燃煤电厂海水烟气脱硫工艺原理初探

海水烟气脱硫工艺是利用天然的纯海水（燃煤电厂可直接利用电厂的冷却循环水）作为烟气中ＳＯ２的吸收剂，无需其它任何添加剂，也不产生任何废弃物，具有技术成熟、工艺简单、系统运行可靠、脱硫效率高（理论脱硫效率可达９８％）和投资运行费用低等特点，目前在一些国家和地区已得到日益广泛的应用。本文是在部分模拟试验的基础上，对海水烟气脱硫工艺进行了简单的阐述。     

Combined influence of food level and inoculation density on competition between <Emphasis Type="Italic">Anuraeopsis fissa</Emphasis> and <Emphasis Type="Italic">Brachionus patulus</Emphasis> or <Emphasis Type="Italic">Brachionus macracanthus</Emphasis> (Rotifera: Brachionidae)

We tested separately the effect of two taxonomically related rotifers (B. patulus and B. macracanthus) on the population dynamics of another species (A. fissa) at low (0.5 ×10 ⁶) and high food levels (1.5 × 10⁶ cells/ml of Chlorella vulgaris) using different inoculation densities (0–100%). We also quantified the impact of A. fissa on the two brachionid species. Regardless of the presence of the competing species, an increase in the availability of food led to increase in the abundances of the three rotifers. The population growth of B. patulus, B. macracanthus, or A. fissa was affected negatively when cultured together with another species. An increase in the initial density of any one of the competing species became advantageous to maintain a certain population size. At a low algal food level, B. patulus was able to suppress A. fissa more strongly than B. macracanthus. On the other hand, at a high food level, B. macracanthus suppressed the population of A. fissa more strongly than B. patulus. Peak population densities for A. fissa varied from about 150 to 1000 ind./ml, depending on food density and the presence of competitors. The rate of population increase (r) of A. fissa, B. patulus, and B. macracanthus increased with an increase in food availability but decreased with increasing initial density of the competitor. Both Brachionus spp. experienced negative growth rates in the presence of A. fissa, especially at a high initial density of the latter. Published in Russian in Ekologiya, 2007, Vol. 38, No. 5, pp. 381–390. The article was submitted by the authors in English.     

岷江上游崩塌滑坡分布规律研究

岷江为长江—级支流，上游长３３０ｋｍ，自１９８６年以来，发生崩塌滑坡２００余处，体积约２．１亿ｍ￣３。作者研究了岷江上游崩塌滑坡的分布规律。采用统计指标法，将岷江上游分为三种不同的崩塌滑坡分布密度区：①ＵＸＳ．高密度区；②ＭＸＳ，中密度区；③ＬＸＳ＿３低密度区。     

Pt-Sn/Al2O3蜂窝催化剂催化氧化C6烃

采用等体积分浸法制备Pt-Sn/Al₂O₃蜂窝催化剂（Pt含量仅为0.06wt%）.运用X射线衍射（XRD）、透射电镜（TEM）等技术对催化剂理化性质进行表征,并选取4种代表性C₆烃（苯、环己酮、环己烷和正己烷）对催化剂性能进行评价.活性评价试验中,Pt/Sn比为3/1催化效果最佳.此时4种C₆烃转化率达到90%的温度（T₉₀）较Pt催化剂均降低约20℃,其原因在于Sn可将Pt分割为较小的团簇提高Pt分散度.寿命评价试验以环己烷为例同Pt-Sn蜂窝催化剂连续运行720h,催化活性无明显变化,其原因在于,Sn可有效抑制其粒径增长;Pt₃Sn合金降低表面对C₆烃的吸附,减少催化剂表面积炭.     

石英灯辐射加热条件下低密度碳/酚醛复合材料高温响应及分析

目的研究低密度碳/酚醛复合材料在不同地面加热实验测试响应的差异性,指导材料在实际应用环境下的高温响应分析。方法对低密度碳/酚醛复合材料开展了热流为400 kW/m~2的单侧石英灯辐射加热实验,利用热电偶测温系统测量试件在加热过程中不同位置的温度时间历程,并对试件的烧蚀形貌和微观结构进行观测。同时与热流为464k W/m~2的氧乙炔加热陶瓷板辐射加热实验结果进行对比分析,并且采用有限元方法对材料的传热传质多场耦合计算进行分析。结果对于石英灯辐射加热,在测量点升温到接近200℃时,温度响应拐点都依次出现。由于加热的辐射热源不同,在不同的辐射波段下,多孔材料吸收和发射的热量不同,短时间内氧乙炔加热陶瓷板辐射加热使材料内部升温速率比石英灯辐射加热实验的要快,但长时间加热时现象刚好相反。结论进行传热传质多场耦合计算材料高温响应时,合理确定材料宏观性能随温度的变化至关重要。     

水质中高浓度挥发酚的预测

提出一种以溴水预测法确定高浓度挥发酚稀释倍数 ,为高浓度水样提供了一种科学准确的操作分析方法。简单快速 ,并能确保高浓度挥发酚水样分析的可靠性与成功性 ,具有很大的应用和推广价值     

建设项目审批数据管理系统的设计与实现

本系统根据葫芦岛市环境保护的需要,整合各种环境保护建设项目审批数据,建立Oracle数据仓库,利用PowerBuilder技术完成对环境保护建设项目数据的管理、统计与发布。     

Studies on the use of power ultrasound in solid–liquid myrobalan extraction process

Focus on eco-friendly processing techniques makes vegetable tanning a viable option in leather processing and establishes the subsequent need for the more efficient methods of extraction in tannin manufacture. Application of ultrasound has been tried in the extraction of tannins from myrobalan nuts in order to improve the extraction efficiency, to perform the extraction under milder process conditions and to reduce the process time. The influence of process parameters such as ultrasonic output power, time and temperature has been studied. Scale-up trials and the use of ultrasound in pulse mode have also been attempted. The results show that a three- to fivefold improvement is possible with ultrasonic output from 20 to 100 W. Extraction efficiency has been calculated from the maximum extractable materials from myrobalan nuts. Extraction efficiency is found to be 90% for ultrasound, 100 W without external heating as compared to 77% for control process at 70 °C for 4 h. Therefore, ultrasound could be employed even dispensing with provision for temperature controls. The use of ultrasound in pulse mode offered 70% extraction efficiency of continuous mode. Scale-up trials indicate that there exists an optimum ultrasonic output power depending on the amount of nuts used, to achieve better extraction efficiency. The effectiveness of ultrasonically extracted tannin solution has also been tested in the tanning process for its applicability. The degree of tanning efficacy has been assessed by shrinkage temperature measurement. The results indicate that ultrasonically extracted tannin solution is suitable for tanning process. Therefore, application of ultrasound in tannin extract manufacture is a viable option with added advantages.     

Optimising the environmental benefits of emission reductions from UK coal- and oil-fired power stations: a critical loads approach

This paper describes a method for determining reductions of SO₂ emissions from coal- and oil-fired power stations, oil refineries and large industrial units in the UK taking into account their pollution potential. The method is based on the use of two gridded data sets: critical loads, which represent the sensitivity of the environment to acid deposition and modelled estimates of total (wet + dry) sulphur deposition for 646 point sources within the UK. An iterative method is used to identify and subsequently reduce emissions from point sources that contribute most to areas of critical loads exceedance. This paper demonstrates how the method may be used to determine an optimal allocation of emissions across the UK which yields the maximum amount of environmental protection per unit of emission.The paper then goes on to consider the changes that will have to take place within the UK power generation industry in order to meet the revised EC Large Combustion Plant Directive which comes into force on 1 January 2008. Particular emphasis is placed upon proposed emissions trading schemes and the environmental implications of allowing trading between stations with high and low pollution potentials. The paper concludes by suggesting that the emissions trading process should take into account the pollution potential of each source, irrespective of whether the proposed emission is within the plant's agreed emission limit. An approach based entirely on minimizing environmental damage rather than one which takes cost into account, as in current integrated assessment modelling, could provide an interesting approach across the rest of Europe.     

环境税收制度的效益分析及其对比优势探讨

环境税收制度是未来中国环境政策改革的突破口，相对于其它的环境政策如排污收费与排污权交易等，环境税收其经济效益与环境效益明显，开征环境税收有重要的意义，但在短期内，我国实施环境税收制度的条件尚不成熟，环境政策体系应该采取税费并存，并逐步过渡到以环境税为主的方式。