Study of the influence of melamine polyphosphate and aluminum hydroxide on the flame propagation and explosion overpressure of aluminum magnesium alloy dust

When aluminum magnesium alloy dust floats in the air, a certain ignition energy can easily cause an accidental explosion. To prevent and control the occurrence of accidental explosions and reduce the severity of accidents, it is necessary to carry out research on the explosion suppression of aluminum magnesium alloy dust. This paper uses a vertical glass tube experimental device and a 20 L spherical explosive experimental device to carry out experimental studies on the suppression of the flame propagation and explosion overpressure of aluminum magnesium alloy dust with melamine polyphosphate (MPP) and Al(OH)₃. With increasing MPP and Al(OH)₃ concentrations, the flame brightness darkened, the flame velocity and propagation distance gradually decreased, and P_max and (dp/dt)_max decreased significantly. When the amount of MPP added reached 60%, the flame propagation distance decreased to 188 mm, which is a decrease of 68%, and the explosion overpressure decreased to 0.014 MPa, effectively suppressing the explosion of aluminum magnesium alloy dust. The experimental results showed that MPP was more effective than Al(OH)₃ in inhibiting the flame propagation and explosion overpressure of the aluminum magnesium alloy dust. Finally, the inhibitory mechanisms of the MPP and Al(OH)₃ were further investigated. The MPP and Al(OH)₃ endothermic decomposition produced an inert gas, diluted the oxygen concentration and trapped active radicals to terminate the combustion chain reaction.     

In situ formation of bimetallic FeNi nanoparticles on sand through green technology: Application for tetracycline removal

• In situ preparation of FeNi nanoparticles on the sand via green synthesis approach. • Removal of tetracycline using GS-FeNi in batch and column study. • Both reductive degradation and sorption played crucial role the process. • Reusability of GS-FeNi showed about 77.39±4.3% removal on 4th cycle. • TC by-products after interaction showed less toxic as compared with TC. In this study, FeNi nanoparticles were green synthesized using Punica granatum (pomegranate) peel extract, and these nanoparticles were also formed in situ over quartz sand (GS-FeNi) for removal of tetracycline (TC). Under the optimized operating conditions, (GS-FeNi concentration: 1.5% w/v; concentration of TC: 20 mg/L; interaction period: 180 min), 99±0.2% TC removal was achieved in the batch reactor. The removal capacity was 181±1 mg/g. A detailed characterization of the sorbent and the solution before and after the interaction revealed that the removal mechanism(s) involved both the sorption and degradation of TC. The reusability of reactant was assessed for four cycles of operation, and 77±4% of TC removal was obtained in the cycle. To judge the environmental sustainability of the process, residual toxicity assay of the interacted TC solution was performed with indicator bacteria (Bacillus and Pseudomonas) and algae (Chlorella sp.), which confirmed a substantial decrease in the toxicity. The continuous column studies were undertaken in the packed bed reactors using GS-FeNi. Employing the optimized conditions, quite high removal efficiency (978±5 mg/g) was obtained in the columns. The application of GS-FeNi for antibiotic removal was further evaluated in lake water, tap water, and ground water spiked with TC, and the removal capacity achieved was found to be 781±5, 712±5, and 687±3 mg/g, respectively. This work can pave the way for treatment of antibiotics and other pollutants in the reactors using novel green composites prepared from fruit wastes.     

超疏水表面在提高镁合金耐蚀性能上的研究进展

总结和讨论了超疏水表面提高镁合金耐蚀性能的制备方法。采用电化学测试方法研究了超疏水表面的抗腐蚀行为。总结了在镁合金上制备抗腐蚀性超疏水表面的最新进展,提出了超疏水表面提高镁合金耐蚀性能的机理。镁合金上制备超疏水表面的方法较多,但是能进行大规模生产的较少,且制备的超疏水表面耐久性、机械稳定性较差。     

几种表面防护体系耐盐雾性能研究

目的通过对比试验室加速腐蚀试验结果,获得耐盐雾腐蚀性能最佳的表面防护体系。方法选用2024铝合金的几种不同表面防护体系,进行盐雾腐蚀试验。通过宏观腐蚀形貌和涂层失光率变化来分析判定表面防护体系耐腐蚀性能,获得抗腐蚀性能优异的表面防护体系。结果综合内外部防护体系宏观腐蚀形貌和失光率情况来看,阿洛丁氧化和所配套的三套涂层系统的盐雾适应性较差。结论内部防护体系推荐采用铬酸阳极化+10P4-X底漆防护体系;外部防护体系推荐采用铬酸阳极化+10P20-X底漆+ECL面漆防护体系。     

添加H2O2加速低合金钢海水腐蚀的主要影响因素研究

采用极化曲线、旋转圆盘电极试验和失重（质量损失）法研究了低合金钢在添加了H。o：的海水中腐蚀加速的主要影响因素。结果发现低合金钢在添加H2O2的海水中腐蚀加速主要受到了H2O2浓度、温度、搅拌速度和H2O2添加周期的影响。研究表明,搅拌速度不变、H2O2添加周期相同的条件下,在H2O2浓度为0．8mol／L的70℃海水中,低合金铜的腐蚀加速最显著;在试验的转速范围内,加速作用随搅拌速度增大变得更为显著;H2O2加入后350min内加速作用较明显。     

预腐蚀铝合金材料裂纹萌生寿命评估

铝合金在航空工业中广泛应用,因此对于铝合金构件的寿命评估很重要。利用扫描电子显微镜(SEM)原位观测技术,研究了预腐蚀铝合金试件在循环应力作用下的疲劳裂纹萌生和扩展行为。结果表明腐蚀坑对于裂纹萌生扩展行为具有强烈的影响。基于局部应变法,提出了一种预测带有腐蚀损伤的铝合金疲劳裂纹萌生寿命的评估公式。     

浅论通风隔声窗的发展

分析当前通风隔声窗的现状,以及通风隔声窗发展中的几个关键点,即:安静、节能、智能、清新空气、美观;结合正升声学公司开发的通风隔声窗产品讨论通风隔声窗在未来住宅建筑中的应用。     

温度和溶解氧对5083铝合金海水腐蚀性的影响

采用动电位极化和电化学阻抗试验方法,研究了温度和溶解氧对5083铝合金在海水中腐蚀电化学性能的影响。结果表明,随着溶解氧浓度的降低,铝合金自腐蚀电位负移;随着温度的增加,铝合金点蚀电位负移,阴极过程受扩散控制。腐蚀微观形貌分析表明铝合金在高温高氧状态下主要以均匀腐蚀为主,而在低温低氧状态下发生了明显点蚀。     

7B04铝合金海洋性大气腐蚀研究

通过在青岛和海南开展的7B04铝合金户外大气暴露试验,利用失重分析、形貌观察、断面分析和电化学交流阻抗谱等研究了7B04铝合金在海洋性大气环境中的腐蚀动力学规律和腐蚀特征。结果表明,在青岛和海南等海洋性大气环境中,7B04铝合金腐蚀初期以点蚀形式萌生,随后向均匀腐蚀发展;腐蚀过程均经历了腐蚀速率由高到低的过程,且腐蚀失重与时间的关系均可用幂函数显著回归;电化学阻抗谱分析表明当腐蚀产物足够厚时,7B04铝合金海洋性大气腐蚀的电化学过程由侵蚀性离子的扩散步骤来控制。     

典型铝合金在江津自然大气环境中的腐蚀行为研究

通过在我国江津典型工业污染大气环境进行大气暴晒实验,测定了1060纯铝、2A12铝合金和7A04铝合金在该地区的腐蚀速率,利用扫描电子显微镜（SEM）、能量色散X射线谱（EDX）、红外光谱（FT—IR）和X射线衍射仪（XRD）观察分析3种铝合金腐蚀表面形貌、元素分布和腐蚀产物结构。结果表明：随腐蚀时间的延长,铝及其合金腐蚀产物不断增多,失重数值增加,腐蚀失重与时间的关系呈幂函数规律（C—A t^n）;腐蚀产物形貌呈块状或粒状,呈现不均匀的凹凸形貌;腐蚀产物主要为Al（OH）3和Al2（SO4）3·14H2O;耐蚀性能由强至弱依次为1060〉2A12〉7A04。