A new approach to quantify the degradation kinetics of linuron with UV, ozonation and UV/O3 processes

The degradation of linuron, one of phenylurea herbicides, was investigated for its reaction kinetics by different treatment processes including ultraviolet irradiation (UV), ozonation (O₃), and UV/O₃. The decay rate of linuron by UV/O₃ process was found to be around 3.5 times and 2.5 times faster than sole-UV and ozone-alone, respectively. Experimental results also indicate overall rate constants increased exponentially with pH above 9.0 while the increase of rate constants with pH below 9 is insignificant in O₃ system. All dominant parameters involved in the three processes were determined in the assistant of proposed linear models in this study. The approach was found useful in predicting the process performances through the quantification of quantum yield (rate constant for the formation of free radical HOO⁻ from ozone decomposition at high pH), rate constant of linuron with ozone (k_O3,LNR), rate constant of linuron with hydroxyl radical (k_OH,LNR), and α (the ratio of the production rate of OH and the decay rate of ozone in UV/O₃ system).     

Quantification of nitrate leaching from German forest ecosystems by use of a process oriented biogeochemical model

Simulations with the process oriented Forest-DNDC model showed reasonable to good agreement with observations of soil water contents of different soil layers, annual amounts of seepage water and approximated rates of nitrate leaching at 79 sites across Germany. Following site evaluation, Forest-DNDC was coupled to a GIS to assess nitrate leaching from German forest ecosystems for the year 2000. At national scale leaching rates varied in a range of 0–>80 kg NO₃–N ha⁻¹ yr⁻¹ (mean 5.5 kg NO₃–N ha⁻¹ yr⁻¹). A comparison of regional simulations with the results of a nitrate inventory study for Bavaria showed that measured and simulated percentages for different nitrate leaching classes (0–5 kg N ha⁻¹ yr⁻¹:66% vs. 74%, 5–15 kg N ha⁻¹ yr⁻¹:20% vs. 20%, >15 kg N ha⁻¹ yr⁻¹:14% vs. 6%) were in good agreement. Mean nitrate concentrations in seepage water ranged between 0 and 23 mg NO₃–N l⁻¹.     

Beach topography mapping—a comparsion of techniques

A comparison of current techniques for measuring elevations in the beach and near-shore zones is presented. Techniques considered include traditional methods such as ground survey along transects and airborne stereophotogrammetry, and also newer methods based on remote sensing such as airborne scanning laser altimetry (LiDAR). The approach taken was to identify a representative group of users of beach elevation data, elicit their requirements regarding these data, then assess how well the different methods met these requirements on both technical and financial grounds. Potential users of beach height measurements include those concerned with coastal defence, coastal environmental management economic exploitation of the intertidal zone, and coastal flood forecasting. Three test areas in the UK were identified covering a range of such users and also different beach types. A total of 17 basic user requirements were elicited. For each requirement each method was scored according to the degree to which it could meet the requirement. Total scores were calculated and each method ranked. This was undertaken for all the requirements together, for a subset relating to survey of narrow beaches, and for a subset relating to survey of wide beaches. Approximate costs were also established for the top six methods. Airborne stereophotogrammetry proved to be the best method technically, but was also the most expensive. Ground survey provides very good technical performance on narrower beaches at moderate cost. Airborne LiDAR can achieve good technical performance on both narrow and wide beaches at lower cost than ground survey. The satellite-based waterline method was also inexpensive and gave good results on wide beaches. An overall conclusion is that, while the traditional methods of ground survey and airborne stereophotogrammetry remain the best for engineering-related surveys requiring high levels of accuracy, airborne LiDAR in particular looks set to have a significant impact on beach survey for applications for which a vertical accuracy of 20 cm is acceptable, provided that its technology evolves satisfactorily.     

Evaluating the ability of habitat suitability models to predict species presences

Models predicting species spatial distribution are increasingly applied to wildlife management issues, emphasising the need for reliable methods to evaluate the accuracy of their predictions. As many available datasets (e.g. museums, herbariums, atlas) do not provide reliable information about species absences, several presence-only based analyses have been developed. However, methods to evaluate the accuracy of their predictions are few and have never been validated. The aim of this paper is to compare existing and new presence-only evaluators to usual presence/absence measures.     

Modelling periphyton in irrigation canals

Periphyton developments in water distribution canals induce major disturbances for system management, such as clogging problems when fixed algae are detached. Periphyton models can be used to simulate and improve canal management. The purpose of this paper is to review the periphyton models which integrate a hydrodynamic effect, and to discuss their relevance for application in open-channels. Afterwards, a new model of periphyton detachment that integrates the hydrodynamic factor is proposed. An experiment in semi-real conditions is performed to compare periphyton development under four different hydrodynamic regimes. The proposed model is compared on experimental results with two existing models. The new model reproduces well the periphyton dynamics in the four canals simultaneously.     

A model testing study for the transfer of radioactivity to fruit

This paper compares predictions of the foodchain model SPADE with experimental data for the transfer of (134)Cs and (85)Sr to strawberry plants following acute foliar and soil contamination. The transfer pathways considered in this exercise included direct deposition to fruit, leaf-to-fruit, soil-to-leaf and soil-to-fruit transfers. Following foliar contamination, the difference between predicted and measured radionuclide activity values varied between a factor of 0.5-10 for fruit and 4.5-7 for leaf. Following soil contamination, the difference between predicted and measured values varied between a factor of 3-74 for fruit and 32-44 for leaf. In all cases the difference between measured and predicted values was smaller for (85)Sr than (134)Cs. Measured and predicted activities were higher for leaf than fruit. Both measured and predicted (134)Cs concentrations in fruit and leaf are higher when deposition occurs at ripening than at anthesis. These results confirm the need for more data on fruit, even for Cs and Sr, to support models in predicting the transfer of radionuclides to fruit crops. Ongoing research projects funded by the UK Food Standards Agency aim to provide some data on radionuclide transfer to herbaceous, shrub and tree fruits, which will help improve radiological assessment models in order to provide better protection for consumers.     

Parameterizing,evaluating and comparing metapopulation models with data from individual-based simulations

Due to the lack of sufficient data and appropriate ecological information parameterizing predictive population dynamical models usually is a difficult task. The approach proposed in this study is meant to overcome this problem by using detailed individual-based simulations to generate artificial data. With short-term data samples, the models to be investigated can be parameterized and their predictions be compared. The flexibility of individual-based simulations as experimental tools also facilitates the evaluation and comparison of different (aggregated) model types. The presented approach is a step towards unifying models of different complexity. As an example we applied it to two metapopulation models of insect species in a highly fragmented landscape: the well-known incidence function model with a patch-based representation of space and a grid-based analogue. The models are tested with respect to their data requirement and recommendations for a better data sampling are derived.     

Soil organic carbon dynamics of croplands in European Russia: estimates from the “model of humus balance”

The Model of Humus Balance was used to estimate the influence of climate effects and changing agricultural practices on carbon (C) levels in soddy–podzolic soils in the Russian Federation for the years 2000–2050. The model was linked with a spatial database containing soil, climate and farming management layers for identification of spatial change of C sequestration potential. Analysis of relationships between C, soil texture and climate indicated that compared with a business-as-usual scenario, adaptation measures could increase the number of polygons storing soil organic carbon (SOC) by 2010–2020. The rate of possible C loss is sensitive to the different climate scenarios, with a maximum potential for SOC accumulation expected in 2030–2040, thereafter decreasing to 2050. The effect is most pronounced for the arid part of the study area under the emission scenario with the highest rate of increase in atmospheric CO₂ concentration, supporting findings from the dynamic SOC model, RothC. C sequestration during the study period was permanent for clay and clay loam soils with a C content of more than 2%, suggesting that C sequestration should be focused on highly fertile, fine-textured soils. We also show that spatial heterogeneity of soil texture can be a source of uncertainty for estimates of SOC dynamics at the regional scale. Figures in color are available at     

Vertical migration of radionuclides in undisturbed grassland soils

Literature data on numerical values obtained for the parameters of the two most popular models for simulating the migration of radionuclides in undisturbed soils have been compiled and evaluated statistically. Due to restrictions on the applicability of compartmental models, the convection–dispersion equation and its parameter values should be preferred. For radiocaesium, recommended values are derived for its effective convection velocity and dispersion coefficient. Data deficiencies still exist for radionuclides other than caesium and for soils of non-temperate environments.     

A review and test of predictive models for the bioaccumulation of radiostrontium in fish

Empirical relations between the ⁹⁰Sr concentration factor (CF) and the calcium concentration in freshwater aquatic systems have previously been determined in studies based on data obtained prior to the Chernobyl accident. The purpose of the present research is to review and compare these models, and to test them against a database of post-Chernobyl measurements from rivers and lakes in Ukraine, Russia, Belarus and Finland. It was found that two independently developed models, based on pre-Chernobyl empirical data, are in close agreement with each other, and with empirical data. Testing of both models against new data obtained after the Chernobyl accident confirms the models’ predictive ability. An investigation of the influence of fish size on ⁹⁰Sr accumulation showed no significant relationship, though the data set was somewhat limited.