Revealing the changes of bacterial community from water source to consumers tap: A full-scale investigation in eastern city of China

This study profiled the bacterial community variations of water from four water treatment systems, including coagulation, sedimentation, sand filtration, ozonation-biological activated carbon filtration (O₃-BAC), disinfection, and the tap water after the distribution process in eastern China. The results showed that different water treatment processes affected the bacterial community structure in different ways. The traditional treatment processes, including coagulation, sedimentation and sand filtration, reduced the total bacterial count, while they had little effect on the bacterial community structure in the treated water (before disinfection). Compared to the traditional treatment process, O₃-BAC reduced the relative abundance of Sphingomonas in the finished water. In addition, ozonation may play a role in reducing the relative abundance of Mycobacterium. NaClO and ClO₂ had different effects on the bacterial community in the finished water. The relative abundance of some bacteria (e.g. Flavobacterium, Phreatobacter and Porphyrobacter) increased in the finished water after ClO₂ disinfection. The relative abundance of Mycobacterium and Legionella, which have been widely reported as waterborne opportunistic pathogens, increased after NaClO disinfection. In addition, some microorganisms proliferated and grew in the distribution system, which could lead to turbidity increases in the tap water. Compared to those in the finished water, the relative abundance of Sphingomonas, Hyphomicrobium, Phreatobacter, Rheinheimera, Pseudomonas and Acinetobacter increased in the tap water disinfected with NaClO, while the relative abundance of Mycobacterium increased in the tap water disinfected with ClO₂. Overall, this study provided the detailed variation in the bacterial community in the drinking water system.     

Polymer hydrogels with enhanced stability and heterogeneous Fenton activity in organic pollutant removal

Polymer hydrogel-based materials have been shown to act as novel Fenton catalysts for water treatment, but the rational design of hydrogel-based catalysts with good stability has been a great challenge. To increase the stability and activity of polymer-based Fenton catalysts, uniform urchin-like α-Fe_2O_3 was grown in situ in a PVA carrier matrix here. PVA molecules promoted the growth of urchin-like α-Fe_2O_3, and then the PVA hydrogel acted as a barrier and carrier to reduce agglomeration. Through coordination by hydroxyl groups,PVA had good combination with Fe ions and α-Fe_2O_3. The formation of Fe–O–C bonds between iron oxides and polymers was reported for the first time, enhancing the material stability during catalysis. Under higher PVA concentrations, the resulting composite hydrogel could generate more ˙OH due to the increase in the number of active sites because of the hairy urchin-like structure. In tetracycline degradation through a heterogeneous Fenton reaction, the resulting material had good catalytic activity from pH 2 to pH 10 with low iron leaching, good reusability and remained at a level of nearly 90%after five consecutive cycles. Density functional theory calculations were used to further prove the mechanism of structural change of the iron oxides. The HOMO and LUMO energies of the iron oxides changed from 5.428 and 4.899 eV to 5.926 and 5.310 eV,indicating that the presence of PVA could influence the charge of the iron atom. The results provide new insights into the preparation of polymer hydrogel-based heterogeneous Fenton catalysts with enhanced stability for water treatment.     

Size and resin fractionations of dissolved organic matter and trihalomethane precursors from four typical source waters in China

Dissolved organic matter (DOM) and its potential to form disinfection by-products (DBPs) during drinking water treatment raise challenges to water quality control. Understanding both chemical and physical characteristics of DOM in source waters is key to better water treatment. In this study, the DOM from four typical source waters in China was fractionated by XAD resin adsorption (RA) and ultrafiltration (UF) techniques. The trihalomethane formation potential (THMFP) of all fractions in the DOM were investigated to reveal the major THM precursors. The fraction distributions of DOM could be related to their geographical origins in a certain extent. The dominant chemical fraction as THM precursors in the DOM from south waters (East-Lake reservoir in Shenzhen and Peal rivers in Guangzhou) was hydrophobic acid (HoA). The size fraction with molecular weight (MW) <1 kDa in both south waters had the highest THMFP. The results of cluster analysis showed that the parameters of fractions including DOC percentage (DOC%), UV₂₅₄%, SUVA₂₅₄ (specific UV₂₅₄ absorbance) and THMFP were better for representing the differences of DOM from the studied waters than specific THMFP (STHMFP). The weak correlation between SUVA₂₅₄ and STHMFP for either size or XAD fractions suggests that whether SUVA₂₅₄ can be used as an indicator for the reactivity of THM formation is highly dependent on the nature of organic matter.     

Strong enhancement of methylene blue removal from binary wastewater by in-situ ferrite process

Dye wastewater containing heavy metal ions is a common industrial effluent with complex physicochemical properties.The treatment of metal–dye binary wastewater is difficult.In this work,a novel in-situ ferrite process(IFP) was applied to treat Methylene Blue(MB)–Cu(II)binary wastewater,and the operational parameters were optimized for MB removal.Results showed that the optimum operating conditions were OH/M of 1.72,Cu~(2+)/Fe~(2+)ratio of 1/2.5,reaction time of 90 min,aeration intensity of 320 mL/min,and reaction temperature of40°C.Moreover,the presence of Ca~(2+)and Mg~(2+)moderately influenced the MB removal.Physical characterization results indicated that the precipitates yielded in IFP presented high surface area(232.50 m2/g) and a multi-porous structure.Based on the Langmuir model,the maximum adsorption capacity toward MB was 347.82 mg/g for the precipitates produced in IFP,which outperformed most other adsorbents.Furthermore,IFP rapidly sequestered MB with removal efficiency 5 to 10 times greater than that by general ferrite adsorption,which suggested a strong enhancement of MB removal by IFP.The MB removal process by IFP showed two different high removal stages,each with a corresponding removal mechanism.In the first brief stage(5 min),the initial high MB removal(~95%)was achieved by predominantly electrostatic interactions.Then the sweep effect and encapsulation were dominant in the second longer stage.     

Adsorption of atrazine by natural organic matter and surfactant dispersed carbon nanotubes

The aggregation and dispersion behaviors of carbon nanotubes (CNTs) can regulate the environmental spread and fate of CNTs, as well as the organic pollutants adsorbed onto them. In this study, multi-walled carbon nanotubes (MWNTs) and single-walled carbon nanotubes (SWNTs) were surface modified with humic acids from di erent sources and with surfactants of di erent ionic types. The dispersion stability of surface modified CNTs was observed by UV-Vis spectrophotometry. The e ect of humic acid and surfactant dispersion on the adsorption of atrazine by CNTs was investigated by batch equilibrium experiments. Both humic acid and surfactant could e ectively disperse MWNTs, but not SWNTs, into stable suspensions under the studied conditions. Surface modified CNTs had a greatly reduced capacity for adsorption of atrazine. The inhibitory e ect of peat humic acid was relatively stronger than that of soil humic acid, but the two surfactants had a similar inhibitory e ect on atrazine adsorption by the two CNT types. Increases in surfactant concentration resulted in rapid decreases in the adsorption of atrazine by CNTs when the surfactant concentration was less than 0.5 critical micelle concentration.     

Deposition behavior of residual aluminum in drinking water distribution system: Effect of aluminum speciation

Finished drinking water usually contains some residual aluminum.The deposition of residual aluminum in distribution systems and potential release back to the drinking water could significantly influence the water quality at consumer taps.A preliminary analysis of aluminum content in cast iron pipe corrosion scales and loose deposits demonstrated that aluminum deposition on distribution pipe surfaces could be excessive for water treated by aluminum coagulants including polyaluminum chloride（PACl）.In this work,the deposition features of different aluminum species in PACl were investigated by simulated coil-pipe test,batch reactor test and quartz crystal microbalance with dissipation monitoring.The deposition amount of non-polymeric aluminum species was the least,and its deposition layer was soft and hydrated,which indicated the possible formation of amorphous Al（OH）₃.Al₁₃ had the highest deposition tendency,and the deposition layer was rigid and much less hydrated,which indicated that the deposited aluminum might possess regular structure and self-aggregation of Al₁₃could be the main deposition mechanism.While for Al₃₀,its deposition was relatively slower and deposited aluminum amount was relatively less compared with Al₁₃.However,the total deposited mass of Al₃₀ was much higher than that of Al₁₃,which was attributed to the deposition of particulate aluminum matters with much higher hydration state.Compared with stationary condition,stirring could significantly enhance the deposition process,while the effect of pH on deposition was relatively weak in the near neutral range of 6.7 to 8.7.     

Dye removal by eco-friendly physically cross-linked double network polymer hydrogel beads and their functionalized composites

Hydrogels have attracted large attention in wastewater treatment fields due to their low-cost and good interaction with pollutants, among which novel double network hydrogel is an outstanding class. To expand the application of double network hydrogel in water treatment, in this study, eco-friendly physically cross-linked double network polymer hydrogel beads (DAP) are prepared and studied in depth on the mechanism of Methylene Blue (MB) adsorption; and then the polymer hydrogels are further functionalized by inorganic materials. MB adsorption on DAP favors alkaline condition which is due to the increase of electrostatic attraction and adsorption site, and it reaches equilibrium within 10?hr, which is faster than that of the single network hydrogel beads (SAP). Through thermodynamics study, the process shows to be an exothermic and spontaneous process. The adsorption isotherms are well fitted by Langmuir model, with a maximum monolayer adsorption capacity of 1437.48?mg/g, which is larger than SAP (1255.75?mg/g). After being functionalized with common inorganic materials including activated carbon, Fe₃O₄ and graphene oxide (GO), the composites show to have larger pore sizes and have obvious increases in adsorption capacity especially the one contains GO. Then the composites contains Fe₃O₄ are used as heterogeneous Fenton catalyst which shows to have excellent performance in MB degradation. The results indicate the potential of polymer double network to be functionalized in environmental areas.     

The role of extracellular organic matter on the cyanobacteria ultrafiltration process

The membrane fouling caused by extracellular organic matter (EOM) and algal cells and organic matter removal of two typical cyanobacteria (M. aeruginosa and Pseudoanabaena sp.) during ultrafiltration (UF) process were studied in this work. The results showed that EOM had a broad molecular weight (Mw) distribution and the irreversible membrane fouling was basically caused by EOM. Moreover, humic acid and microbial metabolites were major components of EOM of two typical cyanobacteria. Since EOM could fill the voids of cake layers formed by the algal cells, EOM and algal cells played synergistic roles in membrane fouling. Fourier transform infrared spectroscopy analysis indicated that the CH₂ and CH₃ chemical bonds may play an important role in membrane fouling caused by EOM. Interestingly, the cake layer formed by the algal cells could trap the organic matter produced by algae and alleviate some irreversible membrane fouling. The results also showed that although the cake layer formed by the algal cells cause severe permeate flux decline, it could play a double interception role with UF membrane and increase organic matter removal efficiency. Therefore, when using UF to treat algae-laden water, the balance of membrane fouling and organic matter removal should be considered to meet the needs of practical applications.     

The control of red water occurrence and opportunistic pathogens risks in drinking water distribution systems: A review

Many problems in drinking water distribution systems (DWDSs) are caused by microbe, such as biofilm formation, biocorrosion and opportunistic pathogens growth. More iron release from corrosion scales may induce red water. Biofilm played great roles on the corrosion. The iron-oxidizing bacteria (IOB) promoted corrosion. However, when iron-reducing bacteria (IRB) and nitrate-reducing bacteria (NRB) became the main bacteria in biofilm, they could induce iron redox cycling in corrosion process. This process enhanced the precipitation of iron oxides and formation of more Fe₃O₄ in corrosion scales, which inhibited corrosion effectively. Therefore, the IRB and NRB in the biofilm can reduce iron release and red water occurrence. Moreover, there are many opportunistic pathogens in biofilm of DWDSs. The opportunistic pathogens growth in DWDSs related to the bacterial community changes due to the effects of micropollutants. Micropollutants increased the number of bacteria with antibiotic resistance genes (ARGs). Furthermore, extracellular polymeric substances (EPS) production was increased by the antibiotic resistant bacteria, leading to greater bacterial aggregation and adsorption, increasing the chlorine-resistance capability, which was responsible for the enhancement of the particle-associated opportunistic pathogens in DWDSs. Moreover, O₃-biological activated carbon filtration-UV-Cl₂ treatment could be used to control the iron release, red water occurrence and opportunistic pathogens growth in DWDSs.