A review of measurement methods for peracetic acid (PAA)

• Physical and chemical properties and application of peracetic acid solution. • Determination method of high concentration peracetic acid. • Determination method of residual peracetic acid (low concentration). Peroxyacetic acid has been widely used in food, medical, and synthetic chemical fields for the past several decades. Recently, peroxyacetic acid has gradually become an effective alternative disinfectant in wastewater disinfection and has strong redox capacity for removing micro-pollutants from drinking water. However, commercial peroxyacetic acid solutions are primarily multi-component mixtures of peroxyacetic acid, acetic acid, hydrogen peroxide, and water. During the process of water treatment, peroxyacetic acid and hydrogen peroxide (H₂O₂) often coexist, which limits further investigation on the properties of peroxyacetic acid. Therefore, analytical methods need to achieve a certain level of selectivity, particularly when peroxyacetic acid and hydrogen peroxide coexist. This review summarizes the measurement and detection methods of peroxyacetic acid, comparing the principle, adaptability, and relative merits of these methods.     

不同类型活性炭处理废水中重金属离子的研究进展

重金属对人体的显著毒性和难降解的特性,使重金属水体污染成为全球性关注的环境问题。本文综述了重金属废水的危害、来源及常用处理方法,比较了不同类型活性炭处理废水中重金属离子的差异,阐述了不同类型活性炭处理技术的优势和特点,并对今后的重金属废水处理技术研究方向进行了展望。     

植物内重金属的赋存形态及分布特征分析方法研究进展

植物内重金属分析不仅有助于阐述重金属迁移转化规律,揭示植物修复机理,也是监测评价大气、水及土壤环境重金属污染状况的重要依据。研究针对植物样品中重金属赋存形态及分布特征的分析方法进行综述,分别介绍了其原理、优缺点及应用。提出制定统一高效的分析检测方法,深化植物内重金属的赋存形态及分布特征与环境相关性的研究以及建立数据共享平台是植物样品重金属信息分析方法的未来发展方向。     

Fieldwork after conflict: contextualising the challenges of access and data quality

Despite sustained scholarly interest in post‐conflict states, there has not been a thorough review and analysis of associated methodology and the challenges of conducting research in these contexts. Addressing this gap, this paper directs attention to the particular effects of these settings on access and data quality and their ramifications for the resulting scholarship. It assesses the intrinsic challenges of performing fieldwork in these environments, drawing on both relevant social science literature and the authors’ experiences of carrying out research in Afghanistan and Timor‐Leste. The study demonstrates that the post‐conflict environment moulds research design and, consequently, influences how questions are answered as well as the questions asked. Moreover, it highlights ways to mitigate these issues. This work is of relevance to scholars planning to engage in field research and to researchers reflecting upon their work, as well as to policymakers who are considering undertaking programmes or commissioning research in post‐conflict areas.     

Developing shared qualitative models for complex systems

Understanding complex systems is essential to ensure their conservation and effective management. Models commonly support understanding of complex ecological systems and, by extension, their conservation. Modeling, however, is largely a social process constrained by individuals’ mental models (i.e., a small-scale internal model of how a part of the world works based on knowledge, experience, values, beliefs, and assumptions) and system complexity. To account for both system complexity and the diversity of knowledge of complex systems, we devised a novel way to develop a shared qualitative complex system model. We disaggregated a system (carbonate coral reefs) into smaller subsystem modules that each represented a functioning unit, about which an individual is likely to have more comprehensive knowledge. This modular approach allowed us to elicit an individual mental model of a defined subsystem for which the individuals had a higher level of confidence in their knowledge of the relationships between variables. The challenge then was to bring these subsystem models together to form a complete, shared model of the entire system, which we attempted through 4 phases: develop the system framework and subsystem modules; develop the individual mental model elicitation methods; elicit the mental models; and identify and isolate differences for exploration and identify similarities to cocreate a shared qualitative model. The shared qualitative model provides opportunities to develop a quantitative model to understand and predict complex system change.     

Key considerations and challenges in the application of social-network research for environmental decision making

Attempts to better understand the social context in which conservation and environmental decisions are made has led to increased interest in human social networks. To improve the use of social-network analysis in conservation, we reviewed recent studies in the literature in which such methods were applied. In our review, we looked for problems in research design and analysis that limit the utility of network analysis. Nineteen of 55 articles published from January 2016 to June 2019 exhibited at least 1 of the following problems: application of analytical methods inadequate or sensitive to incomplete network data; application of statistical approaches that ignore dependency in the network; or lack of connection between the theoretical base, research question, and choice of analytical techniques. By drawing attention to these specific areas of concern and highlighting research frontiers and challenges, including causality, network dynamics, and new approaches, we responded to calls for increasing the rigorous application of social science in conservation.     

基于ALOHA软件的某化工厂选址合理性评估

为了研究化工厂选址的合理性,以山东省某化工厂为例,采用ALOHA(有害大气空中定位软件)模拟软件定量确定厂区内环氧乙烷毒气扩散事故的影响区域和敏感点毒气浓度,结合GoogleEarth地图对影响范围进行实地拟合。结果表明化工厂的环氧乙烷储罐泄漏后,毒气扩散到厂区范围之外,毒气浓度在50~500ppm之间的重伤区(ERPG-2)扩散距离可达1.7km,对周围居民的人身安全构成严重威胁;厂区应根据拟合结果重新规划工厂中环氧乙烷储罐的位置;ALOHA软件对化工厂选址评价提供了新的手段。     

Challenges for modelling and integrating environmental performances in concept design: the case of an automotive component lightweighting

The objective of this paper is to discuss the main barriers for modelling and integrating the environmental performances in the automotive concept design. Incorporating environmental assessment in the early design phase of a vehicle component is known as an important challenge that car makers need to face in order to develop more sustainable design solutions; in this regard, the Life Cycle Assessment is the most widespread methodology for the environmental assessment and comparison of alternatives. The present work illustrates the combination of such methodology with the traditional design procedure at two different levels of the component design phase, material choice and concept design. In particular, the potential benefits originated by a lightweight solution for the automotive component Throttle Body are evaluated by considering environmental and technical implications at the same level. The case study shows that a multi-disciplinary approach for design effectively allows the integration of the environmental issue in the company’s established procedures. However, interpretation of results is still a challenging aspect due to the inevitable contradicting elements which should not discourage to develop comprehensive sustainability assessment within the early design stage.     

混合酸消解变化对土壤和沉积物中痕量硒分析影响

基于各3种采集环境样本、国家标准物质的土壤和沉积物,以当前环境监测行业常用的3种消解方法,探讨20种混合酸系统条件在消解条件变化中对复杂样本硒元素测定的影响。确定了最佳土壤和沉积物消解的组合为王水系统(盐酸∶硝酸∶氢氟酸∶过氧化氢∶高氯酸=3∶1∶1∶1∶1),各消解法的处理结果部分(n=5)∶水浴法消解时间仅需0.5h,总处理时间2h,准确度回收率达101%~104%,精密度RSD为1.95%~2.20%;电热板法总处理时间较长(7.5h),回收率106%,RSD偏高为8.46%,不推荐使用;微波法处理的总时间亦长达7.0h,回收率93.8%,但精密度亦偏高为8.24%,因此采用水浴法应用于环境样本的测定。该优化消解方法已直接应用于环境中农业、建筑用土和管道淤泥沉积物的3种样品类型前处理,利用同一优化条件即可快速对应土壤和沉积物性质样品,单次可批量处理72~84个样本,解决高通量样品痕量硒测定需求,提供环境污染监测和检测行业一参考依据。     

典型有机磷酸酯阻燃剂分析方法研究进展

有机磷酸酯(OPEs)是一类重要的有机磷阻燃剂,近些年逐渐取代了溴代阻燃剂,广泛应用于各行各业,也因此导致在多种环境介质中有较高的暴露量和潜在风险。已有研究表明,OPEs具有一定的毒理效应,对人体及其他生物均有潜在危害。本文综述了近年来国内外OPEs的检测技术,详述了不同环境介质OPEs的前处理方法。结果表明,目前固相萃取(SPE)和固相微萃取(SPME)仍是水样前处理的主要方法;对于固体样品,加速溶剂萃取/加压液相萃取(ASE/PLE)和微波辅助萃取(MAE)应用较多;虽然大气样品仍以固体吸附剂方式为主,但已向在线一体化方向发展;而生物样品的前处理方法多与水样和固体样品方法相似;但是对于复杂环境介质中OPEs样品的前处理较为困难,方法有待改善;气相色谱-质谱联用(GC-MS)和气相色谱-氮磷检测器(GC-NPD)对弱极性和易挥发的OPEs分析效果好,而强极性和难挥发的OPEs多用液相色谱-质谱联用(LCMS);气相色谱-质谱串联(GC-MS/MS)、液相色谱-质谱串联(LC-MS/MS)和高效液相色谱-质谱串联(UPLC-MS/MS)等对多种复杂的环境介质中的OPEs均有较好的检测分析效果,但并未普及。最后,对OPEs分析测试方法的发展趋势提出了展望。