China’s carbon neutrality: an extensive and profound systemic reform

● China has pledged ambitious carbon peak and neutrality goals for mitigating global climate change. ● Major challenges to achieve carbon neutrality in China are summarized. ● The new opportunities along the pathway of China’s carbon neutrality are discussed from four aspects. ● Five policy suggestions for China are provided. China is the largest developing economy and carbon dioxide emitter in the world, the carbon neutrality goal of which will have a profound influence on the mitigation pathway of global climate change. The transition towards a carbon-neutral society is integrated into the construction of ecological civilization in China, and brings profound implications for China’s socioeconomic development. Here, we not only summarize the major challenges in achieving carbon neutrality in China, but also identify the four potential new opportunities: namely, the acceleration of technology innovations, narrowing regional disparity by reshaping the value of resources, transforming the industrial structure, and co-benefits of pollution and carbon mitigation. Finally, we provide five policy suggestions and highlight the importance of balancing economic growth and carbon mitigation, and the joint efforts among the government, the enterprises, and the residents.     

建设用地土壤污染状况调查监管存在的问题及对策探讨

明确了建设用地土壤污染状况调查监管的对象,分析了我国现阶段调查监管存在的监管力量不足、从业门槛不明确、实时监管措施缺乏等问题。结合国内外调查工作监管经验和近年苏州工业园区调查监管的探索实践,提出了鼓励引导相关利益方参与调查监管、建立健全从业人员和机构监管制度、引入监理机制、推进信息化过程管理等对策建议。     

Influence of pore structure on biologically activated carbon performance and biofilm microbial characteristics

• Pore structure affects biologically activated carbon performance. • Pore structure determines organic matter (OM) removal mechanism. • Microbial community structure is related to pore structure and OM removal. Optimizing the characteristics of granular activated carbon (GAC) can improve the performance of biologically activated carbon (BAC) filters, and iodine value has always been the principal index for GAC selection. However, in this study, among three types of GAC treating the same humic acid-contaminated water, one had an iodine value 35% lower than the other two, but the dissolved organic carbon removal efficiency of its BAC was less than 5% away from the others. Iodine value was found to influence the removal of different organic fractions instead of the total removal efficiency. Based on the removal and biological characteristics, two possible mechanisms of organic matter removal during steady-state were suggested. For GAC with poor micropore volume and iodine value, high molecular weight substances (3500–9000 Da) were removed mainly through degradation by microorganisms, and the biodegraded organics (soluble microbial by-products,<3500 Da) were released because of the low adsorption capacity of activated carbon. For GAC with higher micropore volume and iodine value, organics with low molecular weight (<3500 Da) were more easily removed, first being adsorbed by micropores and then biodegraded by the biofilm. The biomass was determined by the pore volume with pore diameters greater than 100 μm, but did not correspond to the removal efficiency. Nevertheless, the microbial community structure was coordinate with both the pore structure and the organic removal characteristics. The findings provide a theoretical basis for selecting GAC for the BAC process based on its pore structure.     

Rainfall Interception Based on Indirect Methods: A Case Study in Temperate Forests in Oaxaca,Mexico

Rainfall interception represents the amount of water trapped in natural cover that is not drained directly to the ground. Intercepted rainfall may evaporate after a rain event, making it one of the main drivers of water balance and hydrologic regionalization. This process can be affected by factors such as climate, altitude, vegetation type, and topography. Here is a simple method of calculating rainfall interception in temperate forests using in Santa Maria Yavesia, Oaxaca, and Mexico as an illustrative study area. We used two rain gauges to measure net precipitation (N_p) under the canopy at each study site and one gauge outside the canopy to obtain gross precipitation (G_p). Throughfall (T_h) was indirectly measured using hemispherical photographs. Rainfall interception was obtained through a combination T_h and G_p and N_p. The mean rainfall interception was 50.6% in the Abies forests, 23%–40% in the coniferous‐mixed forests, and 27.4% in the broad‐leaved forests. We classified rainfall events by intensity to determine the effect of canopy structure and precipitation and found that 75% of the events were weak events, 24% were moderate events, and 1% were strong events. In addition, we found that rainfall interception was lower when the intensity of precipitation was higher. Our method can be replicated in different ecosystems worldwide as a tool for assessing the influence of rainfall interception in terms of ecological services.     

三峡水库浮游植物群落特征及水体富营养化评价

基于2003—2017年三峡水库浮游植物群落结构、优势种群的变化和2017年水库干支流水质数据,全面分析浮游植物群落结构和演替特征,并运用综合营养状态指数法对水体富营养化程度进行评价。结果表明,三峡水库浮游植物种类丰富,监测期间共鉴定出浮游植物7门62属,细胞密度在7.5×10~4~2.8×10~7cell/L之间变化,Shannon-Wiener多样性指数为1.0~3.0,在α-中污带和β-中污带之间,说明三峡水库水生态环境健康状况相对较好;三峡水库浮游植物季节性演替特征呈硅藻和甲藻向蓝藻和绿藻演替的趋势,年际变化特征分析发现浮游植物密度在2008年175 m实验蓄水后大量增长,且优势藻类由河道型藻类向湖泊型藻类转化。通过监测数据分析,得出三峡水库干流处于中营养状态,支流在春季主要处于轻度富营养状态,秋季支流比春季支流的富营养化程度低,主要处于中营养状态,总氮(total nitrogen,TN)、总磷(total phosphorus,TP)和透明度(transparency,SD)为水质主要影响因子。     

鄱阳湖平原区农村门塘浮游藻类群落特征及其生物学评价

于2018年—2019年在鄱阳湖区周边选取4个县（区）10个村庄的典型门塘开展浮游藻类采样调查。研究共鉴定出藻类6门83种，以蓝藻门、绿藻门和硅藻门为主；浮游藻类细胞密度全年范围为7.30×104个/L～2.78×1011个/L，年均值为1.4×1010个/L，其中夏季细胞密度最大，冬季细胞密度最小；优势种主要有小环藻、微囊藻、铜绿微囊藻、卵形隐藻等，且具有较为明显的季节演替，全年优势种为小环藻；藻类多样性指数（H′）年均值为1.49，丰富度指数（M）年均值为1.92，全年水体生物学评价结果为中度污染。     

射阳湖浮游动物群落结构特征及其与环境因子相关性研究

2016—2017年对射阳湖开展浮游动物群落结构和水质指标逐月监测。结果表明,射阳湖共鉴定出浮游动物61种,其中原生动物、轮虫、枝角类和桡足类分别为25种、24种、7种和5种。浮游动物种类数呈现春夏季多于秋冬季的变化趋势。浮游动物优势种数量较多、分布广,群落结构相对复杂且稳定。运用Shannon-Wiener指数、均匀度指数和B/T指数对射阳湖水质作评价,结果表明,该湖处于轻度—中度污染状态,生物学指标评价法与常规水质评价结果一致。浮游动物群落结构与水质指标相关性分析表明,水温、透明度、Chl-a和DO是影响射阳湖浮游动物群落结构的主要水质指标。     

循环经济产业园规划与产业政策和相关规划的协调性分析

循环经济产业园规划与相关规划的协调性分析是论证循环经济产业园规划合理性的关键环节之一。以武汉市千子山循环经济产业园为例,通过对该产业园规划与产业政策和相关规划的协调性分析,论证了千子山循环经济产业园规划的合理性,为国内同类产业园规划提供参考。     

Estimating abundance without recaptures of marked pallid sturgeon in the Mississippi River

Abundance estimates are essential for assessing the viability of populations and the risks posed by alternative management actions. An effort to estimate abundance via a repeated mark‐recapture experiment may fail to recapture marked individuals. We devised a method for obtaining lower bounds on abundance in the absence of recaptures for both panmictic and spatially structured populations. The method assumes few enough recaptures were expected to be missed by random chance. The upper Bayesian credible limit on expected recaptures allows probabilistic statements about the minimum number of individuals present in the population. We applied this method to data from a 12‐year survey of pallid sturgeon (Scaphirhynchus albus) in the lower and middle Mississippi River (U.S.A.). None of the 241 individuals marked was recaptured in the survey. After accounting for survival and movement, our model‐averaged estimate of the total abundance of pallid sturgeon ≥3 years old in the study area had a 1%, 5%, or 25% chance of being <4,600, 7,000, or 15,000, respectively. When we assumed fish were distributed in proportion to survey catch per unit effort, the farthest downstream reach in the survey hosted at least 4.5–15 fish per river kilometer (rkm), whereas the remainder of the reaches in the lower and middle Mississippi River hosted at least 2.6–8.5 fish/rkm for all model variations examined. The lower Mississippi River had an average density of pallid sturgeon ≥3 years old of at least 3.0–9.8 fish/rkm. The choice of Bayesian prior was the largest source of uncertainty we considered but did not alter the order of magnitude of lower bounds. Nil‐recapture estimates of abundance are highly uncertain and require careful communication but can deliver insights from experiments that might otherwise be considered a failure.     

Cu/Cr co-stabilization mechanisms in a simulated Al2O3-Fe2O3-Cr2O3-CuO waste system

• Cu and Cr can be mostly incorporated into CuFe_xAl_yCr_2−x−yO₄ with a spinel structure. • Spinel phase is the most crucial structure for Cu and Cr co-stabilization. • Compared to Al, Fe and Cr are easier to be incorporated into the spinel structure. • ‘Waste-to-resource’ by thermal process at attainable temperatures can be achieved. Chromium slag usually contains various heavy metals, making its safe treatment difficult. Glass-ceramic sintering has been applied to resolve this issue and emerged as an effective method for metal immobilization by incorporating heavy metals into stable crystal structures. Currently, there is limited knowledge about the reaction pathways adopted by multiple heavy metals and the co-stabilization functions of the crystal structure. To study the Cu/Cr co-stabilization mechanisms during thermal treatment, a simulated system was prepared using a mixture with a molar ratio of Al₂O₃:Fe₂O₃:Cr₂O₃:CuO= 1:1:1:3. The samples were sintered at temperatures 600–1300°C followed by intensive analysis of phase constitutions and microstructure development. A spinel phase (CuFe_xAl_yCr_2−x−yO₄) started to generate at 700°C and the incorporation of Cu/Cr into the spinel largely complete at 900°C, although the spinel peak intensity continued increasing slightly at temperatures above 900°C. Fe₂O₃/Cr₂O₃ was more easily incorporated into the spinel at lower temperatures, while more Al₂O₃ was gradually incorporated into the spinel at higher temperatures. Additionally, sintered sample microstructures became more condensed and smoother with increased sintering temperature. Cu / Cr leachability substantially decreased after Cu/Cr incorporation into the spinel phase at elevated temperatures. At 600°C, the leached ratios for Cu and Cr were 6.28% and 0.65%, respectively. When sintering temperature was increased to 1300°C, the leached ratios for all metal components in the system were below 0.2%. This study proposes a sustainable method for managing Cu/Cr co-exist slag at reasonable temperatures.