保护性耕作对黑河流域农田土壤水分利用的影响

为了探讨保护性耕作节水、 增产潜力及其在黑河流域的适应性,设计20 cm留茬(NS20)、 20 cm留茬压倒(NPS20)、 40 cm留茬(NS40)、 40 cm留茬压倒(NPS40)和传统耕作(CT)5个处理,研究了保护性耕作对黑河流域农田土壤含水量、 产量和水分利用效率(WUE)的影响.结果表明:相对传统耕作,保护性耕作增加了土壤贮水量:在2003年和2004年休闲期结束后,NPS40、 NS40、 NS20和NPS20表层0~30 cm土壤贮水量较CT分别增加30.22%、 27.29%、 20.92%、 13.64%和48.32%、 38.90%、 29.85%、 23.28%;2004、 2005两年播种期0~5 cm土壤含水量NPS40、 NS40、 NPS20和NS20较CT分别增加37.29%、 37.10%、 21.49%、 41.90%和33.99%、 40.17%、 8.90%、 38.44%;播种到拔节期留茬高度越大,土壤贮水量越多,在相同高度的留茬处理中,干旱年份压倒处理保水效果较好,降雨相对较多的年份立茬处理保水效果较好;拔节后各层土壤贮水量之间差异减小.保护性耕作增加作物产量和水分利用效率,尤其是NPS20,2004年和2005年产量和WUE较传统耕作分别增加53.08%、 5.85%和52.04%、 7.30%.     

火灾后套筒灌浆料力学性能试验研究*

为研究火灾对套筒灌浆料力学性能的影响,设计不同受火时间（60,90 min）,不同静置时间（1,14 d）以及不同冷却方式（自然冷却、喷水冷却）试验,分析不同工况下的套筒灌浆料的抗折强度和抗压强度。结果表明:随着受火时间的增加,套筒灌浆料的抗折、抗压强度均逐渐降低,自然冷却后抗折强度残余率分别为11.3％、9.1％,抗压强度残余率分别为48.4％、25.8％,抗折强度降幅更大;随着静置时间的增加,套筒灌浆料抗折强度逐渐降低,在自然冷却工况下抗压强度降低,降幅均为5.5％,而在喷水冷却工况下则升高,增幅分别为11.4％和7.3％;受火时间、静置时间以及冷却方式对套筒灌浆料抗折、抗压强度均产生不利影响,其中受火时间影响最大。试验结果可为火灾后装配式混凝土结构灌浆套筒连接节点的鉴定评估与加固设计提供依据。     

浮桥河水库浮游植物的多样性及其演变

1997年4月至1998年1月对浮桥河水库浮游植物状况进行了调查,结果表明:该水库常见浮游植物约189种,隶属于8门92属,其中硅藻门25属64种,绿藻门39属79种,蓝藻门17属30种,甲藻门、隐藻门、裸藻门、黄藻门及金藻门种类较少。其个体密度年平均为44.9×104ind/L;生物量年平均为6.439mg/L,其中蓝藻占33.37%,硅藻和绿藻分别占20.68%和20.16%,甲藻占16.31%。浮游植物现存量的季节变化表现为从春季开始平稳上升,至秋季达到最大值。蓝藻、硅藻、绿藻等主要种类的季节变化按生物量大小依次为:秋季夏季春季冬季。浮游植物现存量的水平分布为上游最高,中游次之,下游最低,库汊低于中游而略高于下游。群落的相似性表现为上、中游相近,下游和库汊相近。群落的物种多样性根据计算Shannon-Weiner指数为上游最大,其次为中游,下游再次,库汊最低。与1980年的调查结果相比较,浮桥河水库浮游植物种类小型化明显,生物量增加2.5倍。     

试论我国农业环境保护战略问题

我国是发展中的国家，农业在国民经济中占有十分重要的地位，环境污染和生态破坏是农业潜伏着的生态危机，也是农业发展过程中亟待解决的重大问题。如何从我国农业环境问题的特点和农业经济现状出发，制定出与农业经济发展相适应遥农业环境保护战略，是我国农业发展和环境保护工作中的一项重要任务。本文就我国农业环境保护的战略地位和作用、指导思想和方针、目标和重点、措施等一系列战略问题，进行初步探讨。     

碳纤维混凝土的耐火性能试验测试与分析*

为研究不同碳纤维体积掺量（0，0.2%，0.6%，1%，1.5%，2%）对混凝土耐火性能的影响，考察不同温度环境下（20，60，100，300，500，800 ℃）的混凝土质量损失率与抗压强度损失率的变化情况；分析高温环境下混凝土的静置时间（0，1，3，7，12 h）对混凝土抗压强度损失率的影响。结果表明:随着碳纤维掺量的增加，混凝土质量损失率与抗压强度损失率呈现先下降后增加的趋势，其纤维掺量的拐点为1%；随着环境温度的上升，纤维混凝土的质量损失率与抗压强度损失率逐渐增加，并呈非线性增长趋势。随着静置时间的增加，混凝土抗压强度损失率逐渐增加，且呈非线性增长趋势。     

Evaluating weather effects on interannual variation in net ecosystem productivity of a coastal temperate forest landscape: A model intercomparison

Forest productivity is strongly affected by seasonal weather patterns and by natural or anthropogenic disturbances. However weather effects on forest productivity are not currently represented in inventory-based models such as CBM-CFS3 used in national forest C accounting programs. To evaluate different approaches to modelling these effects, a model intercomparison was conducted among CBM-CFS3 and four process models (ecosys, CN-CLASS, Can-IBIS and 3PG) over a 2500 ha landscape in the Oyster River (OR) area of British Columbia, Canada. The process models used local weather data to simulate net primary productivity (NPP), net ecosystem productivity (NEP) and net biome productivity (NBP) from 1920 to 2005. Other inputs used by the process and inventory models were generated from soil, land cover and disturbance records. During a period of intense disturbance from 1928 to 1943, simulated NBP diverged considerably among the models. This divergence was attributed to differences among models in the sizes of detrital and humus C stocks in different soil layers to which a uniform set of soil C transformation coefficients was applied during disturbances. After the disturbance period, divergence in modelled NBP among models was much smaller, and attributed mainly to differences in simulated NPP caused by different approaches to modelling weather effects on productivity. In spite of these differences, age-detrended variation in annual NPP and NEP of closed canopy forest stands was negatively correlated with mean daily maximum air temperature during July-September (T_amax) in all process models (R² = 0.4-0.6), indicating that these correlations were robust. The negative correlation between T_amax and NEP was attributed to different processes in different models, which were tested by comparing CO₂ fluxes from these models with those measured by eddy covariance (EC) under contrasting air temperatures (T_a). The general agreement in sensitivity of annual NPP to T_amax among the process models led to the development of a generalized algorithm for weather effects on NPP of coastal temperate coniferous forests for use in inventory-based models such as CBM-CFS3: NPP′ = NPP − 57.1 (T_amax − 18.6), where NPP and NPP′ are the current and temperature-adjusted annual NPP estimates from the inventory-based model, 18.6 is the long-term mean daily maximum air temperature during July-September, and T_amax is the mean value for the current year. Our analysis indicated that the sensitivity of NPP to T_amax was nonlinear, so that this algorithm should not be extrapolated beyond the conditions of this study. However the process-based methodology to estimate weather effects on NPP and NEP developed in this study is widely applicable to other forest types and may be adopted for other inventory based forest carbon cycle models.     

Ignition of dust-air atmospheres by ultrasonic waves

This paper shows the results of our investigations on the ignition source ultrasound in dust-air atmospheres. Ultrasound is, on the one hand, considered to be an ignition source according to international safety standards (EN 1127–1 (2011)). On the other hand, though, ultrasound is used for various applications in gases and air, such as level and flow measurement, or in the process industry, but no explosion accidents have yet been reported. Our research now shows that it is indeed possible to ignite dust-air mixtures in ultrasound fields under certain conditions. We conducted our experiments in an ultrasound standing wave field and used maize starch, calcium stearate and sulfur dust. For ignitions, an absorbing target was needed to convert the acoustic energy into heat. From theoretical estimations and experiments critical conditions that provoke ultrasonically triggered explosions are identified.     

吸声系数的先进现场测试技术发展概述

首先介绍了最常用的测试吸声系数的驻波管法与混响室法并阐述了两种方法优缺点。驻波管法测试的是法向吸声系数,混响室法得到的是各个入射方向的平均吸声系数,两种方法测试时均与实际安装情况存在一定差异,难以完成现场复杂环境下吸声系数的准确测试。而很多情况下,需要测试得到的是实际工作环境中的吸声系数,于是总结了传递函数法、PU矢量法、参量阵扬声器法、脉冲响应法、倒频谱法、最长序列数法以及减法技术等吸声系数的现场测试方法的原理与研究进展,分析了各测试方法的优缺点。     

稀土元素对富营养化水体中藻类增长的影响

利用藻类生长潜力测试方法,在太湖五里湖区水样中分别添加不同浓度轻,中、重３种稀土元素、Ｇｄ（Ⅲ）、Ｙ（Ⅲ）与３种稀土混合物,研究稀土元素对富营养化水体中藻类增长的影响。     

Energy transformations in two tropical Oxbow lakes

The flow and pattern of energy utilization in two tropical ecosystems where polyculture of fishes was practiced were studied. The rates of organic production made by the two tropical natural aquatic systems (oxbow lakes) were studied for two annual cycles. The study of utilization of energy in two tropical lakes revealed that herbivores were more efficient in energy utilization than autotrophs. The energy available in these systems was supplied by allochthonous source. Silver carp and grass carp were found to be most efficient in conversion of energy in the grazing food chain of the lake. The efficiency of the system to fish production was found to be 0.06 (OL-I) ?0.05% (OL-II) of the total available solar radiation. Various forms of life are all accompanied by energy changes, in the studied lakes were found to form a food web.