Numerical simulation of an array of fences in Saemangeum reclaimed land

This paper discusses about the quantitative effect of windbreak fences on wind velocity in the reclaimed land at Saemangeum in South Korea. Windbreak fences were constructed in the reclaimed land to reduce the wind velocity to prevent the generation and diffusion of dust. However, up to this time, no in-depth studies were conducted to quantitatively measure the effect of the windbreak fences on wind velocity thus an optimum windbreak structure is not yet determined. Using CFD simulations, the effects of fence porosity, fence height, and the distance between the adjacent fences were investigated. A wind tunnel experiment was initially conducted and data gathered were used to develop the CFD models. From the experiments and CFD simulations, the overall percentage difference of the measured velocities was 7.20% which is generally acceptable to establishing the reliability of the CFD models. The reduction effect on wind velocity was measured in between the adjacent fences up to a height of 0.6 m from the ground surface. In terms of porosity ( = 0, 0.2, 0.4, 0.6), 0.2 was found to be the optimum value. Conversely, the effect of fence height (0.6, 0.8 and 1.0 m) showed no significant difference; therefore, 0.6 m height is recommended. In addition, the reduction effect of distance between the adjacent fences (2, 4 and 6 m) on wind velocity having a 0.2 porosity has decreased to about 75% regardless of the distance. In the case of the reclaimed land in Saemangeum, a decrease of 75% can prevent the generation and diffusion of dusts. However, the source of dusts is very large. Therefore, constructing an array of windbreak with 6 m distance between them is deemed necessary.     

Economic benefits of preventing bird collisions in South Korea: findings from a choice experiment survey

Bird deaths due to collisions with artificial structures, such as glass windows of buildings and transparent noise barriers, are continuing to occur in South Korea. The government is trying to prevent bird collisions by increasing the attachment of specially designed tapes to help birds avoid windows. This article estimates the economic benefits arising from the prevention of collisions by applying a choice experiment (CE). For this purpose, a CE survey of 1000 South Korean interviewees was conducted. The four attributes to be attached with the tapes for the CE application were a transparent soundproof wall window on an expressway, a transparent soundproof wall window on a general road, a glass window in a public building, and a glass window in a private building. The unit was the percentage of each structure with the tapes attached to the window. The marginal values of a one-unit (1%p) increase in each attribute were computed to be KRW 534 (USD 0.46), KRW 233 (USD 0.20), KRW 1,318 (USD 1.13), and KRW 12,930 (USD 11.05), respectively. This quantitative information will be an important reference for implementing the prevention policy. For example, based on the collision prevention of 1000 birds per structure, the priority for attaching tapes can be placed in the order of expressways, public buildings, private buildings, and general roads.

     

Morphological variation of dinoflagellate Prorocentrum lima (Ehrenberg) Dodge with geographical difference

Prorocentrum lima (Ehrenberg) Dodge, one of the cosmopolitan dinoflagellates, is basically benthic and is found on the surface of macroalgae and detritus. The identification of this species requires detailed morphological observation because of its close similarity to other benthic Prorocentrum species. The purpose of this study is to detect the morphological variability of P. lima using culture clones collected from several areas to find an adequate way of subdividing the species. In this study, 33 clones of P. lima were collected from Saipan, Tahiti, Indonesia, Japan and Bermuda, and their thecal valves and periflagellar area were observed by means of light microscopy with differential interference contrast optics and scanning electron microscopy. In general cells have two centrally located pyrenoids and a posterior nucleus. The surface of both valves has many valve pores except the center. Evenly spaced marginal pores are located along the edge of the valves. P. lima samples studied herein were subdivided into four major types (ellipsoidal, general, short, and elongate ovoid) according to their shapes, length-to-width ratio and number of valve pores. The length-to-width ratios of ellipsoidal, general, short, and elongate ovoid types were 1.32, 1.33-1.43, 1.20-1.27, and 1.53-1.60 microm respectively. Also there were slight differences in the number of valve pores. The number of valve pores examined in this study ranges from 40 to 97: ellipsoidal, general, and short ovoid types range from 40 to 91, while an elongate ovoid type ranges from 80 to 97. The combination of valve shape, number of valve pores and length-to-width ratio provides useful information on the morphological variation of P. lima.     

Selective recovery of Cu, Zn, and Ni from acid mine drainage

In Korea, the heavy metal pollution from about 1,000 abandoned mines has been a serious environmental issue. Especially, the surface waters, groundwaters, and soils around mines have been contaminated by heavy metals originating from acid mine drainage (AMD) and mine tailings. So far, AMD was considered as a waste stream to be treated to prevent environmental pollutions; however, the stream contains mainly Fe and Al and valuable metals such as Ni, Zn, and Cu. In this study, Visual MINTEQ simulation was carried out to investigate the speciation of heavy metals as functions of pH and neutralizing agents. Based on the simulation, selective pH values were determined to form hydroxide or carbonate precipitates of Cu, Zn, and Ni. Experiments based on the simulation results show that the recovery yield of Zn and Cu were 91 and 94 %, respectively, in a binary mixture of Cu and Zn, while 95 % of Cu and 94 % of Ni were recovered in a binary mixture of Cu and Ni. However, the recovery yield and purity of Zn and Ni were very low because of similar characteristics of Zn and Ni. Therefore, the mixture of Cu and Zn or Cu and Ni could be recovered by selective precipitation via pH adjustment; however, it is impossible to recover selectively Zn and Ni in the mixture of them.     

Kinetics of chemical decolorization of the azo dye C.I. Reactive Orange 96 by sulfide

The mechanism of decolorization of azo dyes based on the extracellular chemical reduction with sulfide (H2S, HS-, S2-) was postulated for sulfate reducing environments. To design technical decolorization processes of textile wastewater treatment with sulfide produced by sulfate reducing bacteria (SRB), kinetics is of great significance. Batch experiments were made in order to investigate the kinetics of abiotic decolorization of the reactive mono-azo dye C.I. Reactive Orange 96 (RO 96) with sulfide, with varying pH. The decolorization of RO 96 by sulfide under the exclusion of O2 corresponded to first-order kinetics with respect to both dye and sulfide concentration. The decolorization of RO 96 with sulfide at neutral pH (7.1) was advantageous compared with that at pH for 4.1, 6.3, and 6.5. This is attributed to an increase in the fraction of HS- of total sulfide species at neutral pH. The rate constants k for the decolorization at 37 degrees C were obtained as 0.01 for pH = 4.1, 0.06 for pH = 6.3, 0.08 for pH = 6.5, and 0.09 for pH = 7.1 in mM(-1) min(-1). The high rate constants for sulfide at pH 6.5-7.1 support that the decolorization through SRB (i.e. by bio-sulfide) can be effective in anaerobic bacterial systems with sulfate.     

Effects of basic oxygen furnace slag and inorganic nutrients on the germination of resting cysts of two toxic dinoflagellates

Effects of basic oxygen furnace (BOF) slag, inorganic nutrients and H2S on the germination of resting cysts of two toxic dinoflagellates Alexandrium catenella/tamarense and Gymnodinium catenatum were studied in batch cultures. The germination rate of the test species has increased by 23-25%, when the concentration of NO3--N or H2S in culture medium has increased to 2.0 ppm. At the treatment of enriched NH4+-N and PO43--p, the germination of resting cyst was increased. Nevertheless, the increased range in germination rates was less than those of NO3--N and H2S. When BOF slag in culture medium increased to 50 mg/ml (or 500 g/m2), the cyst germination rate fell to less than 5%. At higher level of concentrations germination was completely inhibited. Adding BOF slag to the culture medium reduced the concentration of inorganic salts and H2S in seawater and sediments, resulting in the inhibition of cyst germination. These findings demonstrate the potential use of BOF slag on the sediments seed bank of red tide organism because it has an ability to inhibit resting cysts germination.     

Identification of potential biomarkers for diazinon exposure to Japanese Medaka (Oryzias latipes) using annealing control primers

A new differential display-polymerase chain reaction (PCR) method based on annealing control primers was used to screen and identify potential biomarkers from differentially expressed genes (DEGs) in medaka exposed to sub-lethal concentration of diazinon (100 ppb). Among the differentially expressed genes identified, the majority were in functional categories of protein biosynthesis, transport and metabolism according to the gene ontology classification. The differential expression of ribosomal protein genes was quantified by real time PCR. The genes encoding ribosomal proteins including L3 and S17 were selected as potential biomarkers for diazinon exposure in medaka fish.     

Enrichment of the metallic components from waste printed circuit boards by a mechanical separation process using a stamp mill

Printed circuit boards incorporated in most electrical and electronic equipment contain valuable metals such as Cu, Ni, Au, Ag, Pd, Fe, Sn, and Pb. In order to employ a hydrometallurgical route for the recycling of valuable metals from printed circuit boards, a mechanical pre-treatment step is needed. In this study, the metallic components from waste printed circuit boards have been enriched using a mechanical separation process. Waste printed circuit boards shredded to <10mm were milled using a stamp mill to liberate the various metallic components, and then the milled printed circuit boards were classified into fractions of <0.6, 0.6-1.2, 1.2-2.5, 2.5-5.0, and >5.0mm. The fractions of milled printed circuit boards of size <5.0mm were separated into a light fraction of mostly non-metallic components and a heavy fraction of the metallic components by gravity separation using a zig-zag classifier. The >5.0mm fraction and the heavy fraction were subjected to two-step magnetic separation. Through the first magnetic separation at 700 Gauss, 83% of the nickel and iron, based on the whole printed circuit boards, was recovered in the magnetic fraction, and 92% of the copper was recovered in the non-magnetic fraction. The cumulative recovery of nickel-iron concentrate was increased by a second magnetic separation at 3000 Gauss, but the grade of the concentrate decreased remarkably from 76% to 56%. The cumulative recovery of copper concentrate decreased, but the grade increased slightly from 71.6% to 75.4%. This study has demonstrated the feasibility of the mechanical separation process consisting of milling/size classification/gravity separation/two-step magnetic separation for enriching metallic components such as Cu, Ni, Al, and Fe from waste printed circuit boards.     

Use of physical properties to predict the effects of tillage practices on organic matter dynamics in three Illinois soils

This work builds on a previous study of long-term tillage trials that found use of no-tillage (NT) practices increased soil organic carbon (SOC) sequestration at Monmouth, IL (silt loam soil) by increasing the soil's protective capacity, but did not alter SOC storage in DeKalb, IL (silty clay loam), where higher clay contents provided a protective capacity not affected by tillage. The least limiting water range (LLWR), a multi-factor index of structural quality, predicted observed soil CO2 efflux patterns. Here we consider whether LLWR can predict sequestration trends at a third site, Perry, IL (silt loam soil) where SOC content is lower and bulk density is higher than in previously considered sites, and determine whether pore size characteristics can help explain the influence use of NT practices has had on SOC sequestration at all three locations. At Perry, LLWR was again related with differences in specific soil organic carbon mineralization rates (RESPsp) (2000-2001). Reduced RESPsp rates explain increases in SOC storage under NT management observed only after 17 yr. Trends in RESPsp suggest use of NT practices only enhance physical protection of SOC where soil bulk density is relatively high (approximately 1.4 g cm(-3)). In those soils (Monmouth and Perry), use of NT management reduced the volume of small macropores (15-150 microm) thought to be important for microbial activity. Physical properties appear to determine whether or not use of NT practices will enhance C storage by increasing physical protection of SOC. By refining the functions used to compute the LLWR and our understanding of the interactions between management, pore structure, and SOC mineralization, we should be able to predict the influence of tillage practices on SOC sequestration.