Organochlorine pesticides and PCBs in fish from lakes of the Tibetan Plateau and the implications

High mountains may play significant roles in the global transport of persistent organic pollutants (POPs). This work aims to investigate the levels, patterns and distribution of semi-volatile organoclorine pollutants and to improve the understanding of the long-range atmospheric transport and fate of contaminants on the Tibetan Plateau. A total of 60 fish samples were collected from eight lakes located between 2813 and 4718 m above sea level across the Plateau. Concentrations of polychlorinated biphenyls (PCBs), organochlorine pesticides (OCPs) including dichlorodiphenyltrichloroethane and its metabolites (DDTs), hexachlorocyclohexanes (HCHs) and hexachlorobenzene (HCB) were measured in fish muscle. The results showed that concentrations of DDT, HCH and HCB were comparable to or lower than those found in remote mountains of Europe, Canada and US, while PCB concentrations in fish were, on average, about 4-150 times lower on Tibet than at other mountain areas. The transport and fate of contaminants in the Plateau are significantly influenced by the unique climatological and meteorological conditions, particularly by the summer Indian monsoon and winter westerly jet stream.     

Immobilization and transformation of co-existing arsenic and antimony in highly contaminated sediment by nano zero-valent iron

Arsenic(As) and antimony(Sb) are usually coexistent in mine wastes and pose a great threat to human health. The As immobilization by nano zero-valent iron(n ZVI) is promising, however, the stabilization for co-occurring As and Sb is not known. Herein, the immobilization and transformation of As and Sb in n ZVI-treated sediments were evaluated using complementary leaching experiments and characterization techniques. Raw sediment samples from a gold-antimony deposit revealed the co-existence of ul...     

Groundwater arsenic removal by coagulation using ferric(III) sulfate and polyferric sulfate: A comparative and mechanistic study

Elevated arsenic (As) in groundwater poses a great threat to human health. Coagulation using mono-and poly-Fe salts is becoming one of the most cost-effective processes for groundwater As removal. However, a limitation comes from insufficient understanding of the As removal mechanism from groundwater matrices in the coagulation process, which is critical for groundwater treatment and residual solid disposal. Here, we overcame this hurdle by utilizing microscopic techniques to explore molecular As surface complexes on the freshly formed Fe flocs and compared ferric(III) sulfate (FS) and polyferric sulfate (PFS) performance, and finally provided a practical solution in As-geogenic areas. FS and PFS exhibited a similar As removal efficiency in coagulation and coagulation/filtration in a two-bucket system using 5 mg/L Ca(ClO)₂. By using the two-bucket system combining coagulation and sand filtration, 500 L of As-safe water (<10 μg/L) was achieved during five treatment cycles by washing the sand layer after each cycle. Fe k-edge X-ray absorption near-edge structure (XANES) and As k-edge extended X-ray absorption fine structure (EXAFS) analysis of the solid residue indicated that As formed a bidentate binuclear complex on ferrihydrite, with no observation of scorodite or poorly-crystalline ferric arsenate. Such a stable surface complex is beneficial for As immobilization in the solid residue, as confirmed by the achievement of much lower leachate As (0.9 μg/L-0.487 mg/L) than the US EPA regulatory limit (5 mg/L). Finally, PFS is superior to FS because of its lower dose, much lower solid residue, and lower cost for As-safe drinking water.     

Removal of arsenate with hydrous ferric oxide coprecipitation：Effect of humic acid

Insights from the adverse effect of humic acid(HA) on arsenate removal with hydrous ferric oxide(HFO) coprecipitation can further our understanding of the fate of As(V) in water treatment process. The motivation of our study is to explore the competitive adsorption mechanisms of humic acid and As(V) on HFO on the molecular scale. Multiple complementary techniques were used including macroscopic adsorption experiments, surface enhanced Raman scattering(SERS), extended X-ray absorption fine structure(EXAFS) spectroscopy, flow-cell attenuated total reflectance Fourier transform infrared(ATR-FTIR) measurement, and charge distribution multisite complexation(CDMUSIC) modeling. The As(V) removal efficiency was reduced from over 95% to about 10% with the increasing HA concentration to 25 times of As(V) mass concentration. The SERS analysis excluded the HA-As(V) complex formation. The EXAFS results indicate that As(V) formed bidentate binuclear surface complexes in the presence of HA as evidenced by an As-Fe distance of 3.26–3.31 ?. The in situ ATR-FTIR measurements show that As(V) replaces surface hydroxyl groups and forms innersphere complex. High concentrations of HA may physically block the surface sites and inhibit the As(V) access. The adsorption of As(V) and HA decreased the point of zero charge of HFO from 7.8 to 5.8 and 6.3, respectively. The CD-MUSIC model described the zeta potential curves and adsorption edges of As(V) and HA reasonably well.     

Recent progress in detection of mercury using surface enhanced Raman spectroscopy — A review

Concerns over exposure to mercury have motivated the exploration of cost-effective, rapid, and reliable method for monitoring Hg^2 + in the environment. Recently, surface-enhanced Raman scattering (SERS) has become a promising alternative method for Hg^2 + analysis. SERS is a spectroscopic technique which combines modern laser spectroscopy with the optical properties of nano-sized noble metal structures, resulting in substantially increased Raman signals. When Hg^2 + is in a close contact with metallic nanostructures, the SERS effect provides unique structural information together with ultrasensitive detection limits. This review introduces the principles and contemporary approaches of SERS-based Hg^2 + detection. In addition, the perspective and challenges are briefly discussed.     

Groundwater arsenic removal by coagulation using ferric(Ⅲ)sulfate and polyferric sulfate: A comparative and mechanistic study

Elevated arsenic(As) in groundwater poses a great threat to human health. Coagulation using mono- and poly-Fe salts is becoming one of the most cost-effective processes for groundwater As removal. However, a limitation comes from insufficient understanding of the As removal mechanism from groundwater matrices in the coagulation process, which is critical for groundwater treatment and residual solid disposal. Here, we overcame this hurdle by utilizing microscopic techniques to explore molecular As surface complexes on the freshly formed Fe flocs and compared ferric(III) sulfate(FS) and polyferric sulfate(PFS)performance, and finally provided a practical solution in As-geogenic areas. FS and PFS exhibited a similar As removal efficiency in coagulation and coagulation/filtration in a two-bucket system using 5 mg/L Ca(ClO)_2. By using the two-bucket system combining coagulation and sand filtration, 500 L of As-safe water( 10 μg/L) was achieved during five treatment cycles by washing the sand layer after each cycle. Fe k-edge X-ray absorption near-edge structure(XANES) and As k-edge extended X-ray absorption fine structure(EXAFS) analysis of the solid residue indicated that As formed a bidentate binuclear complex on ferrihydrite, with no observation of scorodite or poorly-crystalline ferric arsenate. Such a stable surface complex is beneficial for As immobilization in the solid residue, as confirmed by the achievement of much lower leachate As(0.9 μg/L–0.487 mg/L)than the US EPA regulatory limit(5 mg/L). Finally, PFS is superior to FS because of its lower dose, much lower solid residue, and lower cost for As-safe drinking water.     

Asenic removal from groundwater using granular chitosan-titanium adsorbent

Arsenic(As) contamination poses an urgent environmental risk, and its removal from groundwater remains a challenge due to the lack of efficient adsorbents. Herein, a novel granular chitosan-titanium(CS-Ti) adsorbent was fabricated by the sol-gel method. Batch experiments show that As(V) adsorption on CS-Ti followed the pseudo-second-order kinetic model, and the adsorption isotherm conformed to the Freundlich model with the correlation coefficient of 0.99. In situ FTIR spectra revealed that the C...     

Experimental and molecular dynamic simulation study of perfluorooctane sulfonate adsorption on soil and sediment components

Soil and sediment play a crucial role in the fate and transport of perfluorooctane sulfonate(PFOS) in the environment. However, the molecular mechanisms of major soil/sediment components on PFOS adsorption remain unclear. This study experimentally isolated three major components in soil/sediment: humin/kerogen, humic/fulvic acid(HA/FA), and inorganic component after removing organics, and explored their contributions to PFOS adsorption using batch adsorption experiments and molecular dynamic simulations. The results suggest that the humin/kerogen component dominated the PFOS adsorption due to its aliphatic features where hydrophobic effect and phase transfer are the primary adsorption mechanism.Compared with the humin/kerogen, the HA/FA component contributed less to the PFOS adsorption because of its hydrophilic and polar characteristics. The electrostatic repulsion between the polar groups of HA/FA and PFOS anions was attributable to the reduced PFOS adsorption. When the soil organic matter was extracted, the inorganic component also plays a non-negligible role because PFOS molecules might form surface complexes on SiO 2surface.The findings obtained in this study illustrate the contribution of organic matters in soils and sediments to PFOS adsorption and provided new perspective to understanding the adsorption process of PFOS on micro-interface in the environment.     

Groundwater arsenic removal by coagulation using ferric(III) sulfate and polyferric sulfate: A comparative and mechanistic study

Elevated arsenic (As) in groundwater poses a great threat to human health. Coagulation using mono- and poly-Fe salts is becoming one of the most cost-effective processes for groundwater As removal. However, a limitation comes from insufficient understanding of the As removal mechanism from groundwater matrices in the coagulation process, which is critical for groundwater treatment and residual solid disposal. Here, we overcame this hurdle by utilizing microscopic techniques to explore molecular As surface complexes on the freshly formed Fe flocs and compared ferric(III) sulfate (FS) and polyferric sulfate (PFS) performance, and finally provided a practical solution in As-geogenic areas. FS and PFS exhibited a similar As removal efficiency in coagulation and coagulation/filtration in a two-bucket system using 5 mg/L Ca(ClO)₂. By using the two-bucket system combining coagulation and sand filtration, 500 L of As-safe water (< 10 μg/L) was achieved during five treatment cycles by washing the sand layer after each cycle. Fe k-edge X-ray absorption near-edge structure (XANES) and As k-edge extended X-ray absorption fine structure (EXAFS) analysis of the solid residue indicated that As formed a bidentate binuclear complex on ferrihydrite, with no observation of scorodite or poorly-crystalline ferric arsenate. Such a stable surface complex is beneficial for As immobilization in the solid residue, as confirmed by the achievement of much lower leachate As (0.9 μg/L–0.487 mg/L) than the US EPA regulatory limit (5 mg/L). Finally, PFS is superior to FS because of its lower dose, much lower solid residue, and lower cost for As-safe drinking water.     

Remediation of organic and inorganic arsenic contaminated groundwater using a nanocrystalline TiO2-based adsorbent

A nanocrystalline TiO₂-based adsorbent was evaluated for the simultaneous removal of As(V), As(III), monomethylarsonic acid (MMA), and dimethylarsinic acid (DMA) in contaminated groundwater. Batch experimental results show that As adsorption followed pseudo-second order rate kinetics. The competitive adsorption was described with the charge distribution multi-site surface complexation model (CD-MUSIC). The groundwater containing an average of 329 μg L⁻¹ As(III), 246 μg L⁻¹ As(V), 151 μg L⁻¹ MMA, and 202 μg L⁻¹ DMA was continuously passed through a TiO₂ filter at an empty bed contact time of 6 min for 4 months. Approximately 11 000, 14 000, and 9900 bed volumes of water had been treated before the As(III), As(V), and MMA concentration in the effluent increased to 10 μg L⁻¹. However, very little DMA was removed. The EXAFS results demonstrate the existence of a bidentate binuclear As(V) surface complex on spent adsorbent, indicating the oxidation of adsorbed As(III).