Mobility and sulfidization of heavy metals in sediments of a shallow eutrophic lake,Lake Taihu,China

The technique of DGT (diffusive gradients in thin films) using three diffusive gel thicknesses was applied to estimate the mobility and bioavailability of heavy metals in sediments and porewater of Lake Taihu, China. The DGT results showed significantly positive correlations between Co, Pb, Cd and Mn, and Ni and Fe concentrations in porewater. Cu and Zn showed a significantly negative correlation with Mn, due to Cu combination with carbonates and Zn derived from agricultural pollution, respectively. The rank order of average concentrations of Co, Ni and Cd at each station was DGT_1.92 > DGT_0.78 > DGT_0.39, suggesting stronger resupply from sediments to porewater when using thicker diffusive gels. Comparing centrifugation and DGT measurements, Co, Ni and Cd are highly labile; Mn and Fe are moderately labile; and Cu, Zn and Pb are slightly labile. The variations of AVS concentrations in sediment cores indicate that metal sulfides in deeper layers are easily diffused into surface sediments.     

巢湖沉积物有效磷的原位高分辨分析研究

将两种原位被动采样技术——高分辨平衡式间隙水(HR-Peeper)与氧化锆薄膜梯度扩散技术(Zr-oxide DGT)相结合,分别对巢湖西半湖7个点位溶解态反应性磷(cPW)和有效磷(cDGT)进行原位测定分析,cPW和cDGT在大部分沉积物剖面的分布相似或局部相似,说明不同深度沉积物固相有效磷组分对间隙水SRP的缓冲能力较接近.利用界面扩散通量和cDGT/cPW比值(R)表征沉积物磷的活性,从巢湖湖心向南淝河入湖口方向,界面以下6 mm的cPW、cDGT和扩散通量的变化基本一致,均呈递增趋势,表明沉积物磷的污染水平在增加;R值变化较小,说明沉积物界面处的缓冲能力差异不明显.     

Investigation of trace metal binding properties of lignin by diffusive gradients in thin films

The binding behavior of lignin for Pb, Cu, Co, Mn, Cd and Ni was studied using the diffusive gradients in thin films technique (DGT). Samplers with different structures of diffusive gel were used in the well-stirred systems containing known concentrations of metals along with (a) 10, 20 and 40 μM lignin and; (b) 0.64 and 6.47 μM Suwannee river fulvic acid + 40 μM lignin at an ionic strength of 0.01 M (NaNO₃) and pH = 7. Diffusion coefficients of lignin complexes in acrylamide gels were estimated and found to be less than 5% of the equivalent coefficients for the uncomplexed metal ions. These values were used to calculate concentrations of labile metals from DGT measurements in solutions, where lignin could discriminate metals in the order of Pb⁺² > Cu⁺² > Cd⁺² > Ni⁺² > Co⁺² > Mn⁺². Stability constants (Log K) were calculated using Visual MINTEQ II and WHAM V software. The K values were compared with the stability constants from titration of Pb and Cd with 10 μM lignin aqueous samples and with those of humic substances in natural waters. The constants obtained from measurement of complexing capacities might bias the real corresponding values unless two line regression analyses on titration data are considered. The DGT study of fractionation of metal species at varying ratios indicated that the proportion of organic complexes decreased with increasing ratios and gradually more metals were exchanged with inorganic phases. Speciation of Pb and Cd is affected by the concentrations of FA, Cd is dominantly bound with FA while Pb is evenly partitioned between the ligands. The comprehensive knowledge of metal-lignin complexes sheds some light on in situ operational speciation information that can be achieved by DGT.     

Mobility of radium and trace metals in sediments of the Winterbeek: Application of sequential extraction and DGT techniques

For several decades, phosphate ores containing ²²⁶Ra as well as several trace metals have been processed in Belgium to produce calcium phosphate for use in cattle food. The waste water is discharged in two small rivers, the Laak and the Winterbeek.In this study, the levels of ²²⁶Ra and trace metals in surface water and sediments of the Winterbeek were investigated and the mobility of these compounds was assessed using DGT (Diffusive Gradient in Thin Films) and sequential extraction techniques.The concentrations of ²²⁶Ra and trace metals in water and sediment indicate a decreasing trend in inputs to the Winterbeek.The mobility of ²²⁶Ra, assessed by DGT, is related to the reductive mobilization of Fe. The sequential extraction technique shows that at some stations an important fraction of ²²⁶Ra is found to labile sediment phases.Diffusive ²²⁶Ra sediment fluxes, are however, relatively small and have only a minor contribution to the water column concentration of ²²⁶Ra.     

Predicting molybdenum toxicity to higher plants: Estimation of toxicity threshold values

Four plant species (oilseed rape, Brassica napus L.; red clover, Trifolium pratense L.; ryegrass, Lolium perenne L.; and tomato, Lycopersicon esculentum L.) were tested on ten soils varying widely in soil properties to assess molybdenum (Mo) toxicity. A larger range (66-fold-609-fold) of added Mo concentrations resulting in 50% inhibition of yield (ED₅₀) was found among soils than among plant species (2-fold-38-fold), which illustrated that the soils differed widely in the expression of Mo toxicity. Toxicity thresholds based on soil solution Mo narrowed the variation among soils compared to thresholds based on added Mo concentrations. We conclude that plant bioavailability of Mo in soil depends on Mo solubility, but this alone did not decrease the variability in observed toxicity enough to be used in risk assessment and that other soil properties influencing Mo toxicity to plants need to be considered.     

利用DGT高分辨率研究沉积物孔隙水中重金属的浓度和释放通量

2006年5月采集了大辽河河段3个柱状沉积物,测定了沉积物的理化性质和重金属元素的含量,并利用常规离心方法和DGT方法测定了柱状沉积物孔隙水中重金属元素的含量.研究发现沉积物中Cd、Co、Cr和Cu元素含量高低的顺序依次是Cr>Cu>Co>Cd.用DGT方法测定的孔隙水中Cd、Co、Cr和Cu的浓度比用离心方法测定的浓度要低.DGT测定的孔隙水中Cd、Co、Cr和Cu的浓度c_DGT与离心方法测定的孔隙水浓度c的平均比值R分别为0.389、0.328、0.863和0.403,这说明沉积物中这几种金属从固相到液相的再补给速率大小遵循如下规律：Cr>Cu>Cd>Co.沉积物中Cd、Co、Cr和Cu元素的释放通量分别为1.12×１０^{-7～3.28×10-7　nmol/(cm2·s)、2.48×１０-7～10.40×10-7　nmol/(cm2·s)、8.80×１０-6～12.65×10-6 nmol/(cm2·s)和6.14×１０-6～13.93×10-6　nmol/(cm2·s).相关分析结果表明,Cd和Cu元素的迁移转化主要受有机质影响;而Cr元素的迁移转化除了受有机质影响外,还受铁锰氧化物影响比较显著;而Co元素可能受氧化还原电位影响较大.}     

Mobility and sulfidization of heavy metals in sediments of a shallow eutrophic lake, Lake Taihu, China

The technique of DGT (diffusive gradients in thin films) using three diffusive gel thicknesses was applied to estimate the mobility and bioavailability of heavy metals in sediments and porewater of Lake Taihu, China. The DGT results showed significantly positive correlations between Co, Pb, Cd and Mn, and Ni and Fe concentrations in porewater. Cu and Zn showed a significantly negative correlation with Mn, due to Cu combination with carbonates and Zn derived from agricultural pollution, respectively. The rank order of average concentrations of Co, Ni and Cd at each station was DGT_1.92 > DGT_0.78 > DGT_0.39, suggesting stronger resupply from sediments to porewater when using thicker diffusive gels. Comparing centrifugation and DGT measurements, Co, Ni and Cd are highly labile; Mn and Fe are moderately labile; and Cu, Zn and Pb are slightly labile. The variations of AVS concentrations in sediment cores indicate that metal sulfides in deeper layers are easily diffused into surface sediments.     

Copper complexation by tannic acid in aqueous solution

The speciation of titrated copper in a dissolved tannic acid (TA) solution with an initial concentration of 4 mmol organic carbon (OC)/l was investigated in a nine-step titration experiment (Cu/OC molar ratio = 0.0030–0.0567). We differentiated between soluble and insoluble Cu species by 0.45 μm filtration. Measurements with a copper ion selective electrode (ISE) and diffusive gradients in thin films (DGT) were conducted to quantify unbound Cu(II) cations (‘free’ Cu) and labile soluble Cu complexes. For the DGT measurements, we used an APA hydrogel and a Chelex 100 chelating resin (Na form). Insoluble organic Cu complexes (>0.45 μm) was the dominant Cu species for Cu/OC = 0.0030–0.0567 with a maximum fraction of 0.96 of total Cu. At Cu/OC > 0.0100, Cu-catalysed degradation of aggregate structures resulted in a strong increase of free Cu and (labile) soluble Cu complexes with a maximum fraction of 0.28 and 0.32 of total Cu, respectively. Labile (i.e. DGT-detectable) soluble Cu complexes had a relatively high averaged diffusion coefficient (D) in the APA hydrogel (3.50 × 10⁻⁶– 5.58 × 10⁻⁶ cm² s⁻¹).     

Phosphorus removal from sediments by Potamogeton crispus: New high-resolution in-situ evidence for rhizosphere assimilation and oxidization-induced retention

Macrophytes are usually chosen for phytoremediation tools to remove P in eutrophic aquatic ecosystems, but the lack of test methods hinders the understanding of removal mechanism and application. In this study, we used the novel technologies combined of Diffusive gradients in thin films (DGT), Planar optode (PO), and Non-invasive micro-test technology (NMT) to explore P dynamics in water-sediment continuum and rhizosphere of Potamogeton crispus over time. Results of the high-resolution in situ measurement showed that labile P(LP_DGT) fluxes at the surficial sediment significantly decreased from approximate 120, 140, and 200 pg/ (cm²?sec) via 30 days incubation period to 17, 40, and 56 pg/(cm²?sec) via that of 15 days. Obvious synchronous increase of LP_DGT was not detected in overlying water, suggesting the intense assimilation of dissolve reactive P via root over time. PO measurement indicated that O₂ concentration around the rhizosphere remarkably increased and radially diffused into deeper sediment until 100% saturation along with the root stretch downwards. NMT detection of roots showed the obvious O₂ inflow into root tissue with the uppermost flux of 30 pmol/(cm²?sec) from surroundings via aerenchyma on different treatment conditions. Different from previous reports, gradually saturating O₂ concentrations around the rhizosphere was principally driven by O₂ penetration through interspace attributing to root stretch downward rather than root O₂ leakage. Increased O₂ concentrations in deep sediment over time finally induced the oxidization of labile Fe(II) into Fe(III) bound P and local P immobilization.     

Diffusive gradients in thin films (DGT) probe for effectively sampling of per- and polyfluoroalkyl substances in waters and sediments

The passive sampling technique, diffusive gradients in thin films (DGT) has attracted increasing interests as an in-situ sampler for organic contaminants including per- and polyfluoroalkyl substances (PFAS). However, its effectiveness has been questioned because of the small effective sampling area (3.1 cm²). In this study, we developed a DGT probe for rapid sampling of eight PFAS in waters and applied it to a water-sediment system. It has a much larger sampling area (27 cm²) and as a result lower method quantification limits (0.15 – 0.21 ng/L for one-day deployment and 0.02 – 0.03 ng/L for one-week deployment) and much higher (by > 10 factors) sampling rate (100 mL/day) compared to the standard DGT (piston configuration). The sampler could linearly accumulate PFAS from wastewater, was sensitive enough even for a 24 hr deployment with performance comparable to grab sampling (500 mL). The DGT probe provided homogeneous sampling performance along the large exposure area. The use of the probe to investigate distributions of dissolved PFAS around the sediment-water interface was demonstrated. This work, for the first time, demonstrated that the DGT probe is a promising monitoring tool for trace levels of PFAS and a research tool for studying their distribution, migration, and fate in aquatic environments including the sediment-water interface.