Mo-N-TiO2光催化剂的制备、表征及其活性提高机制

以钼酸铵和氨水分别为钼源和氮源,采用溶胶-凝胶法制备了Mo-N-TiO2光催化剂,并对其进行了XRD、XPS和UV-visDRS表征。XRD结果表明,Mo、N共掺杂有效抑制了TiO2晶粒的生长,提高了TiO2由锐钛矿向金红石相的转变温度。UV-vis表明,Mo-N-TiO2光催化剂可见光吸收能力增强,吸收带边明显"红移",且钼酸铵添加量(相对TiO2)为0.5%的样品"红移"程度最大,最大吸收带边为550 nm。XPS分析结果表明,Mo取代了TiO2晶格中的部分Ti4+,以Mo6+形式存在的,而N以Ti—N及N—Ti—O形式存在。以罗丹明B为模型污染物,重点考察了钼酸铵添加量与焙烧温度对Mo-N-TiO2光催剂性能的影响。结果表明,400℃焙烧下、钼酸铵添加量为0.5%的样品催化活性最好。模拟太阳光下光照120min对罗丹明B的降解率达到96.8%,是纯TiO2的2.42倍。     

铜卟啉修饰In2TiO5纳米带的制备及其光催化性能

以5,10,15,20-四苯基铜卟啉（CuTPP）和5-（4-氨基苯基）-10,15,20-三苯基铜卟啉（CuAPTPP）为敏化剂,采用溶剂热法成功制备了铜卟啉敏化In₂TiO₅复合光催化剂.利用紫外、FT-IR、XRD、SEM、UV-vis DRS和N₂吸附脱附曲线对所得铜卟啉及复合光催化剂进行表征和分析.结果表明,铜卟啉负载于In₂TiO₅纳米带表面,复合光催化剂的禁带宽度及比表面积出现一定程度的减小,但未改变In₂TiO₅的晶型及形貌.其中,CuTPP敏化In₂TiO₅复合光催化剂的光催化活性最强,在模拟太阳光的照射下,120 min时罗丹明B（RhB）的降解率高达98.9%,而In₂TiO₅纳米带对RhB的降解率仅为33.5%,且循环使用5次后其光催化降解率仍保持在95%以上.     

Efficient degradation of Rhodamine B by magnetically recoverable Fe3O4-modified ternary CoFeCu-layered double hydroxides via activating peroxymonosulfate

Environment-friendly nano-catalysts capable of activating peroxymonosulfate (PMS) have received increasing attention recently. Nevertheless, traditional nano-catalysts are generally well dispersed and difficult to be separated from reaction system, so it is particularly important to develop nano-catalysts with both good catalytic activity and excellent recycling efficiency. In this work, magnetically recoverable Fe₃O₄-modified ternary CoFeCu-layered double hydroxides (Fe₃O₄/CoFeCu-LDHs) was prepared by a simple co-precipitation method and initially applied to activate PMS for the degradation of Rhodamine B (RhB). X-ray diffraction (XRD), fourier transform infrared spectrometer (FT-IR), scanning electron microscope (SEM), transmission electron microscopy (TEM), Brunauer-Emmett-Teller method (BET), and vibrating sample magnetometer (VSM) were applied to characterize morphology, structure, specific surface area and magnetism. In addition, the effects of several key parameters were evaluated. The Fe₃O₄/CoFeCu-LDHs exhibited high catalytic activity, and RhB degradation efficiency could reach 100% within 20 min by adding 0.2 g/L of catalyst and 1 mmol/L of PMS into 50 mg/L of RhB solution under a wide pH condition (3.0-7.0). Notably, the Fe₃O₄/CoFeCu-LDHs showed good super-paramagnetism and excellent stability, which could be effectively and quickly recovered under magnetic condition, and the degradation efficiency after ten cycles could still maintain 98.95%. Both radicals quenching tests and electron spin resonance (ESR) identified both HO? and SO₄^?? were involved and SO₄^?? played a dominant role on the RhB degradation. Finally, the chemical states of the sample's surface elements were measured by X-ray photoelectron spectroscopy (XPS), and the possible activation mechanism in Fe₃O₄/CoFeCu-LDHs/PMS system was proposed according to comprehensive analysis.     

PTFE/TiO_2复合膜光催化降解水中罗丹明B研究

以P25 TiO_2为催化剂、聚四氟乙烯乳液(PTFE)为粘结剂,采用辊压法制备了PTFE/TiO_2复合膜催化剂,并对其进行了SEM和XRD表征。结果表明:TiO_2与PTFE乳液的质量比为4:1时其表面最为平整且分布着均匀的空隙。此外,PTFE的引入并没有改变TiO_2的晶相结构与衍射峰强度。另外,随着光照时间的延长,PTFE/TiO_2复合膜催化表面·OH自由基产生量呈线性增加,且Rh B分子在553 nm处特征吸收峰强度逐渐降低。经过150 min光照后,Rh B的光催化降解率达到87%。连续重复使用14次之后,PTFE/TiO_2复合催化膜的光催化效率仅下降2%左右,这表明其可能在废水深度处理领域得到实用化应用。     

Removal of Rhodamine B under visible irradiation in the presence of Fe⁰, H₂O₂, citrate and aeration at circumneutral pH

A new Vis-Fe⁰-H₂O₂-citrate-O₂ system comprising zero-valent iron, hydrogen peroxide, citrate anion and aeration at circumneutral pH under visible irradiation was studied. 21 μmol L⁻¹ of Rhodamine B (RhB) was chosen as the substrate to be tested. Experiments were conducted under conditions of 2.9 mmol L⁻¹ of H₂O₂, 12.6 g of Fe⁰ and 1.0 mmol L⁻¹ of citrate at pH 7.5. Results showed that, in 1 h reaction, 54% of RhB was removed with corresponding 26% of COD reduced. Meanwhile, the amount of released dissolved irons from Fe⁰ surface was found to be at a very low level as <5.4 μmol L⁻¹. Extinguishing tests with isopropanol suggested that RhB oxidation by hydroxyl radicals was the main process taken place in Vis-Fe⁰-H₂O₂-citrate-O₂ system, which accounted for 75% of substrate removal in 3 h reaction. Control and factor influencing experiments showed that the prohibitive extents of individual factor importance on RhB removal followed a decreasing order of Fe⁰ > H₂O₂ > citrate > Vis > O₂. This study showed an excellent system that could remove refractory organic compounds from water in laboratory researches, and also provided a good idea to reduce secondary contamination by dissolved irons in future investigations.     

活性炭纤维负载柠檬酸铁活化过硫酸氢钾降解罗丹明B的研究

以ACF（活性炭纤维）为载体,制备出一种新的非均相催化剂ACF@Cit-Fe/S〔将Cit-Fe（柠檬酸铁）负载在ACF表面并引入S元素〕,并采用SEM-EDS（电镜-能谱）、XPS（X射线光电子能谱）对其进行表征,研究其活化PMS（过硫酸氢钾）降解染料RhB（罗丹明B）的降解效果.结果表明:①ACF表面成功负载了Cit-Fe和S元素,Cit-Fe和S元素的掺杂增强了ACF催化PMS的性能,能有效降解染料RhB,反应120 min时RhB的脱色率达98%.②ρ（ACF@Cit-Fe/S）、c（PMS）对RhB降解有一定的影响,ρ（ACF@Cit-Fe/S）为0.5 g/L、c（PMS）为6 mmol/L是降解RhB（10 mg/L）的最佳投加量.③温度对RhB降解速率的影响符合阿伦尼乌斯模型,通过计算得出活化能为39.47 kJ/mol,降解过程是一个表面反应控制过程.④以叔丁醇、甲醇、苯酚为分子探针的自由基清除试验显示,SO₄-·（硫酸根自由基）和HO·（羟基自由基）是降解反应过程中主要的自由基,其主要存在于催化剂表面及其周围.研究显示,ACF@Cit-Fe/S能用于活化PMS的高级氧化体系中,ACF@Cit-Fe/S表面丰富的电子转移过程导致其活化PMS的能力增强,从而促进SO₄-·和HO·的产生,提高RhB的降解效率.      

微米SiC/石墨烯复合物光催化降解罗丹明B

为发展低耗和环境友好的有机物降解技术,采用光催化还原制备微米级碳化硅(SiC)/石墨烯复合材料,XRD、FTIR、Raman光谱、XPS和SEM等手段表征其物相组成和形貌结构,并以罗丹明B(RhB)为模拟污染物,研究了复合材料在可见光照射下的光催化活性和稳定性;通过活性物种捕获实验初步探讨了RhB的光催化降解机制.结果表明,SiC与石墨烯复合延长了光生电子和光生空穴的寿命,提高了材料的光催化活性与稳定性.当SiC/石墨烯配比为1∶0. 8时,光照60 min时RhB的降解率可以达到92. 7%,降解过程符合一级反应动力学方程.光催化降解RhB过程中,主要活性物种的贡献依次为:光生空穴(h~+)超氧阴离子自由基(·O_2~-)光生电子(e~-)羟基自由基(·OH).     

应用铁铜双金属有机骨架活化过硫酸盐催化剂去除水中有机污染物的研究

基于MIL-101(Fe)的合成方法,首次采用合成前金属掺杂法制备了双金属有机骨架MIL-101(Fe,Cu)催化剂,并利用X射线衍射仪(XRD)、傅里叶变换红外光谱仪(FTIR)、扫描电镜(SEM)和X射线能谱仪(EDS)对催化剂进行表征.同时,以罗丹明B(Rh B)为目标降解物,研究此催化剂催化过硫酸盐降解Rh B的性能,并初步尝试将催化剂应用于邻苯二甲酸二丁酯(DBP)的催化降解.XRD、FTIR、SEM和EDS等分析结果表明,铜离子的掺杂导致MIL-101(Fe)的结构与形貌发生了改变,提高了对污染物的吸附和催化降解作用.相比MIL-101(Fe),在90 min时MIL-101(Fe,Cu)对Rh B的去除率达到95%,在180 min时对DBP的去除率达到68%.此外,分析了催化剂催化性能提高的原因:配位竞争导致铁离子的不饱和趋向;形貌的变化加强了对污染物的吸附作用.     

Detection of intermediates in the TiO2-assisted photodegradation of Rhodamine B under visible light irradiation

The photocatalytic degradation of dye Rhodamine B （RhB） in the presence of TiO2 nanostdpe or P25 under visible light irradiation was investigated. The degradation intermediates were identified using Infrared spectra （IR spectra）, ^1H nuclear magnetic resonance （^1HNMR） spectra, and gas chromatography-mass spectroscopy （GC-MS）. The IR and the ^1HNMR results showed that the large conjugated chromophore structure of RhB was efficiently destroyed under visible light irradiation in both the photocatalytic systems （TiO2 nanostfipe or P25 and Rhodamine B systems）. GC-MS results showed that the main identified intermediates were ethanediotic acid, 1,2-benzenedicarboxylic acid, 4-hydroxy benzoic acid and benzoic acid, which were almost the same in the TiO2 nanostdpes and P25 systems. This work provides a good insight into the reaction pathway（s） for the TiO2-assisted photocatalytic degradation of dye pollutants under visible light irradiation.     

光电催化转盘电极处理罗丹明B(RhB)模拟废水模型

在转盘式光电液膜反应器(RPEC)反应动力学方程的基础上,综合考虑外加偏压(0—0.4 V)、转盘转速(0—90 r.min-1)、初始浓度(0—100 mg.L-1)、转盘半径(37.5 mm)等因素对反应过程的影响,运用MATLAB软件对转盘转动的反应过程进行模拟计算和推测.计算结果与实验数据能较好吻合,数据误差在10%以内.从而建立了一种不同条件下转盘式光电催化降解废水的降解模型,对实际工业应用具有一定的预测与指导意义.