examines the nexus between natural resource rents and carbon dioxide (CO2) emissions disaggregated into production and consumption-based (i.e., trade-adjusted) CO2 emissions for a selected panel of 45 developing and transition economies over the period 1995–2017. The empirical model also incorporates the impacts of population, affluence, and energy intensity. The results show that affluence increases production-based CO2 emissions by 1.407%, with the EKC's predicted inverted U-shaped curve only explaining consumption-based CO2 emissions. Economic reliance on natural resource rents and energy intensification contribute 0.022% and 0.766%, respectively, to CO2 emissions embedded in territorial production inventories and 0.035% and 0.583%, respectively, to CO2 emissions embedded in consumption inventories. The bootstrap non-causality test shows that historical data on each variable has significant predictive power for future CO2 emissions from both sources. The historical information about natural resource rents has significant predictive power over the future levels of affluence and energy intensity. Clearly, the results show that the environmental impact of natural resource rents is stronger when CO2 emissions are adjusted for trade and varies among the countries, with Bangladesh, Guinea, India, Malaysia, Mexico, Nigeria, Pakistan, Saudi Arabia, Vietnam, and Zimbabwe among the most affected countries. Overall, this study provides motivation for policies to keep the use of natural resources within sustainable limits. 相似文献
• Pore structure affects biologically activated carbon performance.• Pore structure determines organic matter (OM) removal mechanism.• Microbial community structure is related to pore structure and OM removal. Optimizing the characteristics of granular activated carbon (GAC) can improve the performance of biologically activated carbon (BAC) filters, and iodine value has always been the principal index for GAC selection. However, in this study, among three types of GAC treating the same humic acid-contaminated water, one had an iodine value 35% lower than the other two, but the dissolved organic carbon removal efficiency of its BAC was less than 5% away from the others. Iodine value was found to influence the removal of different organic fractions instead of the total removal efficiency. Based on the removal and biological characteristics, two possible mechanisms of organic matter removal during steady-state were suggested. For GAC with poor micropore volume and iodine value, high molecular weight substances (3500–9000 Da) were removed mainly through degradation by microorganisms, and the biodegraded organics (soluble microbial by-products,<3500 Da) were released because of the low adsorption capacity of activated carbon. For GAC with higher micropore volume and iodine value, organics with low molecular weight (<3500 Da) were more easily removed, first being adsorbed by micropores and then biodegraded by the biofilm. The biomass was determined by the pore volume with pore diameters greater than 100 μm, but did not correspond to the removal efficiency. Nevertheless, the microbial community structure was coordinate with both the pore structure and the organic removal characteristics. The findings provide a theoretical basis for selecting GAC for the BAC process based on its pore structure. 相似文献
• N-doped activated carbon was prepared for catalytic pyrolysis of walnut shell.• Alkylphenols were selectively produced from catalytic pyrolysis process.• The alkylphenols yield increased by 8.5 times under the optimal conditions.• Formation mechanism of alkylphenols was proposed. Alkylphenols are a group of valuable phenolic compounds that can be derived from lignocellulosic biomass. In this study, three activated carbons (ACs) were prepared for catalytic fast pyrolysis (CFP) of walnut shell to produce alkylphenols, including nitrogen-doped walnut shell-derived activated carbon (N/WSAC), nitrogen-doped rice husk-derived activated carbon (N/RHAC) and walnut shell-derived activated carbon (WSAC). Pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) experiments were carried out to reveal the influences of AC type, pyrolytic temperature, and AC-to-walnut shell (AC-to-WS) ratio on the product distributions. Results showed that with nitrogen doping, the N/WSAC possessed stronger capability than WSAC toward the alkylphenols production, and moreover, the N/WSAC also exhibited better effects than N/RHAC to prepare alkylphenols. Under the catalysis of N/WSAC, yields of alkylphenols were significantly increased, especially phenol, cresol and 4-ethylphenol. As the increase of pyrolytic temperature, the alkylphenols yield first increased and then decreased, while high selectivity could be obtained at low pyrolytic temperatures. Such a trend was also observed as the AC-to-WS ratio continuously increased. The alkylphenols production achieved a maximal yield of 44.19 mg/g with the corresponding selectivity of 34.7% at the pyrolytic temperature of 400°C and AC-to-WS ratio of 3, compared with those of only 4.67 mg/g and 6.1% without catalyst. In addition, the possible formation mechanism of alkylphenols was also proposed with the catalysis of N/WSAC. 相似文献
Solar energy application in a large spectrum has the potential for high-efficiency energy conversion. Though, solar cells can only absorb photon energy of the solar spectrum near their band-gap energy, and the remaining energy will be converted into thermal energy. The use of the thermoelectric generator becomes a necessity for convert this thermal energy dissipated so as to increase efficiency conversion.
This paper analyses the feasibility of photovoltaic-thermoelectric hybrid system and reviews their performance in order to optimize harvested energy. Regarding the thermoelectric effect, a new method of the ambient energy harvesting is presented. This method combines thermoelectric generators and the effects of heat sensitive materials associated to photovoltaic cells in phase change for generating both energy day and night. Experimental measures have been conducted primarily in laboratory conditions for a greater understanding of hybridization phenomena under real conditions and to test the actual performance of devices made. Results show that the hybrid system can generate more power than the simple PV and TEG in environmental conditions. This hybrid technology will highlight the use of renewable energies in the service of the energy production. 相似文献