生物气溶胶的吸湿性

归纳了有关气溶胶吸湿性的测量方法以及过去近30a来文献中报道的生物气溶胶吸湿性的主要研究成果,总结了不同种类生物气溶胶之间吸湿性的差异.已有研究表明,绝大部分的生物气溶胶粒子都具有一定的吸湿性,当相对湿度为90%时,吸湿增长因子约为1.04（真菌孢子）~1.22（细菌）,花粉颗粒物吸湿后的质量与之前的比值为1.30~1.55.最后,提出了目前关于生物气溶胶吸湿性研究中尚未解决的科学问题及该领域的主要发展方向.     

产α-淀粉酶菌株液体培养条件的探讨

目的是探讨在液体培养条件下枯草芽胞杆菌(B.subtilis HY-02)降解淀粉的影响因素。方法是设0、0.5%、1%、1.75%四种淀粉浓度的培养基,接种细菌后,在32℃的温箱、水浴、振荡三种条件下培养,连续检测α-淀粉酶活性及淀粉浓度。结果为温箱、水浴培养:96h后,1%淀粉瓶α-淀粉酶活性、分解淀粉最明显,1.75%淀粉瓶存在抑制酶活性的现象。振荡培养:1.75%淀粉瓶优于其他组。结论是初始淀粉浓度、培养方式对枯草芽胞杆菌α-淀粉酶活性影响较大,也直接影响了淀粉的分解。     

室内常见气传真菌孢子的细胞毒性研究

分别以MTT比色法和细胞克隆形成率实验，观察了室内常见气传真菌孢子对中国仓鼠（CHL）肺上皮细胞的存活和增殖能力的影响，并通过检测细胞培养液中乳酸脱氢酶（LDH）活力，胞内Ca^2 ,K^ 含量，观察真菌孢子对细胞膜通透性的影响，结果表明，室内常见气传真菌孢子能显影响CHL细胞的活性，并可使细胞膜通透性发生改变，引起胞内LDH外渗，细胞内外离子发生交换，细胞内K^ 浓度降低，而细胞外的Ca^2 有内流的趋势。     

The relationships between air pollutants, meteorological parameters and concentration of airborne fungal spores

Fungal spores are an important component of bioaerosol and also considered to act as indicator of the level of atmospheric bio-pollution. Therefore, better understanding of these phenomena demands a detailed survey of airborne particles.The objective of this study was to examine the dependence of two the most important allergenic taxa of airborne fungi - Alternaria and Cladosporium - on meteorological parameters and air pollutant concentrations during three consecutive years (2006-2008). This study is also an attempt to create artificial neural network (ANN) forecasting models useful in the prediction of aeroallergen abundance.There were statistically significant relationships between spore concentration and environmental parameters as well as pollutants, confirmed by the Spearman’s correlation rank analysis and high performance of the ANN models obtained. The concentrations of Cladosporium and Alternaria spores can be predicted with quite good accuracy from meteorological conditions and air pollution recorded three days earlier.     

群体感应淬灭菌的分离及其膜污染控制性能

通过淬灭细菌的群体感应系统来抑制生物膜形成、防止膜生物污染的方法近年来受到广泛关注.本实验从实际运行污水处理厂活性污泥中分离出5株具有群体感应淬灭功能的菌株,其中菌株HG10对信号分子N-乙酰高丝氨酸环内酯(C6-HSL)分解能力最强.经16S rRNA基因序列比对,初步鉴定为蜡样芽孢杆菌(Bacillus cereus).用海藻酸钠将菌株HG10进行包埋固定,以探究其在膜过滤系统中对膜污染防治的效果.结果表明,经过8 d培养,添加细菌包埋珠(SA-HG10)的实验组B中膜通量为181.29 L·(m~2·h)~(-1),未投加包埋珠的对照组A膜通量为110.64 L·(m~2·h)~(-1),B组膜通量比A组高出63.86%;对微滤膜片上生物膜中EPS含量测定表明,实验组B中EPS多糖和蛋白质含量较对照组A分别减少了29%和48%,疏水性蛋白质含量的大量减少是造成膜污染减弱的主要原因;膜表面胞外聚合物(EPS)总含量减少了43%,表明投放SA-HG10细菌包埋珠对过滤膜片上生物膜形成具有明显抑制作用,改善了膜过滤性能.     

氯灭活地下水源中3种优势真菌的效能与机制

地下水源中真菌大量繁殖会产生嗅味,引发毒性反应以及产生大量肉眼可见的絮状物,严重影响供水水质.以地下水源中3种优势真菌木霉属、青霉属、枝孢属为研究对象,以氯为消毒剂,通过研究真菌孢子胞内物质泄漏,胞外三磷酸腺苷(ATP),脱氧核糖核酸(DNA)和蛋白质增加及孢子形态变化,探明了氯灭活3种真菌孢子的效能与机制.结果表明,氯灭活真菌孢子符合一级动力学,满足Chick模型,3种真菌的耐氯性为:木霉属青霉属枝孢属,真菌孢子尺寸越大,亲水性越强,灭活效果越好.氯灭活后,胞内物质泄漏,胞外特征物质(ATP、DNA、蛋白质)显著增加;氯对细胞表面破坏严重,灭活后真菌孢子凹陷,表面褶皱.综上所述,氯首先作用于孢子表面,降低孢子的可培养性,进一步作用使细胞的通透性屏障受损,导致胞内特征物质释放,以致孢子死亡.     

不同pH下纳米铁镍颗粒对生物降解苯酚的影响

研究不同pH(8.0、6.0和3.0)下金属纳米颗粒(Fe和Fe/Ni)对纺锤芽孢杆菌(BFN)降解苯酚的影响.实验结果发现pH在8.0和6.0时投加2种金属纳米颗粒(Fe和Fe/Ni)对BFN降解苯酚有促进作用,其原因主要是纳米颗粒在水中持续腐蚀产生H2,为BFN降解苯酚提供电子,促进BFN的生长.但在pH=3.0时,只有BFN-纳米Fe耦合体系才使苯酚得到部分降解,主要是因为纳米Fe颗粒与水反应产生OH-,使pH值有所升高,更适宜BFN的生长,同时提供电子供体H2促进BFN对苯酚的利用.扫描电镜(SEM)和能谱分析(EDS)数据证实金属纳米颗粒(Fe和Fe/Ni)在反应后附着在微生物表面,但微生物的表面形态并未发生显著改变.因此,纳米金属颗粒虽然通过附着影响微生物的活性,但其在腐蚀过程中产生的H2将作为电子供体而被BFN所利用,综合作用的结果是有利于BFN的生长进而提高苯酚的降解速率.     

Iron and lead ion adsorption by microbial flocculants in synthetic wastewater and their related carbonate formation

Although microbial treatments of heavy metal ions in wastewater have been studied, the removal of these metals through incorporation into carbonate minerals has rarely been reported. To investigate the removal of Fe^3＋ and Pb^2＋, two representative metals in wastewater, through the precipitation of carbonate minerals by a microbial flocculant （MBF） produced by Bacillus mucilaginosus. MBF was added to synthetic wastewater containing different Fe^3＋ and Pb^2＋ concentrations, and the extent of flocculation was analyzed. CO2 was bubbled into the mixture of MBF and Fe^3＋/Pb^2＋ to initiate the reaction. The solid substrates were analyzed via X-ray diffraction, transmission electron microscopy and energy dispersive spectroscopy. The results showed that the removal efficiency decreased and the MBF adsorption capacity for metals increased with increasing heavy metal concentration. In the system containing MBF, metals （Fe^3＋ and Pb^2＋）, and CO2, the concentrated metals adsorbed onto the MBF combined with the dissolved CO2, resulting in oversaturation of metal carbonate minerals to form iron carbonate and lead carbonates. These results may be used in designing a method in which microbes can be utilized to combine CO2 with wastewater heavy metals to form carbonates, with the aim of mitigating environmental problems.     

微生物絮凝剂ZS-7的纯化及其结构特征研究

采用透析、乙醇沉淀、凝胶过滤层析对微生物絮凝剂ZS-7进行了纯化.经鉴定纯化后的微生物絮凝剂ZS-7是一种新型的糖蛋白,其产量大约为0.98 g/L发酵液.ZS-7主要由多糖和蛋白质组成,含量分别为91.5%和8.4%.进一步的分析表明ZS-7中含有酸性多糖包括糖醛酸(16.4%)、丙酮酸(7.1%)和乙酸(0.5%).采用凝胶色谱法测得ZS-7的相对分子质量为6.89×104.红外光谱、X射线能谱图和核磁共振图谱说明糖蛋白絮凝剂ZS-7含有羟基、氨基、羧基、甲氧基和磺酸等功能性基团.单糖组成分析说明ZS-7主要由鼠李糖、甘露糖、葡萄糖和半乳糖组成,各单糖的摩尔比大致为:半乳糖∶葡萄糖∶甘露糖∶鼠李糖=142∶2.2∶4.5∶3.4.     

Alga-lysing bioreactor and dominant bacteria strain

Alga-lysing bacteria have been paid much attention to in recent years. In this study, the alga-lysing strain P05 which was isolated from an immobilizing biosystem was immobilized by coke and elastic filler, forming two biological reactors. The removal efficiencies of algae, NH4^＋-N and organic matter using the two reactors were studied. The results showed that strain P05 was an ideal algal-lysing bacteria strain because it was easy to be immobilized by coke and elastic filler which are of cheap, low biodegradability and the simple immobilization procedure. After 7 d filming, the biological film could be formed and the reactors were used to treat the eutrophic water. These two reactors were of stability and high effect with low cost and easy operation. The optimal hydraulic retention time （HRT） of each reactor was 4 h. The algae removal rates were 80.38% and 82.1% （in term of Chl-α） of coke reactor and filler reactor, respectively. And that of NH4^＋-N were 52.3% and 52.7%. The removal rates of CODMn were 39.03% and 39.64%. The strain P05 was identified as Bacillus sp. by PCR amplification of the 16S rRNA gene, BLAST analysis, and comparison with sequences in the GenBank nucleotide database.