能净化空气的环保砖

香港大学研制成功一种环保砖，该砖表面布满小孔，他们在砖头表面涂上5mm厚的特制涂层，配合小孔机构，只要有阳光照射，便会产生光催化作用，将汽车排放废气的主要成分，如氮氧化物、可挥发有机物以及一氧化碳转化为无毒的固体，并藏在小孔内，遇水后污染物被水冲走。     

稀土酞菁锰对表面活性剂(LAS)的催化氧化性能研究

研究了一种新型含稀土酞菁锰(KCeO2MnPcX)催化剂对水中表面活性剂直链烷基苯磺酸钠(LAS)氧化降解的催化性能,讨论了影响催化氧化反应的各种因素,并确定了最佳反应条件。同时初步探讨了这种催化剂对表面活性剂的催化氧化机理,为处理表面活性剂废水提供了新的途径。     

金属铁还原降解2,4-二硝基甲苯的实验研究

研究了金属铁对2,4-二硝基甲苯(2,4-DNT)的还原降解情况.实验结果表明,2,4-DNT的还原降解与溶液初始pH值、初始浓度和溶解氧等因素有关.氯离子能消除金属铁的钝化现象.金属铁表面附载的铜对2,4-DNT的还原降解具有催化作用.     

Fulvic acid removal by nanoparticle TiO2 using a submerged membrane photocatalysis reactor

The degradation of fulvic acid（FA） by nanoparticle TiO2 in a submerged membrane photocatalysis（SMPC） reactor was studied. In this reactor, photocatalytic oxidation and membrane separation co-occured. The continuous air supplier provided O2 for the photocatalytical reaction and mixed the solution through an airflow controller. The particle TiO2 could automatically settle due to gravity without particle agglomeration so it could be easily separated by microfiltration（MF） membrane. It was efficient to maintain high flux of membranes. The effects of operational parameters on the photocatalytic oxidation rate of FA were investigated. Results indicated that photocatalyst at 0.5 g/L and airflow at 0.06 m^3/h were the optimum condition for the removal of fulvic acid, the removal efficiency was higher in acid media than that in alkaline media. The effects of different filtration duration on permeate flux rate of MF with P25 powder and with nanoparticle TiO2 were compared. Experimental results indicated that the permeate flux rate of MF was improved and the membrane fouling phenomenon was reduced with the addition of nanoparticle TiO2 catalyst compared with conventional P25 powder. Therefore, this submerged membrane photocatalysis reactor can faciliate potential application of photocatalytic oxidation process in drinking water treatment.     

改性膨润土对水中萃胺光化学降解的催化作用研究

研究了改性膨润土对水中苯胺光化学降解的催化作用，试验了水中苯胺的光化学降解的适宜条件，结果表明，改性膨润土能有效地催化苯胺的光化学降解。     

钙化物在废弃物基活性炭制备过程中的影响

研究了以城市垃圾中3种典型的固体有机废弃物——锯木屑、纸张和塑料的热解产物（分别简称木炭、纸炭和塑料热解物）为原料,水蒸气为活化剂制备废弃物基活性炭时钙化物含量对活化过程、活性炭吸附性能（以碘值表征）及其孔结构的影响。结果表明,钙化物可加快活化反应的速度,且钙化物含量在1.5%时活化反应速度即已不再随钙化物含量的增加而增加;活性炭的吸附性能则随钙化物含量的增加而减少,同时钙化物对活性炭的孔径分布基本无影响,但降低了活性炭的比表面积、微孔孔容及中孔孔容;钙化物的2种前驱体（即CaO和Ca（OH）2）对活化过程具有相同的催化作用。     

假单胞茵胞内酶粗提液对藻毒素MCLR的降解

对比研究了假单胞菌M-6及其细胞内外提取液对微囊藻毒素-LR(MCLR)的降解效率.结果表明,细胞外提取液对藻毒素没有降解作用,胞内酶粗提液能在24h内降解MCLR,日均MCLR降解率是纯菌株M-6的4.7倍.进而研究了酶蛋白浓度、底物MCLR浓度、pH值及环境温度对胞内酶粗提液降解藻毒素效率的影响.当MCLR浓度为15.0mg·l~(-1)时,MCLR适宜的酶促降解反应条件为:酶蛋白浓度280mg·l~(-1),温度为30℃,反应pH值为7.0.MCLR液相色谱结构变化图表明,至少有3种酶参与了胞内酶粗提液降解MCLR的分子过程.     

脉冲电晕放电降解CH2Cl2的初步研究

对高压脉冲电晕放电降解ＣＨ２Ｃｌ２进行初步研究,比较了正负脉冲电晕降解的活性,正脉冲电晕优于负脉冲电晕。探讨了脉冲形成电容Ｃｐ之值及反应器的电晕线材料对降解反应活性的影响。为进一步提高室温下ＣＨ２Ｃｌ２的降解,在反应器中加入ＢａＴｉＯ３为催化剂,在高压脉冲电场下,ＢａＴｉＯ３受激产生局部电晕,增强了电晕放电流性,提高了反应活性,ＣＨ２Ｃｌ２的转化率达９０％以上。     

Role of the reduction site in the fluorinated or sulfated TiO2 photocatalytic process

In this article,the effects of TiO_2 surface fluorination and sulfation,on the active oxygen species formed at the reduction site in the photocatalytic process,namely O_2~(?) and H_2O_2,were investigated from a new perspective.The superoxide radical,(O_2~(?)),was determined by colorimetry of nitroblue tetrazolium,a prominent O_2~(?) scavenger.Hydrogen peroxide (H_2O_2) was estimated by using the iodide-starch method.In the naked TiO_2 photocatalysis,O_2~(?) though less reactive,was a very important intermediate.When the TiO_2 surface was fluorinated,more O_2~(?) and H_2O_2 were produced,which indicated that the surface modification could greatly reduce the recombination of photogenerated electrons and holes,thus enhancing the photocatalytic rate.In the sulfated system,photocatalysis proceeded with a more complicated mechanism.These results added support to the view of fluoride-induced enhancement and sulfide's nonappreciable inhibition effect.     

Enhanced photocatalytic activity of TiO2 by surface fluorination in degradation of organic cationic compound

Experiments were carried out to investigate the influence of TiO2 surface fluorination on the photodegradation of a representative organic cationic compound, Methylene Blue （MB）. The eleetropositive MB shows poor adsorption on TiO2 surface; its degradation performs a HO. radical-mediated mechanism. In the F-modified system, the kinetic reaction rate enlarged more than 2.5 fold that was attributed mainly to the accumulating adsorption of MB and the increased photogenerated hole available on the F-modified TiO2 surface.